• Korean Journal of Digital Imaging in Medicine
• /
• v.10 no.1
• /
• pp.13-19
• /
• 2008

Purpose : In sponge quality of the material in digital radiography environment coating because do position blocks two that do not become coating done positioning blocks two that do not become coating done positioning block and sponge quality of the material to testing bench image artifact's difference compare. Method of study : In digital radiography environment positioning block of different two products same sunshine or effect that image and positioning block artifact gents in image analyze. the target used positioning block 2 when examine hand, rib and examination condition did each differently according to used positioning block. reflex compared picture that do image and verify that examine first time. Result : 1. In sponge quality of the material coating in done product artifact appear. Did not appear in product that do not become coating. 2. Can know coating's existence, that artifact according to radish happens. 3. Quality of the material coating's existence, there was difference of slippage according to radish Conclusion : Quality of the material coating phenomenon that done positioning block thus, it may have to be considered that use after estimate degree that get in image.

• Imaging Science in Dentistry
• /
• v.45 no.2
• /
• pp.117-122
• /
• 2015

Purpose: Panoramic radiographs taken using conventional chin-support devices have often presented problems with positioning accuracy and reproducibility. The aim of this report was to propose a new bite block for panoramic radiographs of anterior edentulous patients that better addresses these two issues. Materials and Methods: A new panoramic radiography bite block similar to the bite block for dentulous patients was developed to enable proper positioning stability for edentulous patients. The new bite block was designed and implemented in light of previous studies. The height of the new bite block was 18 mm and to compensate for the horizontal edentulous space, its horizontal width was 7 mm. The panoramic radiographs using the new bite block were compared with those using the conventional chin-support device. Results: Panoramic radiographs taken with the new bite block showed better stability and bilateral symmetry than those taken with the conventional chin-support device. Patients also showed less movement and more stable positioning during panoramic radiography with the new bite block. Conclusion: Conventional errors in panoramic radiographs of edentulous patients could be caused by unreliability of the chin-support device. The newly proposed bite block for panoramic radiographs of edentulous patients showed better reliability. Further study is required to evaluate the image quality and reproducibility of images with the new bite block.

• Current Industrial and Technological Trends in Aerospace
• /
• v.8 no.1
• /
• pp.77-85
• /
• 2010

The current GPS constellation consists of 32 Block IIA/IIR/IIR-M satellites including 12 Block IIA satellites on service over 15 years. The satellites in poor space conditions may suffer from anomalies, especially influenced by aging atomic clocks which are of importance positioning and timing. Recently, the IGS Ultra-rapid predicted products have not shown acceptably high quality prediction performance because the Block IIA cesium clocks may be easily affected by various factors such as temperature and environment. The anomalies of aging clocks involve lower performance of positioning in the GPS applications. We, thus, describe satellite clock behaviors and anomalies induced by aging clocks and their detection technologies to avoid such anomalies.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10A
• /
• pp.727-735
• /
• 2009

To alleviate positioning error using wireless ultra-wideband (UWB) is primary concern, and it has been studied how to reduce the positioning error effectively. Thanks to many repeated transmissions of UWB signals, we can have a variety of selections to point out the most precise positioning result. Towards this, scanning method has been preferred to be used due to its simplicity. This exhaustive method firstly fixes the candidate position, and calculates the sum of distances from observed positions. However, it has tremendous number of computations, and the complexity is more serious if the size of two-dimensional range is the larger. To mitigate the large number of computations, this paper proposes the technique employing genetic algorithm and block windowing. To exploit its superiority, simulations will be conducted to show the reduction of complexity, and the efficiency on positioning capability.

• The Korean Journal of Pain
• /
• v.33 no.2
• /
• pp.138-143
• /
• 2020

Background: Severe pain associated with proximal femur fractures makes the positioning for regional anesthesia a challenge. Systemic administration of analgesics can have adverse effects. Individually, both the fascia iliaca block (FIB) and femoral nerve blocks (FNB) have been studied. However, there is little evidence comparing the two. The aim of this study was to compare the overall efficacy of the two blocks in patients with proximal femur fracture before positioning for spinal anesthesia. Methods: ASA (American Society of Anesthesiologists) class I, II, and III patients scheduled for elective and emergency surgery with the diagnosis of proximal femur fracture between October 2018 and June 2019 were included in the study. The patients were assigned to two groups by convenience nonprobability sampling of 35 each. Results: Our study showed a reduction in visual analogue scale scores at 3, 4, and 5 minutes after administration of the FIB being 5.1 ± 1.1, 4.1 ± 1.3, and 2.8 ± 0.8, and those after the FNB as 4.4 ± 1.1, 3.3 ± 1.1, and 2.1 ± 1.4 with P < 0.05, which was statistically significant. The mean first rescue analgesia time for the FIB was 7.1 ± 2.1 hours, while for the FNB it was 5.2 ± 0.7 hours. The P value was less than 0.001, which was significant. Conclusions: Both ultrasound guided FNB and FIB techniques provide sufficient analgesia for patient's positioning before spinal anesthesia. However, the duration of postoperative analgesia provided by FIB was greater than that of the FNB.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.5
• /
• pp.76-81
• /
• 2011

