• 항공우주정책ㆍ법학회지
• /
• 제28권2호
• /
• pp.3-35
• /
• 2013

오늘날 항공운송은 국가 간 인적 물적 교류를 위한 최적화된 운송 수단이다. 우리나라는 물론 세계 각국은 효율적인 항공운송을 이용하기 위해 국제항공협정을 체결하여 항공사 노선확장과 운항횟수의 증가 등을 이룩하였지만 동전의 양면처럼 항공운송 사고의 발생가능성도 높아졌다. 항공운송 사고의 발생 빈도는 타교통수단 사고와 비교하였을 때 높지는 않아도 항공사고가 발생하면 대형 참사로 이어진다. 항공운송 사고는 국내 운송사고보다 국제 운송사고가 많으며, 사고가 발생하였을 경우에 항공운송인과 여객 또는 송하인 등의 법적 책임에 대한 분석이 필요하다. 항공운송 사고의 법적 규율에 대한 선순위 판단은 항공운송계약의 종류의 구분이다. 항공운송계약은 객체에 따라 항공여객운송계약과 항공물건운송계약으로 분별된다. 특히 항공여객운송 사고는 인명 피해를 발생시키기 때문에 이에 대한 법적 규율에 대한 논의가 더욱 필요하다. 개정 "상법" 항공운송편은 국제항공운송에서 세계적으로 활용되는 조약들의 내용을 우리 실정에 맞게 반영하여 국제적 기준에 맞으면서 체계상으로도 육상 해상 항공 운송을 포괄하는 특징을 갖고 있다. 그러나 "상법"은 운송계약상 항공운송인의 손해배상책임 문제를 규율하는 몬트리올협약을 주로 반영하면서 동 협약이 가지고 있던 문제로 인하여 국내 상황에 맞게 변형 및 생략을 통해 동 협약의 규정을 수용함으로 인해 발생하는 문제들도 생겨나게 되었다. 특히 여객 손해에 대한 손해배상책임의 발생 원인으로서 사고의 개념은 판례의 해석이 반영된 관련 조약과 "상법"에서 어느 정도 명확한 개념 정의가 필요하다고 할 것이다. "상법" 항공운송편의 모법인 몬트리올 협약은 여객의 사망 또는 신체상해의 원인이 된 사고가 '항공기상에서' 또는 '승강을 위한 작업 중' 발생한 경우에 항공운송인의 손해배상책임에 대하여 규정하고 있으며 이는 바르샤바 협약부터 이를 개정한 전 협약에 걸쳐 동일하게 규정되었고 '사고'의 개념 및 '승강을 위한 작업 중'의 범위와 관련하여 지금까지 논란이 계속되고 있는 중이다. 또한 손해배상의 대상 범주인 여객 손해 중 '신체상해'에 여객이 항공운송 중에 입은 정신적 손해를 포함시킬 수 있는지 여부를 두고 논쟁 중이다. 현행법상 신체적 상해의 경우 특정 상황에서 정신적 손해에 대한 배상이 가능하고 항공사고로 인한 발생한 정신적 손해는 중대한 신체적 상해와 같이 피해자로 하여금 정상적인 생활을 할 수 없게 할 만큼 심각한 피해이다. 그래서 여객의 정신적 손해는 관련 조약이나 "상법"상 신체적 상해에 포함하는 것으로 해석할 필요가 있으며 항공운송인의 합리적인 보호와 남소의 예방 측면에서 명백히 증명될 수 있는 정신적 손해만을 배상하여야 할 것이다. 연착 손해의 배상은 바르샤바 협약, 몬트리올 협약, "상법"은 여객 수하물 및 운송물의 연착으로 인한 항공운송인의 손해배상책임 규정은 있지만 연착에 대한 언급을 하고 있지 않기 때문에 연착에 대한 개념 정리가 필요하다. 연착의 개념에 대한 엄격한 해석은 항공운송인의 안전한 운항을 저해할 소지가 있으므로 여객 수하물 또는 운송물이 항공운송계약에 명시된 도착 예정인 공항에 합의된 시간 내에 또는 이러한 합의가 없을 경우 당해 상황을 고려해 선의의 운송인에게 요구할 수 있는 합리적인 시간 내에 도착 또는 인도되지 아니한 경우를 말한다와 같이 정의하는 것이 옳다고 생각한다. 항공사 약관의 손해는 여객 손해는 대한항공의 국제여객운송약관에 의하면 협약이나 기타 법령에서 정하는 경우 이외에 해당하는 항공운송이나 대한항공이 행하는 서비스로부터 여객에게 발생한 손해는 대한항공이 원칙적으로 책임을 부담하지 않고 대한 항공의 태만 또는 고의적인 과실에 기인하여 발생하였다는 사실이 증명되고 동 손해에 여객의 과실이 개재되지 않았다는 점이 판명된 경우에만 책임을 부담한다. 협약 또는 법령에서 정하지 않은 손해의 경우에는 항공사 측의 과실이 증명된 경우에만 책임을 부담한다는 조항인데 대한항공 약관상 '태만' 또는 '고의적인 과실'이라는 용어의 적합성에 대한 판단이 필요하며 중과실이라고 함이 타당하다고 생각된다. 수하물 손해는 대한항공 국제여객운송약관은 여객의 위탁수하물에 포함되어 있는 전자제품 등의 손상 또는 인도의 지연에 대하여 대한항공은 사실을 알고 있는지 여부에 관계없이 책임을 부담하지 않지만 미국을 출발 또는 도착하는 국제선 운송의 경우에는 그렇지 않다. 따라서 미국을 출발 또는 도착하는 국제선 여객을 다른 나라에 출발 또는 도착하는 국제선 여객을 불합리하게 차별하는 것으로 조약의 내용과 동일하게 물품에 대하여 항공사가 책임을 부담하는 방향으로 개정되어야 할 것이다.

