• Korean Journal of Materials Research
• /
• v.10 no.6
• /
• pp.437-444
• /
• 2000

We investigated the effect of substrate temperature, chemical composition and post-deposition heat-treatment on the crystal structure and electrical transport of $La_{1-x}Sr_xMnO_{3-{\delta}}$(0.19${\leq}x{\leq}$0.31) thin films. As-prepared $La_{1-x}Sr_xMnO_{3-{\delta}}$ films grown at $500^{\circ}C$ by sputter techniques were found to have the pseudo-tetragonal system(a/c=0.97) and a highly preferential <001> orientation. The films were changed to be of the cubic system by post-deposition annealing at around $900^{\circ}C$. A main target of $La_{0.67}Sr_{0.33}MnO_3$ as well as auxliary targets of $La_{0.3}Sr_{0.7}MnO_3$ ceramics were co-sputtered to control the chemical composition of the film. The Sr content(x) of the film ranged from 0.19 to 0.31, depending on the number of the auxiliary target. When x increased from 0.19 to 0.31, the electrical resistivity of the film decreased and the transition temperature between metal and semiconductor shifted to higher temperature. With a magnetic field of 0.18 T, the magneto-resistance ratio (MR(%) = (${\rho}_o-{\rho}_H/{\rho}_H$) of the $La_{0.69}Sr_{0.31}MnO_3$ thin film was about 390%.

• Horticultural Science & Technology
• /
• v.33 no.6
• /
• pp.923-931
• /
• 2015

This study was conducted to investigate petal pigmentation and the expression patterns of anthocyanin-related genes in bicolored roses 'Pinky Girl' treated with temporal heat stress (THS). Cyanin accumulation in petals was correlated with floral bud development and started rapidly as floral buds began to open, defined as the $4^{th}$ stage of floral bud development ($S_4$). This stage seems to be most susceptible to petal pigmentation. The total of cyanin pigmentation at blooming was significantly decreased (by 45.5%) with exposure to THS ($39/18^{\circ}C$ for three days at $S_4$) in comparison with control. Meanwhile, the expression of anthocyanin-related genes such as CHS, CHI, F3'H, DFR, ANS, 3GT, and 5GT was relatively promoted by THS. Only F3H was less expressed (by 26.7%) with THS treatment; thus, F3H could be a key gene for bicolor promotion in 'Pinky Girl' among anthocyanin-related genes. Overall, the expression pattern of the most anthocyanin-related genes did not match the trends of cyanin pigmentation in petals. These results suggest that floral pigmentation could be associated with other mechanisms related to anthocyanin biosynthesis such as post-translational effects and regulatory genes.

• The Journal of Internal Korean Medicine
• /
• v.26 no.2
• /
• pp.353-359
• /
• 2005

Objectives: Dysphagia is a common in stroke patients. Dysphagia often affects the rehabilitation of stroke patients by increasing the risk of nutritional deficits and aspiration pneumonia. Despite the proliferation of physical therapies including swallowing training, much controversy remains regarding the application and benefit of them. Therefore, in this study, the clinical effect of moxibustion at Chonjung(CV17, Shanzhong) on post-stroke dysphagia were assessed using Swallowing Provocation Test(SPT). Methods: Dysphagia subjects were selected by Dysphagia Screening Test. Swallowing function was tested by Swallowing Provocation Test(sec). Direct moxibustion was applied to the acupoint, Chonjung, five times and Swallowing Provocation Test was performed before and after 30 minute. The Latency Time of Swallowing Reflex (LTSR) was checked by SPT. To find factors related with improving swallowing function, Cold-Heat and Excess-Deficiency Diagnosis were considered. Results: A total of 42 patient were included, but two of them were excluded due to severe coughing. Overall, the swallowing reflex improved significantly. In subgroup analysis on brain lesion, non-brain stem lesion patients significantly improved. Moxibustion was more effective in the cold group than in the heat group, but there were no differences between the Excess and the Deficiency groups. Conclusions: The result of this clinical study suggest that moxibustion at Chonjung(CV17, Shanzhong) is an effective treatment for the dysphagia patients after stroke, especially in non-brain stem lesion and the cold diagnosed patients.

• Journal of the Korean Vacuum Society
• /
• v.17 no.1
• /
• pp.23-27
• /
• 2008

We have investigated the effect of annealing on the structural and optical properties of polycrystalline Ga doped ZnO (GZO) films grown on glass substrates by RF-magnetron sputter at room temperature. The structural and optical properties of as-grown GZO films were characterized and then samples were annealed at $400{\sim}600^{\circ}C$ in $N_2$ ambient for 30, 60 minutes, respectively. The field emission scanning electron microscopy (FE-SEM) and X-ray diffraction (XRD) were used to measure the grain size and the crystalline quality of the films. We found that the crystalline quality was improved and the grain size tends to be increased. The optical properties of GZO thin films were analyzed by UV-VIS-NIR spectrophotometers. It is found that optical properties of thin films are increased by annealing and can be used for transparent electrode application. We believe that the appropriate post-growth heat treatment could be contributed to the improvement of GZO-based devices.

