• Journal of Chest Surgery
• /
• 제23권6호
• /
• pp.1049-1056
• /
• 1990

The OXYREX hollow fiber membrane oxygenator developed by joint work of KIST and Green Cross Medical company has been evaluated by experimental investigation and clinical application, In this oxygenator gas exchanges occur through small pores of 0.1pm size which are distributed on 70% of surface of polypropylene hollow fiber. The Oxyrex membrane oxygenator consists of 36 thousand hollow fibers and it has 3.3m2 of gas exchange surface. The Oxyrex membrane oxygenator has unique blood flow path: blood enters the oxygenator passes between the hollow fibers and exits through outlet ports, that provides low transmembrane pressure drop. In the animal experiment and in vitro investigations of Oxyrex oxygenator, it showed low transmembrane pressure difference, effective heat exchanger performance, stable gas transfer function and less blood trauma. The Oxyrex oxygenator been used from March, 1990, to October, 1990, in 40 patients undergoing open heart operations. In the clinical applications of Oxyrex, adequate oxygenation[PaO2, 283$\pm$70mmHg] and carbon dioxide removal[PaCO2, 27\ulcorner6mmHg]were maintained under the condition of FiO2: below 0.6, Hct; 25%, perfusion flow; 2.4 L/min, gas flow: 2.1 L/min. During maximum 365 minutes of cardiopulmonary bypass[CPB] time period, the Oxyrex oxygenator maintained stable condition of PaO2, PaCO2 respectively and it also kept low plasma hemoglobin level. The complement proteins C3 and CH50 were not significantly changed pre to post CPB. There were no complications related to the oxygenator during and after the CPB.

• Archives of Pharmacal Research
• /
• 제14권2호
• /
• pp.188-192
• /
• 1991

Single non-lethal doses of chloroform $(CHCL_3)$ dichlorobromomethane $(CHCL_2Br)$, dibromochloromethane $(CHCIBr_2)$, or bromoform $(CHBr_3)$ were administered to male rats. Routes of exposure including single intraperitional (ip) and subcutaneous (sc) injection were used in order to permit comparison of severity of THM effects and renal toxicity was assessed at varied times following treatment. On an equimolar basis, sc administration of $CHBr_3$ (either 12 or 3 mmoles/kg) is more effective at increasing KW/BW than ip $CHCI_3$ treatment. Plasma urea nitrogen (BUN) following ip THM injections are markedly increased with all four THM at 24 hours post treatment. BUN response to $CHCL_2Br$ and $CHCIBr_3$-effected BUN levels have essentially returned to those of vehicle control. THM sc treatment results in a BUN response similar to that seen following ip treatment, with only the time course being different. With the exception of $CHCL_3$, sc and ip-treatments appear to be equally effective in evoking absolute BUN elevations. These results suggest that THM administration induce renal toxicity dependent upon the route or exposure.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 영호남학술대회 논문집
• /
• pp.171-174
• /
• 2000

We have investigated the CMP slurry properties of silicate oxide thin films surface on CMP cleaning process. The metallic contaminations by CMP slurry were evaluated in four different oxide films, such as plasma enhanced tetra-ethyl-ortho-silicate glass(PE-TEOS), $O_3$ boro-phospho silicate giass( $O_3$-BPSG), PE-BPSG, and phospho-silicate glass(PSG). All films were polished with KOH-based slurry prior to entering the post-CMP cleaner. The Total X-Ray Fluorescence(TXRF) measurements showed that all oxide surfaces are heavily contaminated by potassium and calcium during polishing, which is due to a CMP slurry. The polished $O_3$-BPSG films presented higher potassium and calcium contaminations compared to PE-TEOS because of a mobile ions gettering ability of phosphorus. For PSG oxides, the slurry induced mobile ion contamination increased with an increase of phosphorus contents.

• 한국수산과학회지
• /
• 제38권4호
• /
• pp.239-244
• /
• 2005

The effects of diluents composition on cold storage for olive flounder (Paralichthys olivaceus) sperm were examined in terms of the swimming speed of sperm, the percentage of mobile sperm, and fertilization rates. The following results indicated that cold storage methods with fresh conditions could be employed in olive flounder milt preservation. The preserved sperm of olive flounder that was diluted I: 10 with artificial seminal plasma II (ASP II) and Stein's solution (SS) at $0^{\circ}C$ remained motile for 30 days. The most effective condition for cold storage was ASP II and SS at 0 $0^{\circ}C$ for the sperm, although there is no significant difference statistically. No difference in the fertilization rate was found between fresh sperm and the preserved ones with ASP I, II and SS at 10 days post-storage.

