• 자동차안전학회지
• /
• 제6권2호
• /
• pp.55-60
• /
• 2014

To verify the performance of roadside safety facilities, strength and occupant protection test are performed by evaluation criteria. Strength test use a truck and occupant protection test use a sedan. Strength perfomance is analyzed pass rate by post lateral resistance of the safety barrier. Occupant protection performance is analyzed from THIV(Theoretical Head Impact Velocity) and PHD(Post-impact Head Deceleration) by crash cushion test.

• International Journal of Advanced Culture Technology
• /
• 제7권2호
• /
• pp.1-6
• /
• 2019

The central purpose of the current research is to identify how 12-week bodybuilding exercise affects muscle dysmorphia. The research subjects consisted of an experimental group and a control group, each with 16 freshmen at college. MDI(muscle dysmorphic inventory), developed by Schlundt, Woodford, Brownlee(2000) was utilized to collect relevant data, which was analyzed by PASW 18.0. An independent two sample t-test was conducted to see whether there exists any significant difference between the two groups in the pre- and the post-tests. A paired t-test, in turn, was performed to identify whether there is any difference between the two tests for each group. The statistical significance level was set at p<.05. It was found that the experimental group marked a higher level of muscle dysmorphia than the control group in the pre-test. It was also found that muscle dysmorphia of the experimental group increased in the post-test, while no significant difference was manifested in the control group in the post-test.

• 한국정밀공학회지
• /
• 제14권8호
• /
• pp.49-56
• /
• 1997

In recent years, ultrasonic technics has been widely applied to industrial fields and its application range has been expanded as a result of continuous research and development. This paper is concerned with development of post-processor program for ultrasonic test and two-axis automatic ultrasonic system for application of industrial fields. Test results of ultrasonic test post-processor program and two-axis auto- matic ultrasonic system have a good agreement with results of ultrasonic evaluation for defect detection in industrial fields. Therefore we think that the developed ultrasonic test post-processor program and two- axis automatic ultrasonic system in this work is very useful for application of industrial fields.

• 항공우주기술
• /
• 제9권1호
• /
• pp.60-66
• /
• 2010

본 논문에서는 항공기 비행시험의 기준 비행 궤적을 획득하기 위해 수행된 GPS 수신기 데이터의 후처리에 대하여 다룬다. 항공기 비행시험은 나로우주센터의 추적 및 통신 장비의 성능을 검증하기 위해 나로호 탑재 시스템과 지상 장비들에 대해 수행된 통합 시험으로서 2007년부터 수차례 수행되었다. 항공기 시험에서 추적 및 항법 장비의 성능을 분석하기 위해서는 데이터 비교를 위한 참값인 기준 데이터가 반드시 필요하므로 본 논문에서는 이를 위해 성능이 검증된 이중주파수용 GPS 수신기인 NovAtel 사의 DL-V3 수신기를 운용하여 비행 데이터를 수집하고, 검증된 후처리 프로그램인 GrafNav로 후처리하여 수십 cm 오차 수준을 가지는 기준 궤적을 생성하였다.

• 아동학회지
• /
• 제29권1호
• /
• pp.275-292
• /
• 2008

This study investigated the effects of a teaching process using dynamic assessment for a unit on young children's measurement ability. Subjects were 45 5-year-old children in a kindergarten in Busan. The instrument was the Dynamic Assessment Tools for Young Children's Measurement Ability (Hwang & Ko, 2(07). Assessment consisted of four steps: pre-test, learning, transfer, post-test. Results were that at post-test, there were significant differences in scores of measurement ability between the dynamic assessment and control groups. In the dynamic assessment group there was significant improvement in length, width and weight between pre- and post-tests and there were significant shifts of measurement strategies and measurement errors between the pre- and post-tests.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.769-774
• /
• 2000

The first thing in developing precast post-tensioned concrete frame system verify the shear resistance capacity of the beam-column connection at which the transfer of member forces become discontinuous. Complying with the necessity of such experimental research, shear tests have been performed for six test specimens which were cast and cured at Dong-Ah Concrete Manufacturing Company and post-tensioning at Concrete Laboratory of Inha University. Shear key and magnitude of post-tensioned force are taken test variables. From the test results, it has been observed that the shear resistance of the specimens attained to higher values than those of theoritical calculations based on the shear friction with shear friction coefficient being 0.6.

• 대한가정학회지
• /
• 제41권11호
• /
• pp.201-214
• /
• 2003

The purpose of this research was to develop the education program for post-divorce adjustment and to evaluate effectiveness of the program. This program was consisted of eight sessions and applied to divorced parents. It was focused for the understanding of grief processes for adults, recovery by forgiveness, children's responses and coping strategies to divorce, open minded relationship between parents and children, and enhancement of self-esteem to be healthy single parent. Results of paired t-test showed that there were significant differences between pre-test and post-test, and the effectiveness remained until follow-up. In conclusion, this program was thought to be effective for improving self-esteem, divorce coping competency and minimizing of the depressions. Continual education is thought to be necessary for maintaining of the effectiveness to the divorced parents.

