• Nuclear Engineering and Technology
• /
• 제56권6호
• /
• pp.2220-2238
• /
• 2024

As a typical active equipment, pump machinery is widely used in nuclear power plants. Although the mechanism of pump machinery in nuclear power plants is similar to that of conventional pumps, the safety and reliability requirements of nuclear pumps are higher in complex operating environments. Once there is significant performance degradation or failure, it may cause huge security risks and economic losses. There are many pumps mechanical parameters, and it is very important to explore the correlation between multi-dimensional variables and condition. Therefore, a condition monitoring model based on Deep Denoising Autoencoder (DDAE) is constructed in this paper. This model not only ensures low false positive rate, but also realizes early abnormal monitoring and location. In order to alleviate the influence of parameter time-varying effect on the model in long-term monitoring, this paper combined equidistant sampling strategy and DDAE model to enhance the monitoring efficiency. By using the simulation data of reactor coolant pump and the actual centrifugal pump data, the monitoring and positioning capabilities of the proposed scheme under normal and abnormal conditions were verified. This paper has important reference significance for improving the intelligent operation and maintenance efficiency of nuclear power plants.

• 한국화재소방학회논문지
• /
• 제27권5호
• /
• pp.75-79
• /
• 2013

임신부의 경우 심폐소생술동안 좌측 기울림을 적용하도록 권장하고 있다. 하지만, 이 좌측으로 기울리면 임신부의 자궁 뿐만이 아니라 좌심실도 좌측으로 편위되어 심폐소생술의 심장펌프기능이 떨어질 가능성이 있다. 이에 좌측 기울림이 심폐소생술동안 흉골 운동 방향을 대변하는 전후축과 좌심실의 공간적 관계에 미치는 영향을 알아보고자 하였다. 컴퓨터 단층촬영을 이용한 가상내시경검사를 받은 90명의 환자를 대상으로 의무기록과 컴퓨터단층촬영결과를 후향적으로 조사하였다. 가상내시경은 앙와위와 좌측 기울림 위치 모두에서 실시되었다. 좌심실 단면적이 가장 넓은 축면에서 전후축과 좌심실축사이의 각도($Angle_{AP-LV}$), 전후축과 좌심실 중앙사이 최단거리($D_{AP-MidLV}$), 및 전후축과 좌심실첨부사이 최단거리($D_{AP-Apex}$)를 측정하였다. 대상환자 중 87명(96.7%)에서는 앙와위에서 좌심실이 전후축의 좌측에 위치하였다. 좌측으로 기울인 영상에서의 기울림 각도는 $43.4{\pm}11.0^{\circ}$였다. $D_{AP-MidLV}$와 $D_{AP-Apex}$는 좌측 기울린 위치에서 의미있게 길었지만 (p<0.001), AngleAP-LV는 두 자세 사이에 비슷했다. 심장정지인 임신부에서 좌측으로 기울림은 흉부압박의 심장펌프 효과를 떨어뜨릴 수도 있다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.11-11
• /
• 2008

ZnO has a very large exciton binding energy (60 meV) as well as thermal and chemical stability, which are expected to allow efficient excitonic emission, even at room temperature. ZnO based electronic devices have attracted increasing interest as the backplanes for applications in the next-generation displays, such as active-matrix liquid crystal displays (AMLCDs) and active-matrix organic light emitting diodes (AMOLEDs), and in solid state lighting systems as a substitution for GaN based light emitting diodes (LEDs). Most of these electronic devices employ the electrical behavior of n-type semiconducting active oxides due to the difficulty in obtaining a p-type film with long-term stability and high performance. p-type ZnO films can be produced by substituting group V elements (N, P, and As) for the O sites or group I elements (Li, Na, and K) for Zn sites. However, the achievement of p-type ZnO is a difficult task due to self-compensation induced from intrinsic donor defects, such as O vacancies (Vo) and Zn interstitials ($Zn_i$), or an unintentional extrinsic donor such as H. Phosphorus (P) doped ZnO thin films were grown on c-sapphire substrates by radio frequency magnetron sputtering with various Ar/ $O_2$ gas ratios. Control of the electrical types in the P-doped ZnO films was achieved by varying the gas ratio with out post-annealing. The P-doped ZnO films grown at a Ar/ $O_2$ ratio of 3/1 showed p-type conductivity with a hole concentration and hole mobility of $10^{-17}cm^{-3}$ and $2.5cm^2/V{\cdot}s$, respectively. X-ray diffraction showed that the ZnO (0002) peak shifted to lower angle due to the positioning of $p^{3-}$ ions with a smaller ionic radius in the $O^{2-}$ sites. This indicates that a p-type mechanism was due to the substitutional Po. The low-temperature photoluminescence of the p-type ZnO films showed p-type related neutral acceptor-bound exciton emission. The p-ZnO/n-Si heterojunction LEO showed typical rectification behavior, which confirmed the p-type characteristics of the ZnO films in the as-deposited status, despite the deep-level related electroluminescence emission.

