• 한국지진공학회논문집
• /
• 제22권5호
• /
• pp.291-298
• /
• 2018

Existing reinforced concrete building structures have seismic vulnerabilities under successive earthquakes (or mainshock-aftershock sequences) due to their inadequate column detailing, which leads to shear failure in the columns. To improve the shear capacity and ductility of the shear-critical columns, a fiber-reinforced polymer jacketing system has been widely used for seismic retrofit and repair. This study proposed a numerical modeling technique for damaged reinforced concrete columns repaired using the fiber-reinforced polymer jacketing system and validated the numerical responses with past experimental results. The column model well captured the experimental results in terms of lateral forces, stiffness, energy dissipation and failure modes. The proposed column modeling method enables to predict post-repair effects on structures initially damaged by mainshock.

• 대한토목학회논문집
• /
• 제10권2호
• /
• pp.11-22
• /
• 1990

본(本) 논문(論文)에서는 보존력(保存力) 및 비보존력(非保存力)을 받는 구조물(構造物)의 비선형(非線形) 유한요소해석(有限要素解析)을 수행(遂行)하기 위하여 기존의 하중증분법(荷重增分法)과 변위증분법(變位增分法)을 효율적(效率的)으로 결합(結合)시킨 수치적(數値的)인 해석(解析)알고리즘을 제시(提示)하였다. 제안(提案)한 알고리즘은 하중증분(荷重增分)과 변위증분(變位增分)이 자동(自動) 생성되도록 하므로써 Snap-Through, Turning-Back과 같은 비선형(非線形) 거동(擧動)을 포함(包含)하는 다양(多樣)한 평형경로(平衡經路)들을 추적(追跡)할 수 있었다.

• 한국지진공학회논문집
• /
• 제7권6호
• /
• pp.17-24
• /
• 2003

이 논문의 주된 목적은 지진을 받는 구조물의 비탄성 거동을 제어하기 위해 Coulomb 마찰감쇠기의 제어성능을 산출하는 것이다. 능력스펙트럼법을 이용하여 다양한 건물의 내진성능이 평가되나, 만약 평가된 성능수준이 목표수준에 미치지 못할 때는 추가적인 감쇠비를 산출하게 된다. 추가적인 감쇠비를 얻기 위한 마찰감쇠기의 리더 마찰력은 등가 점성 감쇠의 개념을 사용하여 산정된다. 이와 같이 제안된 방법의 효과를 증명하기 위해, 다양한 주기와 항복 후 강성비를 가진 단자유도 구조물들에 대하여 수치해석을 수행하였다.

• Steel and Composite Structures
• /
• 제28권3호
• /
• pp.267-278
• /
• 2018

Structures may need retrofitting as a result of design and calculation errors, lack of proper implementation, post-construction change in use, damages due to accidental loads, corrosion and changes introduced in new editions of construction codes. Retrofitting helps to compensate weakness and increase the service life. Fiber Reinforced Polymer (FRP) is a modern material for retrofitting steel elements. This study aims to investigate the effect of deficiency location on the axial behavior of compressive elements of Circular Hollow Section (CHS) steel short columns. The deficiencies located vertically or horizontally at the middle or bottom of the element. A total of 43 control column and those with deficiencies were investigated in the ABAQUS software. Only 9 of them tested in the laboratory. The results indicated that the deficiencies had a significant effect on the increase in axial deformation, rupture in deficiency zone (local buckling), and decrease in ductility and bearing capacity. The damages of steel columns were responsible for resistance and stiffness drop at deficiency zone. Horizontal deficiency at the middle and vertical deficiency at the bottom of the steel columns were found to be the most critical. Using Carbon Fiber Reinforced Polymer (CFRP) as the most effective material in retrofitting the damaged columns, significantly helped the increase in resistance and rupture control around the deficiency zone.

• Wind and Structures
• /
• 제31권4호
• /
• pp.335-350
• /
• 2020

In coastal residential communities, especially along the coastline, flooding is a frequent natural hazard that impacts the area. To reduce the adverse effects of flooding, it is recommended to elevate coastal buildings to a certain safe level. However, post storm damage assessment has revealed severe damages sustained by elevated buildings' components such as roofs, walls, and floors. By elevating a structure and creating air gap underneath the floor, the wind velocity increases and the aerodynamics change. This results in varying wind loading and pressure distribution that are different from their slab on grade counterparts. To fill the current knowledge gap, a large-scale aerodynamic wind testing was conducted at the Wall of Wind experimental facility to evaluate the wind pressure distribution over the surfaces of a low-rise gable roof single-story elevated house. The study considered three different stilt heights. This paper presents the observed changes in local and area averaged peak pressure coefficients for the building surfaces of the studied cases. The aerodynamics of the elevated structures are explained. Comparisons are done with ASCE 7-16 and AS/NZS 1170.2 wind loading standards. For the floor surface, the study suggests a wind pressure zoning and pressure coefficients for each stilt height.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 금형가공 심포지엄
• /
• pp.253-259
• /
• 2002