• 대한간호학회지
• /
• 제8권1호
• /
• pp.16-42
• /
• 1978

This survey was made for a month starting from November 15 to December 15, 1977 covering 711 students taking the junior. (3rd-yea.) and the senior. (4th-year) at nine college of nursing in Seoul concerning their perception and Attitude toward the profession of nursing, motive for the necessity of learning, environment of study, attitude of study and particulars relevant with study performance, particulars of library, references and reading, assignments and particulars of the degree of confidence for the learning achievement. Through the survey of the above Particulars, the following results were obtained by classifying all subject matters and by analysing motive of the selection of their course, awarding or not awarding of scholarships. 1. General characteristics: it was revealed that 406 students (57.1%) were attending at the junior. while 305 students (42.9%) were taking the senior. Thus, the total number was 711 and their average age was 21.4 years. Their dwelling category was; 73.9 percent of them resided at their parent's home, 214 students (30.1%) were awarded with scholarships. The reason to be attracted by nursing science was the possibility of continuing social life after graduation (43.5%). 2. Their perception and attitude toward the profession of nursing: According to the perception of profession by the students of each grade, students of the 4th grade showed comparatively strong conception. Also, students of the 4th grade showed more positive attitude in the purchase and reading of magazines relative with the science of nursing, in the reading of Code for Nurses and in their interest in the activity of nursing field. For the necessity of mission of nurse, 97.7 percent of the entire number of students covered responded to necessity. For the necessity of the particular humanity and particularity in the character of nurses, 95.8 percent of those students responded to necessity. By the each grade, students of the 4th grade showed more response. 3. As to professional field desired after completing the professional course: 57 percent of those students desired for clinician nurse while 55 percents desired for community health-nurse. 4. As to the environment of study: they were mostly satisfied with their present residential environment. However, they complained of inconvenience at their lecture-halls. Students of the 3rd grade showed more complain. As to their attitude toward the adjustment of environment of study, they showed a affirmative response. As to the opinion of factors which interfere with their study, comparatively strong response was showed in their scepticism in the science of nursing, insufficient comprehension in general learning, relation with professors n4 discrepancy in the method of study. According to opinions of students at each grade, students of the 4th grade showed more scepticism. 5. Particulars relative with their attitude and performance of study : As to their knowledge of the objectives of their study of subject, the majority was to study with a partial knowledge of the objectives of their study. As to the plan of study, a low percentage indicated management of routine life under regular scheduling. Students of the 4th grade responded to rather planned life. As to time spent in independent study, response to concentrated study when necessary was stronger than that to regular daily study. Students of the 4th grade showed stronger response to regular study than that of the 3rd grade. As to the contents of their note-taking, 67.4 percents of those students responded to such regulatory procedure performing in the lecture-hall as they listen to lectures. 17.3 percents of those students showed response to adding supplementary informations from references to what was entered in choir note-taking at their lecture-halls. 6. Particulars of library, references and reading books: As to receiving of instruction for the utilization of library and time of receiving such instruction 64.7 percents of those students had received such instruction. 66.7 percents of the those responded received such instruction at orientation conducted for freshmen. As to the convenience of the utilization of library, 49.9 percents of those students responded to convenience. However, students of the 3rd grade showed a much stronger response to inconvenience. As to the time of the utilization of library,92.5 percents of those students showed a response to occasional utilization for particular purpose than regular utilization. 53.2 percents of those students responded to ordinary in quantity that library have references. 