• 한국정보통신학회논문지
• /
• 제10권4호
• /
• pp.659-666
• /
• 2006

서보 모터는 컴퓨터와 센서로부터 오는 지령에 대해 정밀한 모션제어 즉, 정확한 속도조절과 위치 잡기를 수행함으로써 자동화 시스템에서 중요한 부분으로 사용된다. 특히, 선형추진 BLDC모터는 볼스크류, 타이밍 벨트, 랙/피니온과 같은 마찰 유도 전달 메카니즘들과 연결을 갖는 회전식 서보모터들에 비해 다양한 장점들을 갖는다. 본 논문은 정현파 구동형 선형 추진 BLDC모터의 동특성과 출력들로부터 얻어지는 정보를 이용하여 미지의 전동기 계통 파라미터들을 추정하는 방식을 제안한다. 추정된 파라미터들은 제어기와 외란 관측기의 이득을 조절하는데 사용될 수 있다. 이러한 목적을 이루기 위해 고성능의 디지털신호처리프로세서로 계자기준제어(FOC)기법을 구현하기 위해 설계된 TMS320F240을 선형 BLDC 서보 전동기의 제어기로서 사용한다. 이 서보전동기 응용 전용의 DSP는 A/D Converter와 PWM 발생부, 다수의 IO Port를 내장하고 있어 서보모터 제어기에 중요한 역할을 담당하게 된다. 이 선형 BLDC 서보 전동기 시스템은 또한 IPM 구동기와 홀센서 타입의 전류센서모듈 그리고 게이트 구동 신호와 고장 신호들의 전기적 절연을 위한 광결합 모듈을 포함한다.

• 한국과학예술포럼
• /
• 제37권2호
• /
• pp.275-292
• /
• 2019

본 연구는 디자인 문제해결 과정에서 이미지 형상화를 위한 방법으로 모방에 익숙한 것에 대해, 모방외에 보다 창의적인 시도와 새롭고 다양한 접근이 요구됨에 주목하여 시작하게 되었다. 이에 비정형에 대한 이해와 개념적 접근으로 하는, 인문학과 시각예술의 융합 연구를 하였다. 본 연구의 목적은 기존의 비정형과 관련 있는 기초디자인 실습사례에서, 실습과정 전후에 요구되는 이론적 접근과 결과물 설명에 대해 보다 깊이 있는 연구와 더불어 디자인적 표현을 가능케 하는 비정형 언어를 개발하는 것이며, 이에 대한 실습과정을 체계화하여 제시하는 것이다. 연구의 방법으로는 선행연구, 관련 작품 및 작가에 대한 조사와 더불어 비정형 관련 교육 실습 등을 통해 관련 단어를 수집하고 공통되거나 반복되는 단어 또는 내용을 군집화하고 계층화하여 세부항목을 도출하는 것이다. 연구결과로 비정형 작동기제이며 비정형 언의의 상위 항목으로 공간적 위치 짓기 체계에서의 수평성, 공간과 시간의 분리에서 펄스, 체계의 구조적 질서에서의 엔트로피, 물질의 제한에 있어서의 저급유물론 등과 관련되는 비정형 언어를 제시하였다. 이들은 조형요소의 시각요소로, 형태, 형상, 크기, 명암, 색채, 질감, 공간, 구조 등과 관계하며, 하위 항목으로 다양한 형용사적인 의미를 가지고 있다. 이에 비정형 시각예술의 전반적인 단계(이론적 접근, 실습과정, 결과물 표현 등)에서 비정형 언어를 이해하고 표현할 수 있도록 하는 기초디자인 교육 자료를 제시하였다. 이러한 연구결과를 바탕으로, 서로 다른 반미학적인 새로운 조형미를 표현하게 하고 이를 이해하게 하는 교육적 콘텐츠로, 사회적 정체성을 드러내는 역할로, 또한, 이에 대한 교육 자료가 비정형 시각예술 관련 연구에 참고자료로 활용되기를 기대한다.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1210-1210
• /
• 2001