• Journal of Life Science
• /
• v.20 no.11
• /
• pp.1634-1639
• /
• 2010

This study was conducted to increase the efficiency of farming practice in rainbow trout, Oncorhynchus mykiss, by sex reversal and chromosome-set manipulation techniques. To obtain phenotypic males, hormonal sex reversal was carried out using an exogenous hormone treatment method. 5 mg of 17 alpha-methyltestosterone per kg diet was supplied for 82 days after first feeding at $10^{\circ}C$ and $13^{\circ}C$. More than 93% of the male population was produced by this method and growth of hormone-treated fish at $13^{\circ}C$ was faster than that of untreated bi-sexual groups. Induced diploid gynogenesis was carried out using artificial insemination of UV-irradiated sperm into haploid eggs. Based on the appearance of the rate of haploid syndrome and survival of embryo, a UV ray dose of at least $3,600\;erg/cm^2$ was required to inactivate rainbow trout sperm genetically. Haploid embryos were restored to diploid by blocking the extrusion of the second polar body using heat shock treatment at $28^{\circ}C$ for 20 min, 10 min post insemination. Gynogenetic diploid sex ratios were confirmed after maturation of the fish erythrocyte measurements and chromosome counts.

• Korean Journal of Animal Reproduction
• /
• v.23 no.4
• /
• pp.313-321
• /
• 1999

The purpose of these study was to investigate the use of a glass micropipette (GMP) as a vessel for vitrification of bovine IVP blastocysts, to compare the post-thaw survival rates of bovine blastocysts frozen in GMP with those frozen in OPS that have been previously investigated, and to improve the hatching rate following vitrification with GMP method. The GMP vessel permits higher freezing and warming rate than the OPS due to the higher heat conductivity of the glass and lower mass of the solution that contains the embryos. Groups of three bovine IVP blastocysts were sequentially placed into vitrification solution before being loaded into either the OPS or GMP vessels and immersed into L$N_2$within 20 to 25 sec. Post-thaw blastocysts were serially washed in 0.25 and 0.15 M sucrose in HM and TCM-199 for each 5 min, respectively, and then cultured in TCM 199 supplemented with 10% FCS for 24 h. The rate of blastocyst re-expanding did not significantly different for OPS (75.9%) and GMP (80.0%) methods (P＞0.05). The hatching rates in OPS (34.1%) and GMP (37.5%) methods were significantly lower than that in control group (54.3%) (P＞0.05). In addition, the rate of blastocyst re-expanding was significantly lower if blastocysts were vitrified in the wide portion of the micropipette rather than the narrow portion of the micropipette (83.3 vs 56.7%) (P＞0.05), even though three blastocysts were loaded per vessel. The hatching rate in 0.05% pronase solution treatment for 30, 60 and 90 see (45.9, 54.7 and 57.5%) were significantly higher than that in control (35.0%), even though there was not significantly different between 30 see and control. These results indicate that both vitrification vessels can provide high survival rates of bovine IVP blastocysts. However, the GMP vessel has the advantage over the OPS, in that the former does not need a cap to protect the vessel from floating after immersion in L$N_2$. The location of the embryos (narrow or wide portion of immersion) were considered to be limiting factors to the viability of bovine IVP embryos. The exposing in 0.05% pronase solution for 60 or 90 see can increase hatching rates of post-thaw bovine IVP blastocysts.