34.2 percents of those students responded to insufficient. As to the particular relative with the method and field of reading: 53.5 percents of those students responded to intensive reading and was the majority. As to the reading field, fiction u as the majority. When read any books for their major, they usually rend Korean text-b, oks. 7. Particular relative with giving assignment: All respondents were well aware of the objectives of giving home tasks. As to the attitude toward assignments and performing home tasks, 54.8 percents of those students to making ostentatious study because of an excessive quantity of assignments imposed. For performing assignment, they showed comparatively positive response. Also, 52.2 percents of those students responded that they usually submitted complected assignment with references. 8. As to motive to realize the necessity of study : 55.6 percents of those students responded that they realized such necessity in communication with patients when they were engaged in clinical practice. Also, 8.6, the lowest percents of those students responded that they realized such necessity in the course of conversation with nurses when they were engaged in clinical practice. 9. As to the determination of their confidence in the performance of study relative with clinical experience: They showed a general inclination of having in nursing. The major response was that they came to well comprehend the patients families. the lowest response was that they could apply what was learned at lecture-hall to practice. This response incidentally showed the distance the lecture-hall and practical study. In general items, students of the 4th grade showed more favorable response than students of the 3rd grade and there was a significant difference. 10. As to the perception and attitude toward profession according to the motive of selecting the nursing science : Those who selected the nursing voluntarily showed stronger conception than those who selected the nursing through indirect influence. However, there was no significant difference on this point. Only there was a remarkable difference in the reading of Code for Nurses. 11. Those who showed a stronger conception in the profession of nursing according to the motives of attractive nursing science indicated a strong will and ability to manage stable life and comparatively strong response was shown in the management of good home life because of the good adaptability of the science to their character. This group showed a strong conception of the profession than those who responded that they prefer this profession out of a longing for the work of a hospital and for the easy obtaining of opportunity to immigrate to over seas and for economic cause and for high school grade. There was significant difference between these two groups, 12. As to the conception and attitude toward the profession of nursing according to benefits by scholarships, those who were benefitted by scholarship showed stronger conception of profession than those who did not receive scholarship and there was a remarkable difference between these two categories. However, there was no remarkable difference between these two categories in the extent of interest of the activities of nursing fields and in the reading of Code for Nurses. 13. As activation for study according to the benefits of scholarships, those who were benefitted by scholarships showed stronger response to the motive for study comparing with those who receive. 14. As to tile field of reading according to the benefits by scholarships, those who received scholarships tended to read autobiographies and essayers to a considerable extent. Those who did not receive scholarships tended to read novels. Those who received scholarships more read nursing boots than those who did not receive scholarships. 15. As to the attitude of study and doing of assignment according to benefits of scholarships, those who received scholarships managed a favorable life with schedules for study, More students of receiving scholarship showed a regular study for more than one hour per day. Also, in the method of doing home tasks, more students of receiving scholarship showed reference to relative books frequently for the submission of completed assignments.

• Asia Marketing Journal
• /
• 제14권1호
• /
• pp.83-98
• /
• 2012

신차와 중고차가 함께 경쟁하는 시장에서 신차의 경쟁만을 모형화한다면 가격이나 기타 프로모션 탄력성의 추정이 왜곡될 수 있다. 그러나 자동차 시장을 연구대상으로 한 선행연구의 대부분이 신차 시장의 경쟁에만 관심을 기울였던 바, 합리적인 가격결정이나 프로모션 기획에 도움을 주기에 미흡한 점이 있었다. 본 연구는 신차의 가격결정 및 프로모션 기획이 향후 중고차 시장을 통해 리바운드되어 신차 매출에 다시 영향을 미친다는 점을 반영하여 모형을 설정하였다. 즉, 서로 다른 신차간의 (혹은 서로 다른 중고차간의) 교차탄력성보다, 동일 모델의 신차와 중고차간의 교차탄력성이 높다는 가정하에 모형을 설정하였다. 방법론적으로는 네스티드 로짓(Nested Logit) 모형을 설정하여 소비자의 자동차 선택은 단계적으로 이루어진다고 가정하였다. 즉, 1단계에서 자동차 모델을 선택하고, 모델이 정해지면 2단계에서 신차와 중고차 중 선택하는 구조를 가정하였다 실증분석은 미국 전역에서 2009년 1월부터 2009년 6월까지 판매된 모든 컴팩트 카 모델 중에서 시장점유율 상위 9개 모델의 신차와 중고차를 대상으로 하였다. 실증분석을 통하여 비교 대상 모형보다 제안된 모형이 모형 적합도 측면에서 우월하고 예측타당성도 높다는 것을 보여주었다. 제안된 모형으로 부터 추정된 모수를 사용하여 몇 가지 시나리오를 상정하여 시뮬레이션을 실시한 결과, 신차(중고차)가 점유율을 높이고자 리베이트를 실시할 경우 중고차(신차)는 현재의 시장점유율을 유지하기 위해 대응 가격할인을 실시하게 되는데 할인 폭은 반대의 경우에 비해 높다는(낮다는)점을 확인하였다. 또한 시뮬레이션 결과가 시사하는 바는 신차와 중고차가 함께 경쟁하는 시장에서 IIA(Independence of Irrelevant Alternatives)모형을 적용할 경우 동일모델의 신차와 중고차간의 교차 탄력성을 과소평가하게 되어 현상유지를 위한 가격할인을 실시할 경우 적정한 수준이하로 하게 된다는 것이다.

