• Steel and Composite Structures
• /
• 제18권5호
• /
• pp.1177-1195
• /
• 2015

Six specimens are tested to investigate the cyclic behavior of beam-to-column abnormal joints in steel moment-resisting frames, which are designed according to the principle of strong-member and weak-panel zone. Key parameters include the axial compression ratio of column and the section depth ratio of beams. Experimental results indicate that four types of failure patterns occurred during the loading process. The $P-{\Delta}$ hysteretic loops are stable and plentiful, but have different changing tendency at the positive and negative direction in the later of loading process due to mechanical behaviors of specimens. The ultimate strength tends to increase with the decrease of the section depth ratio of beams, but it is not apparent relationship to the axial compression ratio of column, which is less than 0.5. The top panel zone has good deformation capacity and the shear rotation can reach to 0.04 rad. The top panel zone and the bottom panel zone don't work as a whole. Based on the experimental results, the equation for shear strength of the abnormal joint panel zone is established by considering the restriction of the bottom panel zone to the top panel zone, which is suitable for the abnormal joint of H-shaped or box column and beams with different depths.

• Steel and Composite Structures
• /
• 제22권1호
• /
• pp.141-159
• /
• 2016

Commonly in steel frames, steel beam and concrete slab are connected together by shear keys to work as a unit member which is called composite beam. When a composite beam is subjected to positive bending, flexural strength and stiffness of the beam can be increased due to "composite action". At the same time despite these advantages, composite action increases the strain at the beam bottom flange and it might affect beam plastic rotation capacity. This paper presents results of study on the rotation capacity of composite beam connected to Rectangular Hollow Section (RHS) column in the steel moment resisting frame buildings. Due to out-of-plane deformation of column flange, moment transfer efficiency of web connection is reduced and this results in reduction of beam plastic rotation capacity. In order to investigate the effects of width-to-thickness ratio (B/t) of RHS column on the rotation capacity of composite beam, cyclic loading tests were conducted on three full scale beam-to-column subassemblies. Detailed study on the different steel beam damages and concrete slab damages are presented. Experimental data showed the importance of this parameter of RHS column on the seismic behavior of composite beams. It is found that occurrence of severe concrete bearing crush at the face of RHS column of specimen with smaller width-to-thickness ratio resulted in considerable reduction on the rate of strain increase in the bottom flange. This behavior resulted in considerable improvement of rotation capacity of this specimen compared with composite and even bare steel beam connected to the RHS column with larger width-to-thickness ratio.

• 한국조명전기설비학회지:조명전기설비
• /
• 제7권2호
• /
• pp.31-35
• /
• 1993

본 논문은 t은과 10[torr]의 희유기체의 혼합기체 중에서 심하게 변조된 저압기체방전의 양광주의 반경방향 압자분포를 이론적으로 연구하였다. 전류는 깊이 50[%[로 정현파로 변조되었다. 계산결과 여기 원자의 반경방향 분포는 0차 Bessel 함수 $J_0(2.4r/R)$와 다르고 분포의 반전이 나타나는 주파수 대역도 있었다. 연립미분방정식을 풀기 위하여 FDM과 2계 Runge-Kutta method의 혼합법을 사용하였다.

• 조명전기설비학회논문지
• /
• 제14권3호
• /
• pp.1-5
• /
• 2000

본 논문은 양광주의 전계, 관벅온도, 관벽휘도를 측정하여 관의 형태에 따른 형광램프의 광학적, 전기적 특성 변화를 측정한 것이다. 각 램프의 전계 계산 결과, 그 지수들은 양광주부분에서 거의 변화되지 않았지만 음극 강하의 길이는 크게 변화하였으며, 관벽온도와 휘도는 음극부분에서 크게 변화되었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1374-1377
• /
• 2006

The voltage distribution of an external electrode fluorescent lamp(EEFL) having a gas pressure of 50 torr and a gas composition of Ne:Ar with a ratio of 90:10 has been estimated by varying the distance between the two external electrodes and monitoring the change of the lamp voltage. The estimated voltage gradient, which represents the electric field in the positive column of the EEFL, was very sensitive to the electrode area of EEFL and was in the range of $13\;{\sim}\;27\;V/cm$ at the electrode length of $15\;{\sim}\;31\;mm$. Changing the lamp current in the range $3\;{\sim}\;5\;mA$ did not make noticeable difference in the electric field of the positive column. Theses results may serve as basic data for the optimization of electric and optic characteristics of EEFL.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.766-768
• /
• 1988

