• 제어로봇시스템학회논문지
• /
• 제21권1호
• /
• pp.70-75
• /
• 2015

With the development of communication technologies and smartphone, requirements of positioning accuracy for LBS (Location Based Service) are becoming increasingly important. LBS is a service which offers the information or entertainment based on a location to users. Therefore, positioning is very important for LBS. Among many positioning methods, IEEE 802.11 WLAN positioning measures the distance using the RSSI (Received Signal Strength Indicator) attenuation log model. Thus in order to enhance positioning, we modify the IEEE 802.11 RSSI attenuation log model by adaptive weighting method. In this paper, we propose improved IEEE 802.11 RSSI attenuation log model for enhanced indoor positioning.

• 제어로봇시스템학회논문지
• /
• 제12권10호
• /
• pp.975-981
• /
• 2006

This paper shows a feasibility analysis results on RFID for car positioning system. Usually, a car navigation is mainly based on GPS combined with map-matching. However, in the case of poor visibility of satellites, GPS can not supply accurate position information continuously. In recent years, RFID has been considered to be one of key technologies in positioning and localization area. But its application and research results in the area of vehicular positioning are not popular. RFID system consists of tag, reader, antenna and software such as drivers and middleware. The main function of RFID system in a vehicular positioning is to retrieve ID recorded position information from tags which set on the center of road. We propose a positioning method for vehicles using RFID and we present some indoor and outdoor experiment results to show that the proposed method is available in vehicle operational environments.

• International Journal of Control, Automation, and Systems
• /
• 제6권4호
• /
• pp.544-550
• /
• 2008

In this paper, an efficient positioning algorithm is proposed for a local positioning system using ultrasound and RF in WSN. The proposed positioning algorithm is the modified Savarese method where measurement noise characteristics are included as a weighting. Furthermore the ill-conditioned and the singularity problem occurred when all beacons are installed at the same height are removed. And the method is applicable to 2D positioning with 2 beacons only. The experiments with implemented system show the accurate seamless positioning less than 2cm error both static and dynamic experiments while the original Savarese method can not provide positions.

• Journal of Positioning, Navigation, and Timing
• /
• 제10권2호
• /
• pp.121-130
• /
• 2021

In this paper, we propose a method to improve the positioning accuracy of TOA based indoor positioning system in NLOS environments. TOA based indoor positioning systems have been studied mostly considering LOS environments. However, it is almost impossible to maintain the LOS environments due to obstacles such as people, furniture, walls, and so on. The proposed method in this study compensates the range error caused by the NLOS environments. We confirmed that positioning accuracy of a proposed method is improved than conventional algorithms through simulation and field test.

• 한국지능시스템학회논문지
• /
• 제22권3호
• /
• pp.367-372
• /
• 2012

본 논문은 아날로그형 자기위치 장치(magnetic positioning system)의 개발과 퍼지 추론 시스템(FIS: fuzzy inference system)을 통한 정밀도 향상에 관한 것이다. 자기위치 장치는 무인운반차(AGV: automatic guided vehicle)의 자기-자이로 유도장치(magnet-gyro guidance system)에 사용되는 장치로, 바닥에 매설된 자석의 위치를 계측하는 장치이다. 기존의 판매되고 있는 자기-자이로 유도 장치는 외국에서 독점 판매되고 있어, 국내에서는 가격이 매우 비싸다. 또한, 자기위치 장치에 디지털 타입의 단극성 홀센서를 이용하기 때문에 위치측정 정밀도가 낮다. 이에, 본 논문에서는 자기위치 장치를 직접 개발하였고 퍼지 추론 시스템을 통해 자기위치 장치의 정밀도 향상시켰다. 실험은 직접 개발한 아날로그형 자기위치 장치를 이용하였으며, 기존의 위치측정 방법과 제안된 방법의 성능을 비교하였다. 실험 결과, 제안된 방법이 자기위치 장치의 정밀도를 향상시킴을 확인하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.975-980
• /
• 2004

Positioning system is widely used for many practical applications. This system requires a good controller to achieve high accuracy and fast response with simple and self-adjustable design. In order to satisfy the above requirements, a new practical controller for positioning systems, namely nominal characteristic trajectory following (NCTF) controller with PI compensator, has been proposed. However, the effect of actuator saturation can not be completely compensated for integrator windup when the object parameters vary. This paper presents a method to improve the NCTF controller by overcoming the problem of integrator windup by adopting a fuzzy system. The improvement of the NCTF controller is evaluated through simulation using a rotary positioning system. The simulation result has demonstrated the effectiveness of the compensated NCTF in overcoming the problem of integrator windup.

• 산업기술연구
• /
• 제28권A호
• /
• pp.97-104
• /
• 2008

Recently, interests on positioning system for location-based services have been significantly increased. Many indoor environment systems using fingerprint scheme have been designed to take more accuracy of positioning, but they are inefficient in adapting to change of environments. In this paper, we focus on a client-based positioning system over WLAN for decreasing installation cost and adapting to change of environments. In the proposed system, APs with stable RSSI are selected as base APs independently for each reference point. Experimental results show that proposed system expands service area approximately 20% much than traditional systems using K-NN algorithm and needs only 20% modification process to fingerprint data compare with traditional systems whenever environment conditions are changed.

• 한국컴퓨터정보학회논문지
• /
• 제22권1호
• /
• pp.33-40
• /
• 2017

In this paper, we introduce commercial indoor navigation systems being deployed and serviced in many fields of industry focusing on their indoor positioning technologies. Indoor positioning technology is a technology that locates people or targets in the interior of a building. To do that, it utilizes radio waves such as WiFi, and bluetooth, magnetic fields, or other sensory information from smart phones. We present indoor navigation systems categorizing them into their indoor positioning technologies. We define important performance issues for indoor positioning technologies and analyze them according to the performance issues. We believe that this paper provide wise view and necessary information for recent indoor navigation systems.

• 제어로봇시스템학회논문지
• /
• 제20권7호
• /
• pp.774-781
• /
• 2014

This paper presents a fingerprint database construction method for WLAN RSSI (Received Signal Strength Indicator)-based indoor positioning. When RSSI is used for indoor positioning, the fingerprint method can achieve more accurate positioning than trilateration and centroid methods. However, a FD (Fingerprint Database) must be constructed before positioning. This step is a very laborious process. To reduce the drawbacks of the fingerprint method, a radio propagation model-based FD construction method is presented. In this method, an FD can be constructed by a simulator. Experimental results show that the constructed FD-based positioning has a 3.17m (CEP) error. In this paper, a spatial correlation method is presented to estimate the NLOS(Non-Line of Sight) error included in the FD constructed by a simulator. As a result, the NLOS error of the FD is reduced and the performance of the error compensated FD-based positioning is improved. The experimental results show that the enhanced FD-based positioning has a 2.58m (CEP) error that is a reasonable performance for indoor LBS (Location Based Service).

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1239-1244
• /
• 2004

Precise positioning is an important problem facing motion control systems which usually use electric motor. A motor possesses a nonlinear property which degrades the positioning accuracy. Therefore, a compensator which linearizes the relationship between the angular velocity and input signal of the motor is required to enable precise positioning. In this paper, the design of a Model Reference Adaptive Control System (MRACS) for realizing the precise positioning for a system using a motor including the nonlinear property is described. The designed MRACS is applied to the attitude control problem on a satellite using a DC servomotor to drive its reaction wheel. Experimental results demonstrate the validity of a proposed control method for a positioning control system with an electric motor.