• 한국산림과학회지
• /
• 제42권1호
• /
• pp.83-100
• /
• 1979

본연구(本硏究)는 합판용(合板用) 증량제(增量劑)로 사용(使用)하고 있는 도입소맥분(導入小麥粉)을 값이 싸고 대량생산(大量生產)이 가능(可能)한 낙엽분말증량제(落葉粉末增量劑)로 개발(開發)하여 대치(代置)키 위(爲)한 가능성(可能性)을 구명(究明)하기 위(爲)해서 계획(計劃)하고 착수(着手)되었다. 낙엽증량제(落葉增量劑)로 채취가공(採取加工)하기 위(爲)한 수종(樹種)은 침엽수종(針葉樹種)에서 소나무를 택(擇)하였고 활화수종(濶華樹種)에서는 미류나무, 참나무, 푸라타누스를 택(擇)하였으며, 각각(各各)의 낙엽(落葉)을 채취(採取)하여 $100{\sim}105^{\circ}C$에서 24시간동안(時間同安) 전건(全乾)시킨 다음 40 mesh로 분쇄한 분말(粉末)을 증량제(增量劑)로 사용(使用)하였으며, 이와 비교시험(比較試驗)을 위(爲)해서 소맥분(小麥粉)을 사용(使用)하였는데 소맥분(小麥粉)의 분말도(粉末度)는 100mesh의 것을 이용(利用)하였다. 증량방법(增量方法)은 합판접착용요소수지(合板接着用尿素樹脂)와 석탄산수지접착제(石炭酸樹脂接着劑)에 수종별(樹種別)로 낙엽분말(落葉粉末)과 소맥분(小麥粉)을 각각(各各) 10, 20, 30, 50 및 100%로 증량(增量)하여 합판(合板)을 가공(加工)한 다음 접착력(接着力)을 분석고찰(分析考察)하였다. 본연구(本硏究)에서 얻은 결론(結論)은 다음과 같다. 1) 요소수지접착제(尿素樹脂接着劑)에 10%를 증량(增量)한 합판(合板)의 상태접착력(常態接着力)은 소맥분증량(小麥粉增量)이 가장 높았으며, 다음은 무증량합판(無增量合板)이었고 낙엽분말(落葉粉末)을 증량(增量)한 합판(合板)은 가장 접착력(接着力)이 낮았다. 낙엽분말(落葉粉末)을 증량(增量)한 합판(合板)의 접착력순위(接着力順位)는 참나무 낙엽분말(落葉粉末)이 가장 좋았고 미류나무, 소나무, 푸라타누스낙엽분말(落葉粉末)의 순(順)으로 저하(低下)하였다. 2) 요소수지접착제(尿素樹脂接着劑)에 20%를 증량(增量)한 합판(合板)의 상태접착력(常態接着力)은 소맥분증량(小麥粉增量)이 가장 높았으며 다음은 미류나무낙엽분말증량합판(落葉粉末增量合板)이었으며 이들은 모두 무증량합판(無增量合板)보다 접착력(接着力)이 높았다. 미류나무를 제외(除外)하고 접착력(接着力)이 불량(不良)하지만 낙엽분말증량합판(落葉粉末增量合板)의 접착력순위(接着力順位)는 소나무, 푸라타누소, 참나무의 순(順)으로 낮아졌다. 3) 요소수지접착제(尿素樹脂接着劑)에 30%를 증량(增量)한 합판(合板)의 상태접착력(常態接着力)은 소맥분증량(小麥粉增量)이 가장 높았고 다음은 무증량합판(無增量合板)이었으며 낙엽분말(落葉粉末)을 증량(增量)한 합판(合板)은 접착력(接着力)이 급격히 저하(低下)하여 불량(不良)하였다. 4) 요소수지접착제(尿素樹脂接着劑)에 50%와 100%를 증량(增量)한 합판(合板)은 소맥분증량합판(小麥粉增量合板)만 우수(優秀)한 접착력(接着力)을 보여 주었을 뿐 낙엽분말(落葉粉末)을 증량(增量)한 합판(合板)은 50%에서만 소나무, 미류나무에서 약(弱)한 접착력(接着力)이 측정(測定)되었고 기타(其他)의 낙엽분말(落葉粉末)은 박리(剝離)하였고 100%에서는 모든 낙엽분말증량합판(落葉粉末增量合板)이 박리(剝離)하여 접착력(接着力)이 측정(測定)되지 않았다. 5) 요소수지접착제(尿素樹脂接着劑)에 10%를 증량(增量)한 합판(合板)의 내수접착력(耐水接着力)은 상태접착력(常態接着力)과 같이 소맥분(小麥粉)이 가장 높았고 다음은 무증량합판(無增量合板)이었으며 낙엽분말(落葉粉末)을 증량(增量)한 합판(合板)은 미류나무를 제외(除外)하고 모두 낮은 접착력(接着力)을 나타냈다. 6) 요소수지접착제(尿素樹脂接着劑)에 