Micro cell structures with high aspect ratio were fabricated by injection molding method. The mold inserts had dimension $1.9cm\times8.3cm$ composed of a lot of micro posts and were fabricated by LIGA process. The size of the micro posts was $157{\mu}m\times157{\mu}m\times500{\mu}m$ and the gaps between two adjacent posts were $50{\mu}m$. Using Polymethylmethacrylate (PMMA) injection molding was performed. The key experimental variables were temperature, pressure, and time. By controlling these, good shaped mim cell structures with $50{\mu}m$ in wall thickness and $500{\mu}m$ in depth were obtained. In order to understand micro molding mechanism, shape changes of molded PMMA were studied with experimental variables. And the durability of mold insert was investigated, too. The results show that the most important factor in molding processes was the mold temperature that is closely related to the filling of the melt into the micro cavity. And the holding time before cooling showed a great effect on the quality of molded PMMA.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.143-144
• /
• 2006

In this paper, we proposed XP KMPR-1050 negative tone resist to replace SU-8 resist for multi-layer micro-structures and thick plating mold fabrication using UV-LIGA process. XP KMPR resist proposed in this paper can be easily striped using a common stripping solution such as NMP without damage of micro-structure. The conditions for the fabrication of XP KMPR micro-structure were optimized by adjustment of exposure and post-exposure bake(PEB). The $140{\mu}m$ -thick and an aspect ratio at least 10 micro-structure and multi-layer structures were successfully fabricated through the process conditions. Through-mold electroplating and PR striping of XP KMPR has been successfully demonstrated.

• 한국공간구조학회논문집
• /
• 제6권4호
• /
• pp.35-44
• /
• 2006

대공간 구조형식에는 기존의 기둥-보 구조형식에서 벗어나 쉘구조형식과 같은 형태저항 구조형식이 가장 유효한 구조형식으로 인식되고 있다. 특히 지간 $200m{\sim}300m$ 이상의 대공간구주 형식으로는 중량구조인 연속체의 쉘보다는 래티스 돔과 같은 공간 트러스형식 등의 유리하다. 시공, 제작상의 편리성, 구조미 등을 이유로 복층래티스 돔과 더불어 단층의 래티스 돔 형식도 실제 구조물에서 많이 적용되고 있다. 그러나 대공간 단층 래티스 돔의 경우 아직까지 외력의 작용으로 인한 변형과 파괴경로가 명확하게 해명되지 못한 부분이 있다. 본 연구에서는 대공간 구조형식에 적합한 래티스 돔을 대상으로 좌굴의 특성을 규명하여 안정적인 구조 설계의 기초 자료를 제시하기 위하여 실험을 수행하였다. 주된 실험변소는 격자의 간격과 돔의 지붕 강성 유무를 대상을 하였으며, 격자의 간격은 돔을 4분할, 5분할, 6분할, 7분할로 하여 정하였다. 가력은 돔의 전면에 걸쳐 구심의 등분포하중이 작용하도록 하였다.

• 전산구조공학
• /
• 제4권1호
• /
• pp.83-94
• /
• 1991

본 연구에서는 이상화구조요소법을 적용하여 골조구조물의 비선형해석을 높은정도로서 짧은 계산시간에 수행할 수 있는 해석이론과 컴퓨터프로그램을 개발하였다. 이를 위해 골조구조물을 구성하는 보-기둥(Beam-Column)부재에 대한 이상화구조요소를 부재에 존재하는 초기결함의 영향도 고려하여 정식화한다. 요소의 접선탄성강성행렬은 에너지원리를 적용하여 명시적인 형태로 도출하며, 최종강도조건은 요소에 소성붕괴메카니즘이 형성될때를 기준으로 정식화한다. 또한, 요소의 최종강도후 강성행렬도 근사적인 방법을 이용하여 명시적인 형태로 도출한다. 본해석법의 정도와 유용성은 단위부재 및 골조구조모형에 대한 기존의 실험 및 수치해석결과등과 비교하여 확인한다.

• Steel and Composite Structures
• /
• 제22권3호
• /
• pp.589-611
• /
• 2016

The primary objectives of this research are to investigate the energy factor response of steel moment resisting frame (MRF) systems equipped with fuses subject to ground motions and to develop an energy-based evaluation approach for evaluating the damage-control behavior of the system. First, the energy factor of steel MRF systems with fuses below the resilience threshold is derived utilizing the energy balance equation considering bilinear oscillators with significant post-yielding stiffness ratio, and the effect of structural nonlinearity on the energy factor is investigated by conducting a parametric study covering a wide range of parameters. A practical transformation approach is also proposed to associate the energy factor of steel MRF systems with fuses with classic design spectra based on elasto-plastic systems. Then, the energy balance is extended to structural systems, and an energy-based procedure for damage-control evaluation is proposed and a damage-control index is also derived. The approach is then applied to two types of steel MRF systems with fuses to explore the applicability for quantifying the damage-control behavior. The rationality of the proposed approach and the accuracy for identifying the damage-control behavior are demonstrated by nonlinear static analyses and incremental dynamic analyses utilizing prototype structures.