Steel and Composite Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Seismic performance of mixed column composed of square CFST column and circular RC column in Chinese archaized buildings

  • Xue, Jianyang (College of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Zhou, Chaofeng (College of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Lin, Jianpeng (College of Civil Engineering, Xi'an University of Architecture and Technology)
  • Received : 2018.02.11
  • Accepted : 2018.10.05
  • Published : 2018.11.25
⟨ Previous Next ⟩

Abstract

This paper presents some quasi-static tests for 4 mixed columns composed of CFST column and RC column. The seismic performance and failure mode were studied under low-cyclic revised loading. The failure mode was observed under different axial compression ratios. The hysteretic curve and skeleton curve were obtained. The effects of axial compression ratio on yield mechanism, displacement ductility, energy dissipation, stiffness and strength attenuation were analyzed. The results indicate that the failure behavior of CFST-RC mixed column with archaized style is mainly caused by bending failure and accompanied by some shear failure. The axial compression ratio performs a control function on the yielding order of the upper and lower columns. The yielding mechanism has a great influence on the ductility and energy dissipation capacity of specimens. Based on the experiment, finite element analysis was made to further research the seismic performance by ABAQUS software. The variable parameters were stiffness ratio of upper and lower columns, axial compression ratio, yielding strength of steel tube, concrete strength and rebar ratio. The simulation results show that with the increase of stiffness ratio of the upper and lower columns, the bearing capacity and ductility of specimens can correspondingly increase. As the axial compression ratio increases, the ductility of the specimen decreases gradually. The other three parameters both have positive effect on the bearing capacity but have negative effect on the ductility. The results can provide reference for the design and engineering application of mixed column consisted of CFST-RC in Chinese archaized buildings.