20%를 증량(增量)한 합판(合板)의 내수접착력(耐水接着力)은 무증량합판(無增量合板), 소맥분증량합판(小麥粉增量合板), 낙엽분말증량합판(落葉粉末增量合板) 순(順)으로 접착력(接着力)이 낮아졌으나 낙엽분말증량합판(落葉粉末增量合板)은 미류나무와 참나무를 제외(除外)하고 박리(剝離)하였다. 7)요소수지접착제(尿素樹脂接着劑)에 30%이상(以上)을 증량(增量)한 합판(合板)의 내수접착력(耐水接着力)은 30%와 50%의 소맥분증량(小麥粉增量)에서 접착력(接着力)이 측정(測定)되었을 뿐 낙엽분말(落葉粉末)은 모두 박리(剝離)하여 접착력(接着力)이 측정(測定)되지 않았다. 8) 석탄산수지접착제(石炭酸樹脂接着劑)에 10%를 증량(增量)한 합판(合板)의 상태접착력(常態接着力)은 소맥분증량(小麥粉增量)이 가장 우수(優秀)하였고 낙엽분말증량합판(落葉粉末增量合板)은 접착력(接着力)이 낮았으나 그 순위(順位)는 참나무, 미류나무, 소나무 순(順)이었고 푸라타누스에서는 박리(剝離)하였다. 9) 석탄산수지접착제(石炭酸樹脂接着劑)에 20%를 증량(增量)한 합판(合板)의 상태접착력(常態接着力)은 소맥분증량(小麥粉增量)이 가장 우수히였으나 소나무 낙엽분말합판(落葉粉末合板)이 그 다음으로 급상승(急上昇)하였으며 다음 순위(順位)는 참나무, 미류나무의 순(順)으로 저하(低下)하였고 푸라타누스는 박리(剝離)하였다. 10) 석탄산수지접착제(石炭酸樹脂接着劑)에 30%를 증량(增量)한 합판(合板)의 상태접착력(常態接着力)은 소나무가 급상승(急上昇)한 접착력(接着力)으로 소맥분증량합판(小麥粉增量合板)보다 우수(優秀)하였으나 미류나무, 참나무는 20%증량(增量) 보다 저하(低下)하는 경향을 나타내었으며 푸라타누스는 박리(剝離)하였다. 11) 석탄산수지접착제(石炭酸樹脂接着劑)에 50%와 100%를 증량(增量)한 합판(合板)의 상태접착력(常態接着力)은 소나무 낙엽분말증량합판(落葉粉末增量合板)과 소맥분증량합판(小麥粉增量合板)이 우수(優秀)한 접착력(接着力)을 보여주고 있는데 반(反)하여 미류나무, 참나무, 푸라타누스등(等) 활엽수낙엽분말(濶葉樹落葉粉末)의 증량(增量)은 박리(剝離)하여 접착력(接着力)이 측정(測定)되지 않았다. 12) 낙엽분말(落葉粉末)의 증량(增量)은 요소수지접착제(尿素樹脂接着劑)에서 미류나무 낙엽분말(落葉粉末)을 20%까지 첨가사용(添加使用)할 수 있으며 석탄산수지접착제(石炭酸樹脂接着劑)에서는 소나무 낙엽분말(落葉粉末)을 소맥분(小麥粉)의 증량(增量)과 똑같이 첨가사용(添加使用)할 수 있다.

• 한국작물학회지
• /
• 제14권
• /
• pp.1-40
• /
• 1973

수도의 다수확을 위하여 근래 다비재배의 경향이 높아가고 있는 반면에 등숙률의 저하가 증수저해요인으로 크게 문제되고 있다. 특히 최근 육성된 통일품종은 이점이 더 심각한 바 있어 등숙의 향상책을 모색하고저 1970년부터 1972년까지 3개년간에 걸쳐 수원 작물시험장포장과 인공기상실에서 주로 진흥과 통일을 공시하여 증숙에 관한 일련의 실험을 시행한 바 그 결과를 요약하면 다음과 같다. 1. 통일의 곡립은 발아등 종래품종에 비하여 세장하고 곡립의 폭 및 두께가 작으며 비중과의 상관관계는 진흥에 있어서는 곡립의 무게, 두께, 폭 및 길이의 순으로 낮으나 통일은 무게, 폭, 두께 및 길이의 순으로 낮았다. 2. 비중별 립수분포에 있어서 종래의 Japonica도는 비중 1.18을 정점으로 대부분 1.12이상에 분포하고 있으나 통일계통에서는 1.12이하의 곡립도 상당수 분포하였고 진흥이 비중 1.06이하에서 정현비율이 급감하고 있으나 통일에 있어서는 비중 1.20에서 0.96까지의 곡립의 정현비율이 별로 차이가 없으므로 1.06을 등숙립의 선별기준으로 삼는 것은 불합리한 것으로 인정된다. 3. 