Electron mobility which is a basic parameter to represent gas state, is calcurated using equation assumed Lorentz gas. This equation is applied to 30mm 20W fluorescent lamp. In order to obtain electric field strength of positive column, lamp and cathode fall voltage wave form is measuread using indirect voltage measuring methode. To obtain electron density, used the calculation of S.C Peek and D.E Spencer. The result which is applaied 38mm fluorescent lamp at 400mA, $20^{\circ}C$ is displayed.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.101-104
• /
• 2004

Composite beams are generally known to possess higher flexural stiffness and strength under the positive bending moments than the normal steel beams. However the these beams also exhibit large differences in flexural stiffness and strength when both positive and negative bending moments are applied. As observed during the 1995 Kobe Earthquake, these beams tend to be fractured on the bottom flanges under repeated cyclic loadings. The objective of this study is to develop and evaluate the composite beam detail, which is able to effectively resist the seismic loadings. The proposed system is composed of the slit on concrete slab around column. A limited experimental program was designed and conducted to investigate the hysteretic behavior of the proposed composite beam system. From the experimental data obtained from the testing of three specimens, the proposed composite beam detail is found to possess large beam rotation than normal steel beams.

• 약학회지
• /
• 제54권4호
• /
• pp.316-321
• /
• 2010

Adefovir dipivoxil which was originally developed by Gilead Sciences has been used as treatments of HIV and HBV, especially a therapeutics for HBeAg positive and negative chronic patients. We developed highly efficient purification method using reverse phase column chromatography for mass production and a stable amorphous Adefovir dipivoxil using solid dispersion method. Reverse phase column chromatography led to highly pure product, more than 99.7% by HPLC and can be used for mass production compared with normal column chromatography. Solid dispersion method containing watersoluble polymer and Isomalt showed improved stability of amorphous Adefovir dipivoxil against heat and moisture.

• 한국어병학회지
• /
• 제5권2호
• /
• pp.87-92
• /
• 1992

넙치의 혈청, 체표점액 및 각 조직으로부터 lysozyme의 분리와 정제를 Chitin-coated Cellulose column 크로마토그라피를 사용하여 분리하였다. 15% SDS-PAGE의 전기 영동상을 조사한 결과 넙치의 신장, 유문수, 아가미 점액 및 혈청으로부터 분리된 lysozyme은 동일한 분자량(약 14000)을 나타내었다. 넙치의 방어기작으로서 lysozyme의 역할을 밝히기 위해 그람양성 세균 2주, 그람음성 세균 5주에 대하여 넙치 신장 유래 lysozyme의 정균작용을 조사한 결과 그람 양성 2주 그람 음성 세균 2주에 대하여 정균작용을 나타내었다. 이것은 넙치 유래의 lysozyme은 그람 양성 세균뿐만 아니라 그람 음성 세균에 대해서는 생체 방어 작용을 수행하는 것으로 고려된다.

• Steel and Composite Structures
• /
• 제29권4호
• /
• pp.451-464
• /
• 2018

This paper presents some quasi-static tests for 4 mixed columns composed of CFST column and RC column. The seismic performance and failure mode were studied under low-cyclic revised loading. The failure mode was observed under different axial compression ratios. The hysteretic curve and skeleton curve were obtained. The effects of axial compression ratio on yield mechanism, displacement ductility, energy dissipation, stiffness and strength attenuation were analyzed. The results indicate that the failure behavior of CFST-RC mixed column with archaized style is mainly caused by bending failure and accompanied by some shear failure. The axial compression ratio performs a control function on the yielding order of the upper and lower columns. The yielding mechanism has a great influence on the ductility and energy dissipation capacity of specimens. Based on the experiment, finite element analysis was made to further research the seismic performance by ABAQUS software. The variable parameters were stiffness ratio of upper and lower columns, axial compression ratio, yielding strength of steel tube, concrete strength and rebar ratio. The simulation results show that with the increase of stiffness ratio of the upper and lower columns, the bearing capacity and ductility of specimens can correspondingly increase. As the axial compression ratio increases, the ductility of the specimen decreases gradually. The other three parameters both have positive effect on the bearing capacity but have negative effect on the ductility. The results can provide reference for the design and engineering application of mixed column consisted of CFST-RC in Chinese archaized buildings.