• International Journal of Contents
• /
• v.9 no.1
• /
• pp.18-25
• /
• 2013

Recently, augmented reality has been proved immensely useful on a day to day basis when tied with location-based technology. In this paper, we present a new method for displaying augmented reality contents on mobile devices. We add 3D models on the view of the camera and use location-based services, motion sensors to calculate the transformation of models. Instead of remaining at a fixed position on camera view while moving around a 3D model, the model rotates on display in the opposite direction that the user is walking. We also design client as a ubiquitous client to reduce constraints on disk space and memory capacity on mobile devices. Implementation results show effective use in creating GPS-based 3D view augmented reality contents for Smart Mobile Devices.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.440-443
• /
• 2004

As a main management unit of MSC, PMU controls the MSC payload operation by issuing commands to other subunit and PMU internal modules. One of these main control functions is to drive the APS(Antenna Pointing System) when APS motion is required. For this purpose, SBC(Single Board Computer) for calculating motor commands and APDE for driving APM(Antenna Pointing Mechanism) by PWM signal operate inside PUM. In this paper, details on APDE design shall be described such as electronic board architecture, primary and redundant design concept, Cross-Strap, FPGA contents and latch-up immune concept, etc., which shall show good practices of electronic board design for space program.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2007.06a
• /
• pp.11-14
• /
• 2007

An additive servo-system is developed to improve straightness of linear motor stages. For linear motor stages used in the field of high-precision linear motion process, high straightness accuracy is necessary as well as positioning accuracy in the longitudinal axis. In such cases, machining and assembling cost increases to improve the straightness accuracy. An electro-magnetic actuator which is relatively cost effective than any other conventional servo-systems is suggested to compensate the fixed straightness error. To overcome the compensation error due to modeling error and friction disturbance, a sliding mode control is addressed. The effectiveness of the suggested mechanism and the control are illustrated along with some experimental results.

• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.95-99
• /
• 1994

Robot engineering is developed mainly in the field of intelligibility such as a manipulation. Considering the popularization of robots in the future, however, a robot should be studied from a viewpoint of saving energy because a robot is a kind of machine with a energy conversion. This paper deals with minimizing an energy consumption of a manipulator which is driven in a point-to-point control method. When a manipulator carries a heavy payload toward gravitation or the links are de-accelerated for positioning, the motors at joints generate electric energy. Since this energy can be regenerated to the source by using a chopper, the energy consumption of a manipulator is only heat loss by an electric and a frictional resistance of the motors. The minimization of the sum of these losses is reduced Lo a two-points boundary-value problem of an non-linear differential equation. The solutions are obtained by the generalized Newton-Raphson method in this paper. The energy consumption due to the optimum angular velocity patterns of two joints of a two-links manipulator is compared with conventional velocity patterns such as quadratic and trapezoid.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.213-216
• /
• 1996

This paper studies a class of in-parallel manipulators with special geometry where the forward displacement analysis problem can be solved easier than the fully parallel manipulators. Three horizontal links of this mechanism provide 3DOFs(Degrees of Freedom), which are one degree of orientational freedom and two degrees of translatory freedom. Three vertical links of this mechanism provide 3DOFs, which are two degrees of orientational freedom and one degree of translatory freedom. The main advantages of this manipulator, compared with the Stewart platform type, are the capability to produce pure rotation and to predict the motion of the moving platform easily. Since this manipulator has simple kinematic characteristics compared with the Stewart platform, controlling in real-time is possible due to less computational burden. The purpose of this investigation is to develope an analytical method and systematic method to analyze the basic kinematics of the manipulator. The basic kinematic equations of the manipulator are derived and simulation is carried out to show the performance of the mechanism.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.8
• /
• pp.883-888
• /
• 1999

To obtain high positioning auccuracy for a long, flex bleman Ipulator, residual vibration must be removed from the tip motion. But it is difficult to control the vibration of low frequency. There are open-loop and closed loop methods in the elimination of the residual vibration. We inroduce input shaping technique has been used as a simple open-loop method of controlling the residual vibration of a flexible manipulator. Design of input shaper in the continuous time domain is complicated. This paper presents a new technique that designs input shaper in the z-domain and analyzes input shaping method in the z-domain. This technique is simple and easy to design input shaper.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.848-851
• /
• 2002

Recently, there are lots of concerning on the integration of robot and virtual reality with the trends of the research of intelligent robot and mined reality. In this paper, a 3D GUI system is proposed based on Internet for remote controlling and monitoring of agent robot working for itself. The proposed system is consists of a manager ordering a new position and displaying the motion of robot, an agent robot moving to the destination according to the indication, a positioning module detecting the current position of robot, and a geographical information module. A user can order the robot agent move to a new position in a virtual space and watch the real images captured from the real sites of the robot. Then, the agent robot moves to the position automatically with avoiding collision by using range finding and a path detection algorithm. We demonstrate the proposed 3D GUI system is supporting a more convenient remote control means far the robots.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.785-790
• /
• 2001

Linear motors can drive a linear motion without intermediate gears, screws or crank shafts. Linear motors can successfully replace ball lead screw in machine tools, because they have a high velocity, acceleration and good positioning accuracy. On the other hand, linear motors emit large amounts of heat and have low efficiency. In this paper, heat sources of a synchronous linear motor with high velocity and force are measured and analyzed. To improve the thermal stiffness of the linear motor, an insulation layer with low thermal conductivity is inserted between cooler and machine table. Some effects of the insulation layer are presented.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.5
• /
• pp.163-169
• /
• 2013

The objective of this study is to replace labor intensive forging processes by an automated system. For achieving it, an exclusive mechanism that consists of a positioner, an arm, and a hanger is configured to handle hot forging objects. Also, a structural analysis is applied to the horizontal motion unit, which is the most highly loaded, in order to verify its validity. In addition, its possibility is also verified through identifying the performance of the proposed system before applying it to sites. As a result, the major characteristic items, such as positioning accuracy, material diameter, object traveling weight, product failure rate, and forging process rate, in this system are perfectly verified for applying it to manufacturing sites.

• Proceedings of the Korea Contents Association Conference
• /
• 2010.05a
• /
• pp.46-48
• /
• 2010

최근 스마트폰 동향은 기존에 연구되고 개발되어진 기술들이 다양한 현실 환경에 응용 가능하도록 새로운 기술들과 접목되어져 많은 어플리케이션에 사용되어지고 있다. 본 논문에서는 개발자와 사용자들에게 각광받고 있는 기술들로 GPS(Global Positioning System), 증강현실(Augmented Reality), 동작인식(Motion Detection)등의 기술사용을 접목한 게임사례들의 기술적 요소에 접근하여 자체기술을 활용한 게임디자인을 제안하고자 한다. 기존 휴대폰이라는 매체의 제한된 속성에서 한 단계 발전한 스마트폰 어플리케이션 기반 게임의 분석은 게임의 새로운 장르 발전과 사용자의 통합적 감각 경험에 의한 가상공간에서의 만족도를 증진시킬 수 있으리라 기대하며 이러한 기술을 토대로 차후 게임제작에 적용되었을 때 더 나은 효과를 발휘하리라 사료된다.