출수후의 등숙속도는 품종간차이가 현저하며 대체로 한랭지 재배품종일수록 느렸으며 통일은 원래 등숙이 빠른 편이나 등숙후기에는 기온의 저하로 인하여 그 속도가 떨어졌다. 4. 지발분얼 또는 약세분얼은 수당영화수도 적을 뿐 아니라 등숙률도 낮은데 통일은 지발분얼이 많고 이들은 저온하에서 출수하여 수전일수가 연장되고 등숙률이 떨어졌다. 5. 통일의 엽신은 짧고 넓으며 엽신전개력은 다비조건에서는 진흥만큼 크고 또 엽의 경사각도는 적어 수광태세가 양호하였다. 통일 엽신의 단위동화능력은 고온하에서는 비교적 크나 저온하에서는 떨어졌다. 6. 통일은 단간이며 하위절간이 짧고 굵어서 도복저항성이 크고 출수전 저장탄수화물이 많았으며 인산, 규산, 석회, 망간 및 마그네슘 등의 체내함유율이 높았다. 7. 통일은 비교적 많은 영화수를 가지고 있고 진흥이 영화수와 등숙률간에 유의적인 역상관이 있음에 비하여 통일은 고온다조하에서는 영화수가 많아도 등숙률은 떨어지지 않고 영화수증가에 비례하여 수량이 많아졌다. 8. 진흥에 비하여 통일의 뿌리는 천근성이며 고온하에서는 그 활력이 컸으나 저온시에는 엽신이 황갈색으로 변하고 그 변색정도에 비례해서 뿌리의 활력도 떨어졌다. 9. 통일은 수광태세가 좋고 동화일호흡균형상 유리한 생산구조를 갖어 진흥보다 이상적인 모형이었다. 10. 수원지방의 수도보통기재배에 있어서 수량생산기간의 일사량은 비교적 풍부한 편이나 8월25일이후에 출수할 때에는 평균기온이 22$^{\circ}C$이하로 빠르게 하강하므로서 기온이 보다 등숙의 제한요인으로 인정된다. 11. 진흥이 저온하에서도 등숙율이 비교적 높은데 통일의 등숙적온은 $25^{\circ}C$이상이며 21$^{\circ}C$이하에서는 완전등숙이 거의 불가능하였다. 12. 진흥은 감광성이 비교적 크고 감온성은 중정도인데 비하여 통일은 감광성은 작으나 기본영양생장성과 저온하의 출수지연도가 컸었다. 13. 진흥은 질소의 후기중점시비에 의하여 등숙율이 향상되고 증수되었으나 통일에 있어서는 기비중점으로 질소를 시용하여 영화를 많이 확보하여도 등숙율저하가 적고 오히려 증수되였다. 14. 진흥은 만식적응성이 비교적 크나 통일은 조식효과가 크고 만식하면 출수가 지연되고 등숙온도가 낮아져서 등숙율과 수량이 떨어졌다. 15. 통일은 내비성과 밀식적응성이 커서 다비밀식조건에서 그 다수성을 발휘하는 특성을 가졌으며 주수 및 묘수증가에 의하여 수전일수가 단축되고 등숙률이 향상되었다. 16. 재식거리를 좁히고 어느 정도 주당묘수를 늘리면 강세분얼비율이 높아졌다. 17. 인산은 저온시에는 등숙율을 상당히 향상시켰다. 이상을 요약해보면 종래품종들의 등숙향상을 꾀하자면 8월20일이전에 출수시켜야 하며 10a당 질소 7.5kg 이상의 과다한 기비를 억제하고 후기중점으로 시비하여 동화효율을 높여야할 것이다. 한편 통일은 곡립이 세장하고 식물체가 작고 뭉툭한 등 종래품종과 판이한 외부형태와 더불어 그 생리생태적 특성도 상이한 점이 많으므로 등숙립선별, 도정 및 재배법상에도 종전품종과 다른 고려가 있어야 할 것이다. 즉 등숙립 선별기준에 대하여는 통일의 비중별 입수분포 및 정현비율로 보아 종래의 등숙립 선별기준인 비중 1.06 보다는 0.96을 적용하는 것이 합리적이고 도정상으로는 통일의 곡립이 세장하고 폭 및 두께가 작다는 것을 고려하여야 한다. 재배법에 있어서 통일의 등숙률이 낮은 원인이 주로 약세분얼이 많고 저온하에서는 출수가 지연되고 뿌리와 엽신의 기능이 저하되며 불임이 증가되는 것으로 판명되었고 그 외에 통일은 다비밀식적응성이 크므로 등숙향상과 수량 증대를 위해서는 적극적인 방법으로서 우선 견실하고 큰 묘를 가능한 한 조식하고 다비밀식상태로 재배하되 충분한 기비를 시용하고 묘수를 3본 내외로 심고 인산 및 규산등을 충분히 시용하여야 할 것이다.

