• Journal of Electrical Engineering and Technology
• /
• v.11 no.2
• /
• pp.537-542
• /
• 2016

The demand for LBS (Location Based Services) is increasing in the development of communication and mobile technologies. Positioning technology is a core technology for LBS, because LBS is based on a position of each device or user. But positioning technology especially for indoor environments is getting a lot of attention. Indoor positioning errors usually occur seriously in indoor environments where APs (Access Points) are set in a very concentrated and complex arrangement. In order to reduce indoor positioning errors, we adopt DOP (Dilution of Precision) which reflects an APs configuration information. In this paper, we propose an enhanced indoor positioning method using IEEE 802.11 RSSI measurements and AP configuration information.

• Journal of Positioning, Navigation, and Timing
• /
• v.5 no.3
• /
• pp.145-156
• /
• 2016

A variety of methods for indoor positioning systems have been underway to ensure the safety of emergency rescuers who are working in dangerous situations such as fire fighters. However, since most systems display locations of rescue workers in two-dimension (2D)-based maps, it is difficult for a commander located in the outside to recognize locations of rescuers inside the building intuitively. An augmented reality (AR)-based indoor positioning monitoring system can display locations of rescuer inside the building that can be seen by commanders to help intuitive recognition of positioning. To monitor AR-based indoor positioning, it is necessary to have an estimation technique of line of sight vector of observers. In the present study, an estimation technique of a line of sight vector using ultra-wide band tranceiver installed inside the indoor to trace locations is presented.

• Journal of Digital Convergence
• /
• v.11 no.4
• /
• pp.243-249
• /
• 2013

In this paper, GPS(Global Positioning System) that can be used outdoors and GPS(Global Positioning System) is not available for indoor Wi-Fi(Wireless Fidelity) using the Android-based location information system has been designed and implemented. Pedestrians in a room in order to estimate the location of the pedestrian's position, regardless of need to obtain the absolute position and relative position, depending on the movement of pedestrians in a row it is necessary to estimate. In order to estimate the initial position of the pedestrian Wi-Fi Fingerprinting was used. Most existing Wi-Fi Fingerprinting position error small WKNN(Weighted K Nearest Neighbor) algorithm shortcoming EWKNN (Enhanced Weighted K Nearest Neighbor) using the algorithm raised the accuracy of the position. And in order to estimate the relative position of the pedestrian, the smart phone is mounted on the IMUInertial Measurement Unit) because the use did not require additional equipment.

• Journal of Satellite, Information and Communications
• /
• v.8 no.4
• /
• pp.64-69
• /
• 2013

Recently, users who are interested in the service at indoor spaces is increasing. An indoor positioning system can minimize a range of positioning error using a variety of wireless communication infrastructure. Also, the system improves an indoor positioning accuracy by combining a mobile communication network. However, flexible positioning technologies regardless of an environment are insufficient. Therefore, this is time for a systematic study on an indoor positioning system business model. This paper classify differences between an indoor positioning system technology and outdoor positioning system technology. And we research a construction and application of the indoor positioning system that is adapted a wireless communication system (Wi-Fi, Bluetooth, RFID, UWE, Fingerprint, etc.) in domestic and foreign. We present a successful model of indoor positioning system and the development for future systems.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.10
• /
• pp.20-28
• /
• 2011

This paper proposes a reliable high-precision positioning system that converges a satellite navigation system and a vision system in order to resolve position errors and outdoor shaded areas, two disadvantages of a satellite navigation system. In kinematic point positioning, the number of available satellite navigation systems changes in accordance with a moving object's position. For location determination of the object, it should receive location data from at least four satellite navigation systems. However, in urban areas, exact location determination is difficult due to factors like high buildings, obstacles, and reflected waves. In order to deal with the above problem, a vision system was employed. First, determine an exact position value of a specific building in urban areas whose environment is poor for a satellite navigation. Then, identify such building by a vision system and its position error is corrected using such building. A moving object can identify such specific building using a vision system while moving, make location data values, and revise location calculations, thereby resulting in reliable high precision location determination.

• The Journal of Korean Institute of Information Technology
• /
• v.16 no.12
• /
• pp.69-74
• /
• 2018

The road name address is a two-dimensional location marking method for naming each road and assigning a number to each building. However, the road name address only shows the necessary parts for administrative and legal acts, and it does not properly display the main characteristics of various roads and non-residential areas. This has become more and more difficult to standardize different location identification methods, merely as a separate location identification method. This paper proposes road-based 3D location identification code to overcome the difficulties of integrating different location identification methods in Korea and to overcome the limit of 2D plane. This is a method to integrate various location identification methods based on roads and to identify spatial coordinates. It is a study on 3D digital coding of the land suitable for the 4th Industrial Revolution era.

• Journal of Positioning, Navigation, and Timing
• /
• v.2 no.1
• /
• pp.91-100
• /
• 2013

This paper introduces an indoor sensor fusion wireless communication device which provides the Location Based Service (LBS) using fire prevention facility. The proposed system can provide information in real time by optimizing the hardware of Wi-Fi technology. The proposed system can be applied to a fire prevention facility (i.e., emergency exit) and provide information such as escape way, emergency exit location, and accident alarm to smart phone users, dedicated terminal holders, or other related organizations including guardians, which makes them respond instantly with lifesaving, emergency mobilization, etc. Also, the proposed system can be used as a composite fire detection sensor node with additional fire and motion detect sensors.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.6B
• /
• pp.888-894
• /
• 2010

For the indoor positioning, wireless fingerprinting is most favorable because fingerprinting is most accurate among the technique for wireless network based indoor positioning which does not require any special equipments dedicated for positioning. The deployment of a fingerprinting method consists of off-line phase and on-line phase and more efficient and accurate methods have been studied. This paper proposes a bayesian algorithm for wireless fingerprinting and indoor location determination using fuzzy clustering with bayesian learning as a statistical learning theory.

• Journal of Electrical Engineering and Technology
• /
• v.4 no.1
• /
• pp.131-134
• /
• 2009

We have proposed an indoor positioning system for moving objects and/for the blind or visually impaired to play various sports. [ for a blind or visually impaired playing various sports.] This system consists of a wireless heart rate monitor, wireless sensor network and / 4 ultrasound satellites [ configuration with four ultrasound satellite modules) at the corners of the room. This system provides / the real-time measurement of the location and heart rate of the person in the room[ non-invasive measurement method of the heart rate and the location of a person in real time ], and will help the [a] blind or visually impaired enjoy sports more easily.

• Journal of Positioning, Navigation, and Timing
• /
• v.8 no.2
• /
• pp.69-77
• /
• 2019

This study introduces MATLAB Graphical User Interface (GUI)-based software to monitor ionospheric disturbances. This software detects ionospheric disturbances using Global Positioning System (GPS) and Global Navigation Satellite System (GLONASS) measurements, and estimates a location of the disturbance source through the detected disturbance. In addition, this software includes a sky plot making function and frequency analysis function through wavelet transform. To evaluate the performance of the developed software, data of 2011 Tohoku earthquake in Japan were analyzed by using the software. The analysis results verified that the ionospheric disturbances were detected through GPS and GLONASS measurements, and the location of the disturbance source was estimated through the detected disturbance.