• Restorative Dentistry and Endodontics
• /
• 제44권4호
• /
• pp.37.1-37.10
• /
• 2019

Objectives: This study evaluated the bond strength of various fiberglass post cementation techniques using different resin-based composites. Materials and Methods: The roots from a total of 100 bovine incisors were randomly assigned to 5 treatment groups: G1, post + Scotchbond Multi-Purpose (SBMP) + RelyX ARC luting agent; G2, relined post (Filtek Z250) + SBMP + RelyX ARC; G3, individualized post (Filtek Z250) + SBMP; G4, individualized post (Filtek Bulk-Fill) + SBMP; G5, individualized post (Filtek Bulk-Fill Flow) + SBMP. The samples were subjected to the push-out (n = 10) and pull-out (n = 10) bond strength tests. Data from the push-out bond strength test were analyzed using 2-way analysis of variance (ANOVA) with the Bonferroni post hoc test, and data from the pull-out bond strength test were analyzed using 1-way ANOVA. Results: The data for push-out bond strength presented higher values for G2 and G5, mainly in the cervical and middle thirds, and the data from the apical third showed a lower mean push-out bond strength in all groups. No significant difference was noted for pull-out bond strength among all groups. The most frequent failure modes observed were adhesive failure between dentine and resin and mixed failure. Conclusions: Fiberglass post cementation using restorative and flowable bulk-fill composites with the individualization technique may be a promising alternative to existing methods of post cementation.

• 대한치과보철학회지
• /
• 제42권3호
• /
• pp.280-293
• /
• 2004

Statement of problem. Glass fiber post is one of recent developments to accommodate esthetic restoration for endodontically treated teeth. This has many advantages over conventional post system in physical properties, esthetic factor, risk of root and restoration fracture, adhesion to core, radiopacity, removal and retrievabilty, biocompatibility and chemical stability. Purpose. This in vitro study was to evaluate the most suitable type of resin core for the glass fiber post through surveying the fracture modes and the maximum load that fractures the tooth. Material and methods. 50 sound maxillary premolars restored with glass fiber posts($ParaPost^{(R)}$ Fiber White) and different types of resin cores(ParaCore, $Z100^{TM}$, $Rebilda^{(R)}$ and $Admira^{(R)}$) were prepared and loaded to faiure in a universal test machine. The maximum fracture load and fracture mode were investigated in the specimens that were restored with resin and those of metal cast and core. With the data, Wilcoxon rank sum test was used to validate the significance between the test groups, and Tukey' s studentized range test was used to check if there is any significant statistical difference between each test group. Every analysis was approved with 95% reliance. Results. On measuring the maximum fracture load of teeth specimens, there was a significant difference between the maximum fracture loads of the tooth specimens. ParaCore showed the highest mean maximum fracture load followed by $Z100^{TM}$. And, the distribution of fracture mode of tooth specimens showed generally Type D, the three parted fracture of the core around the post was mostly seen(62.5%), and specifically, ParaCore showed 90% and $Z100^{TM}$ showed 100% Type D fracture. Conclusion. Referring to the values of maximum fracture load and mean compressive fracture load, ParaCore and $Z100^{TM}$ had high values and are recommended as tooth colored resin core material for glass fiber post. CLINICAL IMPLICATIONS. This study was carried out intending to be of aid in selecting the appropriate resin core for the glass fiber post. The dual cure type composite resin ParaCore and light cure type composite resin $Z100^{TM}$ have good properties and are recommended as tooth colored resin core material for glass fiber post.

• 대한간호학회지
• /
• 제28권4호
• /
• pp.1003-1012
• /
• 1998

The purpose of this research was to identify the effect of human potential seminars on the perceived stigma of adults with epilepsy. The research employed a quasi experimental design and unequivalent control group pre-post design. The test was conducted on 15 adults with epilepsy attending one psychiartric out-patient clinic in Masan City, Korea. The stigma questionnaire was used as a pre-test to these patients. HPS was done ten times for five weeks from May 6, to July 26, 1996. The stigma questionnaire was again given, but this time as a post test. The control group of 14 adults with epilepsy were receiving medication at the same clinic. The human potential seminars were structured by McHolland(1972) and translated by Lee, Hae Seung(1990). The stigma research tool was modified and revised to be appropriate to Korean culture. It consisted of 15 sentences. The internal consistency was 0.92 with Cronbach's α. Research results are as follows. 1) To determine the homogenity of the experimental and control groups, the pre-stigma results were used and democratic-sociologic characteristics, job characteristics and disease related variables were compared. There was no significant difference between the two groups. 2) To identify the relationship between stigma and patient characteristics a pre-test was done. The study used both Mann-Whitney U-test and ANOVA test for statistical analysis. The variables related to stigma were the reason of unemployment and age at onset of epilepsy. 3) The test results of the effect of the human potential seminars on stigma in the patients with epilepsy, showed that stigma in the experimental group was lower than in the control group. The statistical method used to determine the difference between pre and post stigma results was the Wilcoxon signed rank test. The test results were statistically significant at the one percent level. 4) As a follow-up evaluation ten more patients(66.7% of the total) were additionally tested. In order to investigate if the stigmas were different between the pre, post and follow-up, Repeated measure ANOVA was used. The test results showed that the stigma scores were statistically different between the three groups at the one percent level(F=10.06, d.f.=2, p=0.00).