• 한국유통학회지:유통연구
• /
• 제15권3호
• /
• pp.111-137
• /
• 2010

본 연구는 서비스 시장에서의 지각된 품질과 개인가치간의 인과적 관계 및 고객의 인지욕구에 따른 온 오프라인상의 조절효과에 대해 실증분석하였으며 이를 통해 개인가치에 대한 서비스 전략과 마케팅 관리의 중요성을 제시하고 있다. 서비스 시장에서 서비스 제공자와 구매자간의 장기적 거래관계의 중요성이 크게 부각됨에 따라 관계구축 및 강화에 매우 중요한 역할을 하는 개인가치에 관한 연구는 학계뿐만 아니라 실무적으로도 고객관계관리의 관점에서 시사하는 바가 크다고 할 수 있다. 실증분석을 위해 대형마트(할인점)와 인터넷 쇼핑몰을 이용하는 고객을 대상으로 설문을 통해 데이터를 수집하였으며 온 오프라인의 비교분석을 통한 차이검증을 위한 인과적 구성모델에 대해 구조방정식 모델분석을 통해 가설검증하였다. 구성모델에 대한 분석결과 물리적 환경, 상호작용 품질, 그리고 결과품질로 구성된 지각된 품질은 안정적 삶, 사회적 인식, 사회적 통합으로 구성된 서비스 개인가치에 통계적으로 매우 유의한 정(+)의 영향을 미치는 것으로 나타났으며 집단간 차이효과분석을 통해서도 온 오프라인에 따른 조정효과는 온라인에서보다는 오프라인에서 더 유의한 것으로 나타났다. 그리고 온라인상에서의 서비스에 대한 인지욕구가 높을 때보다는 오프라인상에서의 서비스에 대한 인지욕구가 높을 때 개인가치에 더 유의한 영향을 미치는 것으로 나타났다. 마지막으로 본 연구의 구성모델에 대한 적합도 역시 수용할만한 수준인 것으로 나타났다.

• 미술자료
• /
• 제96권
• /
• pp.54-88
• /
• 2019

《해악전도첩(海嶽全圖帖)》은 금강산과 해금강, 관동팔경을 그린 60점의 실경산수화와 51편의 기문(記文)으로 이루어진 화첩으로 규모와 화풍에 있어 보기 드문 작품이다. 그림의 특징은 화면을 가득 채운 구성과 남종화풍을 따르면서도 거칠고 파격적인 화법, 산석(山石)의 기하학적이고 입체적인 표현 등이다. 1973년의 특별전, '한국미술이천년(韓國美術二千年)'을 처음으로 화첩의 일부만 공개되었던 작품은 2019년 국립중앙박물관 특별전 '우리 강산을 그리다: 화가의 시선, 조선시대 실경산수화'에서 그 전모가 공개되었다. 《해악전도첩》이 김응환(金應煥)(1742~1789)의 작품으로 알려진 것은 화첩의 마지막 장에 쓰여진 관지(款識)와 현재 행방이 묘연한 <칠보대>에 찍힌 '복헌'이라는 도장 때문이었다. 그러나 김응환을 지시하는 관지와 도장은 모두 후대에 더해졌을 가능성이 크다. 본 연구는 화첩을 둘러싼 여러 요소를 고찰하여 제작자를 재검토하는 것을 목적으로 한다. 《해악전도첩》 제작 배경을 이해하기 위해 먼저 18세기 금강산 기행사경도의 전통과 봉명사경을 살펴보았다. 정선(鄭敾)(1676~1759)의 《신묘년풍악도첩(辛卯年楓嶽圖)帖》(1711)을 비롯하여 심사정(沈師正)(1707~1769), 김윤겸(金允謙)(1711~1775), 최북(崔北)(1712~1786 이후), 강세황(姜世晃)(1713~1791) 등은 조선 후기 최고의 여행지였던 금강산을 유람하고 기행사경도를 제작하였다. 화가들은 이전의 전통을 계승하여 내금강의 명승명소를 주로 그렸고, 자신들이 경험한 장소를 새롭게 시각화하였다. 이러한 기행사경도는 여행을 기념하며 동행자나 후원자를 위해 여러 장면을 담을 수 있는 화첩 형식으로 제작되었다. 개별적인 금강산 기행사 경도의 제작이 증가하는 가운데 1788년에 정조(正祖)(재위 1776~1800)가 도화서 화원인 김응환과 김홍도(金弘道)(1745~1806 이후)에게 영동9군과 금강산의 명승(名勝)을 그려오도록 명한 일은 공적 업무였다. 정조는 이들의 관계 및 지방관으로서의 경력, 서로 다른 화풍 등을 고려해 봉명사경의 화원으로 선발하였다. 김응환과 김홍도는 영조(英祖)(재위 1724~1776)조부터 도화서 화원으로 활동하며 선후배이자 동료로서 친밀한 관계를 유지했다. 나아가 이들은 영남 지역의 찰방(察訪)으로서 지방관의 업무를 수행한 경험이 있었다. 두 화원의 화풍은 서로 달라 김홍도는 부드럽고도 섬세하게 필선을 운용한 반면, 김응환은 굳세면서도 울창한 풍치를 잘 표현했다. 