In the shipbuilding industry, accuracy management is one of the keys for strengthening competitiveness. However, ship block errors are unavoidable in the block erection stage because of the deformation of the blocks. Currently, accuracy managers decide whether or not block corrections are needed, based on measured and designed point data. They adjust the locations of hull blocks so that the blocks are aligned with other assembly blocks based upon the experience of production engineers. This paper proposes an optimization process that can adjust the locations of ship blocks during the erection stage. A genetic algorithm is used for this optimization scheme. Finally, the feasibility of the proposed method is discussed using several case studies. We found that the proposed method can find the optimized re-alignment of erection blocks, as well as improve the productivity of the erection stage.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.2 no.3
• /
• pp.171-176
• /
• 2010

This paper proposes the application of sensor technology to assemble ship blocks efficiently. A sensor-based monitoring system is designed and implemented to improve shipbuilding productivity by reducing the labor cost for the adjustment of adequate positioning between ship blocks during pre-erection or erection stage. For the real-time remote monitoring of relative distances between two ship blocks, sensor nodes are applied to measure the distances between corresponding target points on the blocks. Highly precise positioning data can be transferred to a monitoring server via wireless network, and analyzed to support the decision making which needs to determine the next construction process; further adjustment or seam welding between the ship blocks. The developed system is expected to put to practical use, and increase the productivity during ship blocks assembly.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.1
• /
• pp.21-32
• /
• 1999

Mapping and precise point determination by photogrammetry have been shown to be an economic solution. But control points are necessary to determine the exterior orientation parameters. Although the number of required control points has been reduced based on extended bundle adjustment and reinforced cross-strip, the ground survey is a significant factor of whole expenses in photogrammetry. The status of GPS-photogrammetry with kinematic DGPS-positioning to overcome this disadvantages, is now steadly progressive since the first possibility has been proved. The completed satellite configuration, powerful receiver function and upgraded software for kinematic DGPS-positioning have extensively improved the accuracy of combined bundle adjustment. So the research for the operational use of GPS-photogrammetry is absolutely necessary. The presented test field was designed for identification of subsidences in a coal mining area, flown with 60％ sidelap and cross strips. Just with 6 control points and combined block adjustment instead of the traditionally used 21 horizontal and 81 vertical control points the same ground accuracy has been reached. The accuracy of kinematic GPS-positioning and combined block adjustment was independent upon the distance of the ground reference station. It also has been showed that the special model for the systematic error correction in the combined block adjustment.

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.1
• /
• pp.59-65
• /
• 2023

A GNSS receiver must perform signal acquisition to estimate the code phase and Doppler frequency of the incoming satellite signals, which are essential information for baseband signal processing. Modernized GNSS signals have different modulation schemes and long PRN code lengths from legacy signals, which makes it difficult to acquire the signals and increases the computational complexity and time. This paper proposes a novel FFT/Inverse-FFT with baseband resampling to resolve the aforementioned challenges. The suggested algorithm uses a single block only for the FFT and thereby requires less hardware resources than conventional structures such as Double Block Zero Padding (DBZP). Experimental results based on a MATLAB simulation show this algorithm can successfully acquire GPS L1C/A, GPS L2C, Galileo E1OS, and GPS L5.

• Journal of Korea Multimedia Society
• /
• v.15 no.12
• /
• pp.1506-1516
• /
• 2012

In a ship block logistics application, acquisition of locations is required in order to identify location of the ship blocks. A Smart device equipped with a GPS sensor can be used as a mobile client for a ship block logistics application. However the precision of GPS components on a commercial smart device is not high enough. Therefore, using the GPS for localization may produce significant positioning errors in a ship block logistics system. This paper proposes a method to reduce errors in measuring locations using a smart device. Based on the knowledge of how the location information is used in a ship block logistics application, and the predictability of the client's moving line based on geographical layout of a shipyard area, our proposed technique enables a better prediction of the ship blocks location. Performance evaluation shows that the proposed technique can significantly reduce the positional error.