Keywords

Acknowledgement

Supported by : National Natural Science Foundation of China

References

  1. Chacon, R., Mirambell, E. and Real, E. (2013), "Strength and ductility of concrete-filled tubular piers of integral bridges", Eng. Struct., 46(1), 234-246.
  2. Chitawadagi, M.V., Narasimhan, M.C. and Kulkarni, S.M. (2012), "Axial strength of circular concrete-filled steel tube columns -doe approach", J. Constr. Steel Res., 66(10), 1248-1260. https://doi.org/10.1016/j.jcsr.2010.04.006
  3. Darvishi, E., Namdar, A., Feng, X. and Ge, Q. (2016), "Seismic resistance of timber structure-a state of the art design", Procedia Struct. Integr., 2, 2750-2756. https://doi.org/10.1016/j.prostr.2016.06.343
  4. Eckelman, C.A. and Haviarova, E. (2015), "Withdrawal and compression force capacity of pinned end-to-end round mortiseand-tenon wooden joints", Wood Sci. Technol., 47(3), 217-224.
  5. Ekmekyapar, T. and Al-Eliwi, B.J.M. (2016), "Experimental behaviour of circular concrete filled steel tube columns and design specifications", Thin Wall Struct., 105(8), 220-230. https://doi.org/10.1016/j.tws.2016.04.004
  6. Ghannam, S., Jawad, Y.A. and Hunaiti, Y. (2004), "Failure of lightweight aggregate concrete-filled steel tubular columns", Steel Compos. Struct., Int. J., 4(1), 1-8. https://doi.org/10.12989/scs.2004.4.1.001
  7. Gong, X. (2015), "Research on seismic performance of a reinforced concrete antique building", J. North China Univ. Techno., 27(3), 43-50.
  8. Hajjar, J.F. (2015), "Concrete-filled steel tube columns under earthquake loads", Progr. Struct. Eng. Mater., 2(1), 72-81. https://doi.org/10.1002/(SICI)1528-2716(200001/03)2:1<72::AID-PSE9>3.0.CO;2-E
  9. Han, L.H. and An, Y.F. (2014), "Performance of concrete-encased CFST stub columns under axial compression", J. Constr. Steel Res., 93(1), 62-76.
  10. Liu, W. (2005), "Research on mechanism of concrete-filled steel tubes subjected to local compression", Ph.D. Dissertation; Fuzhou University, Fuzhou, China.
  11. Ouyang, Y. and Kwan, A.K.H. (2018), "Finite element analysis of square concrete-filled steel tube (CFST) columns under axial compressive load", Eng. Struct, 156(2), 443-459. https://doi.org/10.1016/j.engstruct.2017.11.055
  12. Patel, V.I., Uy, B., Prajwal, K.A. and Aslani, F. (2016), "Confined concrete model of circular, elliptical and octagonal CFST short columns", Steel Compos. Struct., Int. J., 22(3), 497-520. https://doi.org/10.12989/scs.2016.22.3.497
  13. Portoles, J.M., Romero, M.L., Bonet, J.L. and Filippou, F.C. (2011), "Experimental study of high strength concrete-filled circular tubular columns under eccentric loading", J. Constr. Steel Res., 67(4), 623-633. https://doi.org/10.1016/j.jcsr.2010.11.017
  14. Prabhu, G.G., Sundarraja, M.C. and Yun, Y.K. (2015), "Compressive behavior of circular CFST columns externally reinforced using CFRP composites", Thin Wall Struct., 87(2), 139-148.
  15. Shen, J.M., Wang, C.Z. and Jiang, J.Q. (1993), Finite Element Analysis of Reinforced Concrete and Limit Analysis of Plate and Shell, Tsinghua University Press, Beijing, China.
  16. Skalomenos, K.A., Hatzigeorgiou, G.D. and Beskos, D.E. (2015), "Modeling level selection for seismic analysis of concrete-filled steel tube/moment-resisting frames by using fragility curves", Earthq.Eng. Struct. D., 44(2), 199-220. https://doi.org/10.1002/eqe.2465
  17. Sundarraja, M.C. and Prabhu, G.G. (2013), "Flexural behaviour of CFST members strengthened using CFRP composites", Steel Compos. Struct., Int. J., 15(6), 623-643. https://doi.org/10.12989/scs.2013.15.6.623
  18. Suzuki, H., Nishihara, H., Matsuzaki, Y. and Minami, K. (2000), "Structural performance of mixed member composed of steel reinforced concrete and reinforced concrete", Proceedings of the 12th World Conf. on Earthquake Engineering, Mexico, October.
  19. Wang, L. (2012), "Comparative study on structural behavior between ancient structure and antique building of a Qing-style Hall", Master Dissertation; Xi'an University of Architecture & Technology, Xi'an, China.
  20. Wang, J.C. and Chen, Y.K. (2006), Application of ABAQUS in Civil Engineering, Zhejiang University Press, Hangzhou, China.
  21. Wu, K., Xue, J.Y. and Zhao, H.T. (2016), "Experimental research on seismic behavior of SRC-RC transfer columns", Steel Compos. Struct., Int. J., 21(1), 157-175.
  22. Xue, J.Y., Wu, Z.J. and Sui, Y. (2015), "Experimental study on seismic performance of steel double-beams column exterior joints in antique style building", J. Build. Struct., 36(3), 80-89.
  23. Yadav, R., Chen, B., Yuan, H. and Lian, Z. (2016), "Numerical study on the seismic behavior of CFST columns", Proceedings of the 11th Pacific Structural Steel Conference 2016, Shanghai, October.
  24. Zeghiche, J. and Chaoui, K. (2005), "An experimental behavior of concrete-filled steel tubular columns", J. Constr. Steel Res., 61(1), 53-66. https://doi.org/10.1016/j.jcsr.2004.06.006
  25. Zhao, Y. and Shao, Y.J. (2010), "Experimental study on seismic behavior of SRC-RC transfer columns with different constructional measures", World Earthq. Eng., 26(2), 119-124.

Cited by

  1. Shear behavior of concrete-encased square concrete-filled steel tube members: Experiments and strength prediction vol.38, pp.4, 2018, https://doi.org/10.12989/scs.2021.38.4.431
  2. Seismic behavior of cross-shaped concrete-filled steel tubular columns vol.40, pp.3, 2021, https://doi.org/10.12989/scs.2021.40.3.405