• 성인간호학회지
• /
• 제17권3호
• /
• pp.444-451
• /
• 2005

Purpose: The purpose of this study was to evaluate whether the effect of the Internet diabetic education on plasma glucose in people with hyperglycemic diabetes. Method: A randomized design with control and experimental groups being assessed pre- and post-intervention was used. Twenty-two patients were randomly assigned to an intervention group and 21 to a control group. Participants were requested to input the blood glucose level weekly in http://www.biodang.com by cellular phone or wire Internet for 3 months. The researcher sends optimal recommendations to each patient using short message service(SMS) of cellular phone and wire Internet weekly. Results: Patients in the intervention group had a mean decrease of 1.3% in glycosylated haemoglobin ($HbA_1c$) levels and those in the control group had no significant difference. There was a significant mean change in 2-hour postprandial blood glucose(2HPPG) for the intervention group, with a mean change of-75.2mg/dl. The mean change in the control group was, however, not significant. Conclusion: These findings indicated that a web-based intervention using SMS of cellular phone improved $HbA_1c$ and 2HPPG.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 추계종합학술대회
• /
• pp.747-750
• /
• 2007

본 연구는 부식을 방지하기 위해서는 metal line식각 후 염소 잔유물 과 plasma charge up을 식각 조건, PR strip조건 및 후속 세정 조건을 최적화함으로써 제거해야 한다고 제안 하였다. Metal line에 다량 분포하는 charge up은 후속 세정의 적정 PH와 만났을 때, 하부 tungsten plug의 부식을 유발 하게 된다. Metal line식각 및 PR strip후 세정에 있어 약액의 종류는 부식에 결정적인 영향을 미친다. Galvanic corrosion을 최소화하기 위한 적정 PH, metal attack을 최소화 할 수 있는 chemistry선택, 높은 식각 부산물 제거 효율의 약액, 최적의 $H_2O$처리 조건 등이 metal부식방지에 있어 결정적인 요소임을 확인하였다.

• 한국통신학회논문지
• /
• 제35권11A호
• /
• pp.1091-1096
• /
• 2010

Stiction in microelectromechanical systems (MEMS) has been a major failure mechanism. Especially, in RF MEMS switches, moving parts often suffered in-use and release related stiction problems. Some materials and methods have been used to prevent this problem. Diamond-like carbon (DLC) has not only been used as a protective material owing to its good mechanical properties but also has been used as a hydrophobic material. Its properties could be controlled by post annealing treatment in various conditions. We synthesized DLC films using a radio frequency plasma enhanced chemical vapor deposition (RF PECVD) method on silicon substrates using methane ($CH_4$) and hydrogen ($H_2$) gas. Then, the change of the hydrophobic property of the films was investigated undervarious annealing temperatures in nitrogen and in oxygen ambient. The films, that were annealed above $700^{\circ}C$ in nitrogen ambient, showed a high contact angle of water (> $90^{\circ}$) even though their mechanical property was sacrificed to some degree. The structural variation and the changes of the hydrophobic and mechanical properties of the DLC films were analyzed by Raman spectrum, contact angle measurement, surface profiler, and a nanoindentation test.

• Transactions on Electrical and Electronic Materials
• /
• 제16권4호
• /
• pp.169-172
• /
• 2015

Although, there are several research studies on the engineering of the graphene layers using different etching techniques, there is not any comprehensive study on the effects of using different etching masks in the reactive ion etching (RIE) method on the quality and uniformity of the etched graphene films. This study investigated the effects of using polystyrene and conventional photolithography resist as a etching mask on the engineering of the number of graphene layers, using RIE. The effects were studied using Raman spectroscopy. This analysis indicated that the photo-resist mask is better than the polystyrene mask because of its lower post processing effects on the graphene surface during the RIE process. A single layer graphene was achieved from a bi-layer graphene after 3 s of the RIE process using oxygen plasma, and the bi-layer graphene was successfully etched after 6 s of the RIE process. The bilayer etching time was significantly smaller than reported values for graphene flakes in previous research.

• 마이크로전자및패키징학회지
• /
• 제13권4호
• /
• pp.65-70
• /
• 2006

CVD 및 PECVD법으로 탄소 나노튜브를 성장하고, 그 후 $400{\sim}500^{\circ}C$에서 산화 열처리한 센서의 이산화질소 감지특성을 $200^{\circ}C$ 및 1.5ppm의 이산화질소 농도 하에서 측정하였다. 탄소 나노튜브 센서의 전기저항은 온도 증가에 따라 감소하는 반도체 특성을 보였으며, 이산화질소 흡착에 따라 전기저항은 감소하였다. 공기 중의 수분은 센서감도에 영향을 주고 있으며, 센서를 마이크로파에 3분간 노출하면 센서의 특성은 저하되었다. 또한 CVD법으로 제조한 시편에 비하여 PECVD법으로 성장한 탄소 나노튜브 센서의 감도는 향상 되었다.

• 한국표면공학회지
• /
• 제31권2호
• /
• pp.117-126
• /
• 1998

In this study, the residue remaining on the silicon wafer during the oxide overetching using $C_4F_8/H_2$ helicon were plasmas and effects of various cleaning and annealing methods on the removal of the remaining residue were investigated. The addition of 30%$H_2$ to the C4F8 plasma increased the C/F ratio and the thickness of the residue on the etched silicon surface. Most of the residuse on the etched surfaces colud be removed by the oxygen plasmsa cleaning followed by thermal annealing over $450^{\circ}C$. Hydrogen-coataining residue formed on the silicon by 70%$C_4F_8/30%H_2$ helicon plasmas was more easily removed than hydrogen-free residue formed residue formed by $C_4F_8$ helicon wear plasmas. However, damage remaining on the silicon surface overetched using 70%$C_4F_8/30%H_2$ helicon plasmas was intensive and the degree of reocvery duing the post-annealing was lower.