• The Korean Nurse
• /
• v.33 no.5
• /
• pp.63-75
• /
• 1995

The need of oriental nursing role is recently increasing. The implication of this trend is enormous not only for the need of independent of independent oriental nursing intervention. Hence, this study was designed to describe the characteristics of oriental nursing activity and identify the meaning of nursing activity in oriental hospital. A total of 24 nurses were selected by convenience sampling from eight units at one oriental hospital. A total of 168 data were collected using minute-by-minute recording during nurse s work shift. The data were analyzed using nova and scheffe method as post-hoc test The results of this study are as follows; 1. the category of nursing activity in oriental hospital 74.4% of nursing activity was the patient-oriented nursing care. The nursing activity included others (18.28%), the function-oriented nursing care (7.07%), and staff-oriented care (0.2%). 29.1 % of the patient-oriented nursing care was the direct care, and 24. 5 % of the patient-oriented nursing care was the indirect care. There was a lack of patient education and the communication patient. 2. Nursing activity in oriental hospital by characteristics 1) Nursing activity by unit For patient-oriented nursing care, there was a statistically significant difference among 8 units. In the critical care unit, the patient-oriented nursing care was mostly performed. For function-oriented nursing care, there was statistically significant difference among 8 units. In the physical therapy unit, the function-oriented nursing care was mostly performed. 2) Nursing activity in oriental hospital For all kinds of nursing activity, there was a statistically significant difference between shifts. In night shift patient-oriented nursing care, function-oriented nursing care, and other kinds of nursing care was mostly performed. Patient-oriented nursing care included indirect care, treatment set management, and the breaktime. In day shift, staff-oriented nursing care was performed. 3) Nursing activity in oriental hospital For all kinds of nursing activity, there was not a statistically significant difference by day. The day has not impact on nursing activity. 3. the meaning of activity in oriental hospital The results of this study show that the patient-oriented care was vital check, input! output check, medication, bedsore prevention, nasogastric feeding, oral care, catheterization care, perinatal care, nursing care associated with acupuncture and moxacautery, observation (fever, sweating), heat and cold application communication with patent and family, and patient room management In conclusion, two issues associated with the findings of the research appeated to be involved in the difficulty of nursing activity in hospital. The first issue was the nursing care in oriental hospital provided by nurses who have a limited understading of the principles of oriental medicine. The second issue was the deficiency of systematic guideling for oriental nursing activity. The findings suggest the need to develop the systematic guideline for oriental nursing activity. The need of continuing education for nurses who work in the oriental hospital, and the need of nursing education including oriental nursing are critical.

• Journal of Adhesion and Interface
• /
• v.7 no.1
• /
• pp.16-22
• /
• 2006

In this work, the effect of cure temperature and time on the thermal stability and the exothermic cure reaction peak of a waterborne resol-type phenol-formaldehyde resin, which may be used for preparing phenolic sheet molding compounds (SMC), has been investigated using a thermogravimetric analyzer and a differential scanning calorimeter. The weight loss of waterborne phenol-formaldehyde resin was mainly occurred at three temperature stages: near $200^{\circ}C,\;400^{\circ}C$, and $500^{\circ}C$. The carbon yield at $750^{\circ}C$ for the cured resin was about 62%~65%. Their thermal stability increased with increasing cure temperature and time. Upon cure, the exothermic reaction was taken placed in the range of $120^{\circ}C{\sim}190^{\circ}C$ and the maximum peak was found in between $165^{\circ}C$ and $170^{\circ}C$. The shape and the maximum of the exothermic curves depended on the given cure temperature and time. To remove $H_2O$ and volatile components, the uncured resin needed a heat-treatment at $100^{\circ}C$ for 60 min at least prior to cure or molding. Curing at $130^{\circ}C$ for 120 min made the exothermic peak of waterborne phenol-formaldehyde resin completely disappeared. And, post-curing at $180^{\circ}C$ for 60 min further improved the thermal stability of the cured resin.

• Journal of the Korean Institute of Gas
• /
• v.16 no.6
• /
• pp.143-147
• /
• 2012

Photocatalytic properties of $TiO_2$ nanopowders has been received much attention due to their high potentials for environmental applications such as remediation of polluted environments. The $TiO_2$ nanopowders doped with metal or non-metal elements have been synthesized by variety methods such as flame method, chemical vapor synthesis, sol-gel, ion implantation, which affect a doping behavior in different ways resulting in different surface characteristics, leading to different photocatalytic activity. In addition to an effect of synthesis methods, the photocatalytic activity of $TiO_2$ nanopowders can be improved by subsequent heat-treatments. In this study, to obtain a highly efficient photocatalyst, we synthesized $TiO_2$ nanopowders doped with tungsten by the chemical vapor synthesis method (CVS) and determined their physical properties and photocatalytic activity, together with subsequent post-treatment in the range of $300^{\circ}C$ to $700^{\circ}C$.

• Journal of the Korean Electrochemical Society
• /
• v.13 no.4
• /
• pp.256-263
• /
• 2010

A Crofer 22 APU mesh coated with a conductive ceramic material was developed as an alternative cathode current collector to Ag-based materials for solid oxide fuel cells. $(La_{0.80}Sr_{0.20})_{0.98}MnO_3$ (LSM) layer was deposited onto the Crofer mesh using a spray-coating technique, in an attempt to mitigate the degradation of electrical properties due to surface oxidation at high temperatures. The oxidation experiments at $800^{\circ}C$ in air indicated that the areaspecific resistance (ASR) of the LSM-coated Crofer mesh was strongly dependent on the wire diameter and the contact morphology between mesh and cell. In addition, the post-heat-treatment in $H_2/N_2$ resulted in a reduced thickness of Cr-containing oxide scales at the interface between Crofer mesh and LSM layer, leading to a decreased ASR.