두 명의 화원은 각자의 개성으로 봉명사경 기간 동안 100여 폭의 초본을 그렸고, 이를 선별하여 60~70여 폭의 화첩 혹은 두루마리를 완성하였다. 이들의 그림은 18세기 전중반에 내금강과 관동팔경 위주로 제작된 금강산 기행사경도의 전통을 더욱 풍부하게 했고 영동과 외금강의 명승명소를 새롭게 발견하며 소재를 확장시켰다. 현재 《해악전도첩》은 원(元), 형(亨), 이(利), 정(貞) 4책으로 이루어졌는데, 원(元), 형(亨)책은 내금강의 그림 29점이며 이(利)책은 외금강의 장면 17점, 정(貞)책은 해금강과 관동팔경 14점으로 구성되었다. 비단 위에 그려진 각 그림은 기하학적으로 산석을 표현했으며, 연백으로 금강산의 암봉을 흰색 혹은 회청색으로 표현했다. 《해악전도첩》의 구도와 화법은 정선, 강세황, 심사정, 정충엽(鄭忠燁)(1725~1800 이후), 김응환, 김홍도의 화법과 비교할 수 있어 18세기 후반의 시대 양식을 갖는다. 특히 화첩의 일부 그림은 김홍도의 《해동명산도첩(海東名山圖帖)》(1788)과 구성 및 회화적 모티프가 매우 유사하여 두 화첩간의 연관성을 보여준다. 반면에 <영랑호>, <해산정>, <월송정> 등은 김홍도의 그림과는 구별된다. 이를 통해 화가가 김홍도와 영향을 주고받으면서도 자신만의 개성적인 화첩을 제작했음을 추측해 볼 수 있다. 《해악전도첩》에는 다른 화첩에는 등장하지 않는 <자운담>, <백운대>, <안문점망비로봉>, <백정봉> 등이 포함되어 있으며 각 장면마다 경물의 특징을 구체적이고 참신하게 묘사하였다. 특히, 화가는 산석을 기하학적으로 표현하고 선과 면을 도드라지게 하여 입체감을 강조하였다. 그는 남종화풍을 바탕으로 자신만의 화법을 확립했고 이를 자유자재로 운용하면서 화면에 동적인 리듬감을 부여했다. 이처럼 60점의 그림은 거칠고 파격적으로 보이지만 나름의 질서 안에서 일관성을 견지하고 있다. 본고는 화법과 봉명사경의 정황을 종합해 《해악전도첩》의 제작자를 김응환으로 추론하였다. 나아가 김하종(金夏鍾)(1793~1878 이후)의 《풍악권(楓嶽卷)》(1865년 이후)과의 친연성은 《해악전도첩》의 화가를 김응환으로 추정한 또 하나의 이유였다. 《해악전도첩》은 김홍도의 《해산첩》과는 달리 후대에 미친 영향력이 미비한데 김하종의 《풍악권》만이 《해악전도첩》의 소재와 화법을 따르고 있다. 김하종은 《풍악권》에서 50년 전, 춘천부사 이광문(李光文)(1778~1838)을 위해 제작한 《해산도첩》(1816)과는 전혀 다른 화법을 구사했다. 그는 김응환의 《해악전도첩》과 유사한 구성과 회화적 요소, 화보식 인물표현을 따르면서 사의적인 분위기를 강조하였다. 개성김씨의 일원이자 김응환의 종손인 김하종은 가문에 전해지는 《해악전도첩》류의 그림을 감상했고 이를 새롭게 번안했다고 추측된다. 화첩에 포함된 51편의 기문은 그림 다음 장에서 그려진 장소를 설명하고 있어 각 그림을 이해하고 감상하는 데 도움을 준다. 기문은 그림과 밀접한 관계를 가지며 앞의 장소로부터의 이동 정보, 이름의 유래, 지형적 특징, 관련 정보 등이 서술되었다. 이와 같은 백과사전식 혹은 지리지와 같은 기문은 19세기 전반에 나타나기 시작했으며, 금강산 화첩류에 더해졌다. 《해악전도첩》의 백화암 기문에는 1845년의 암자에 대한 중건 내용이 기록되어, 기문의 연대를 추정하는 중요한 근거가 되었다. 김하종에게 《풍악권》을 주문한 이유원(李裕元)(1814~1888)도 각 그림에 글을 붙였는데 이 글들은 김응환의 화첩에 포함된 기문 51편과 내용 및 서술방식이 흡사하다. 이유원의 기문은 《해악전도첩》의 기문이나 그 초고(원본)와 관련성이 높지만 두 화첩의 기문 필사의 선후관계를 판정하는 데에는 좀더 면밀한 검토가 필요하다. 《해악전도첩》은 김홍도의 봉명사경 초본 및 김홍도의 영향으로 제작된 19세기의 금강산 화첩과는 구별된다. 이 화첩은 화원 김응환의 회화세계를 이해할 수 있는 지평을 넓히고 18세기 후반 실경산수화의 또 다른 층위를 보여주고 있어 중요한 의미를 갖는다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.