On farm analysis of protein, moisture and oil in cereals and oil seeds is quickly being adopted by Australian farmers. The benefits of being able to measure protein and oil in grains and oil seeds are several : $\square$ Optimize crop payments $\square$ Monitor effects of fertilization $\square$ Blend on farm to meet market requirements $\square$ Off farm marketing - sell crop with load by load analysis However farmers are not NIR spectroscopists and the process of calibrating instruments has to the duty of the supplier. With the potential number of On Farm analyser being in the thousands, then the task of calibrating each instrument would be impossible, let alone the problems encountered with updating calibrations from season to season. As such, NIR technology Australia has developed a mechanism for \ulcorner\ulcorner\ulcorner their range of Cropscan 2000G NIR analysers so that a single calibration can be transferred from the master instrument to every slave instrument. Whole grain analysis has been developed over the last 10 years using Near Infrared Transmission through a sample of grain with a pathlength varying from 5-30mm. A continuous spectrum from 800-1100nm is the optimal wavelength coverage fro these applications and a grating based spectrophotometer has proven to provide the best means of producing this spectrum. The most important aspect of standardizing NIB instruments is to duplicate the spectral information. The task is to align spectrum from the slave instruments to the master instrument in terms of wavelength positioning and then to adjust the spectral response at each wavelength in order that the slave instruments mimic the master instrument. The Cropscan 2000G and 2000B Whole Grain Analyser use flat field spectrographs to produce a spectrum from 720-1100nm and a silicon photodiode array detector to collect the spectrum at approximately 10nm intervals. The concave holographic gratings used in the flat field spectrographs are produced by a process of photo lithography. As such each grating is an exact replica of the original. To align wavelengths in these instruments, NIR wheat sample scanned on the master and the slave instruments provides three check points in the spectrum to make a more exact alignment. Once the wavelengths are matched then many samples of wheat, approximately 10, exhibiting absorbances from 2 to 4.5 Abu, are scanned on the master and then on each slave. Using a simple linear regression technique, a slope and bias adjustment is made for each pixel of the detector. This process corrects the spectral response at each wavelength so that the slave instruments produce the same spectra as the master instrument. It is important to use as broad a range of absorbances in the samples so that a good slope and bias estimate can be calculated. These Slope and Bias (S'||'&'||'B) factors are then downloaded into the slave instruments. Calibrations developed on the master instrument can then be downloaded onto the slave instruments and perform similarly to the master instrument. The data shown in this paper illustrates the process of calculating these S'||'&'||'B factors and the transfer of calibrations for wheat, barley and sorghum between several instruments.

• 항공우주정책ㆍ법학회지
• /
• 제31권2호
• /
• pp.99-143
• /
• 2016

General aviation and air transport are two wings of the civil aviation industry. Chinese air transport is developing rapidly, and has become the world second air transport system only second to US since 2005. However, Chinese civil aviation is far behind the world average level, and cannot meet requirements of economic construction and social development. The transition and structural adjustment of Chinese economy provide the general aviation with a unprecedented broad market. The prospect of general aviation is promising and anticipated. The development of general aviation industry needs the legislative supports, and the current legislative conditions of Chinese general aviation are undoubtedly far behind the realistic requirements. Accelerating the legislation in Chinese general aviation industry requires scientific legislation concept. First, Legislation must promote development of general aviation industry. The general aviation will serves as a Chinese emerging industry that boosts domestic demand, promotes employment and expedite domestic economic development. We should, based on both the concept of promoting the industrial development of general aviation and national industrial planning, enact and rectify relative laws and regulations. And we should also straighten out the relationship between aviation security and industrial development and promote the revolution of low-altitude airspace management in an all-round way, in order to improve the utilization rate of airspace resources, classify and establish airspace, simplify examination and approval procedure and intensify operation management. In addition, what we should do is to expedite the infrastructure layout construction, guide the differentiated but coordinated development of general aviation industries in various areas, establish a united supervision mechanism of general aviation, redistrict the responsibilities of Chinese Air Control Agency and set up legislation, law enforcement and judicial systems with clarified institutions, clear positioning and classified responsibilities, so as to usher in a new era of the legislative management of Chinese general aviation industry. Second, shift the focus from regulations to both regulations and services. Considering the particularity of the general aviation, we should use American practices for reference and take into account both regulation and service functions when enacting general aviation laws. For example, we should reduce administrative licensing and market supervision, and adopt "criteria" and "approval" management systems for non-commercial and commercial aviation. Furthermore, pay attention to social benefits. Complete social rescuing mechanism through legislation. It should be clarified in legislation that general aviation operators should take the responsibilities of, and ensure to realize social benefits of environmental protection and ecological balance .Finally, rise in line with international standards. Modify Chinese regulations which is inconsistent with international ones to remove barriers to international cooperation. Specify basic legislative principles. One is the principle of coordination. Realize coordination between the civil aviation and general aviation, between military aviation and civil aviation, and among departments. Two is the principle of pertinence. The general aviation has its own rules and specialties, needing to be standardized using specialized laws and regulations. Three is the principle of efficiency. To realize time and space values of general aviation, we should complete rules in aerospace openness, general aviation airport construction, general aviation operations, and regulation enforcement. Four is the principle of security. Balance the maximum use of resources of Chinese airspace and the according potential threats to Chinese national interests and social security, and establish a complete insurance system which functions as security defense and indemnificatory measure. Establish a unified legal system. Currently, the system of Chinese general aviation laws consists of national legislation, administrative laws and regulations and civil aviation regulations (CAR). Some problems exist in three components of the system, including too general content, unclear guarantee measures, incomplete implementation details, and lacking corresponding pertinence and flexibility required by general aviation regulations, stringency of operation management and standards, and uniformity of standards. A law and regulation system, centered on laws and consisting of administrative laws regulations, industrial regulations, implementation details, industrial policies and local laws and regulations, should be established. It is suggested to modify the Civil Aviation Law to make general aviation laws complete, enact the Regulations of General Aviation Development, and accelerate the establishment, modification and abolition of Chinese general aviation laws to intensify the coordination and uniformity of regulations.