• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.7
• /
• pp.569-581
• /
• 1989

This paper deals with a tracking algorithm based on integral projection which tracks moving targets with varying brightness and size. An adaptive windowing technique is employed to reduce the sensitivity of the system to the complex background image and also to reduce the computational load. The threshold value is determined by considering both the size and the threshold value of the brightness intensity of the recognized target obtained in the previous processing step. Window position is estimated by using the information of the velocity and acceleration of the target. And integral projection is applied to find the position of the target in the window accurately. Experimental results show that moving targets with varying brightness and size can be tracked properly in noisy environments.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.1
• /
• pp.65-70
• /
• 2002

In this thesis, we realized tracking system for the purpose of receiving performance improvement of KOREASAT's signal in Korea peninsula. Using Scan-mode antenna point out receivable area without position information sensor and using step-track algorithm reach to peak level. Furthermore, the performance of the completed system was verified by physical experiments that directly receives satellite signal. And decided the optimal size of steps for tracking speed and structure of the system by reiterative approach experiments.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.12 s.177
• /
• pp.77-86
• /
• 2005

This paper is about the development of Automatic FPC(flexible printed circuit) punching instrument for the improvement of working condition and cost saving. FPC is used to detect the contact position of keyboard and button like a cellular phone. Depending on the quality of the printed ink and position of reference punching point to the FPC, the resistance and current are varied to the malfunctioning values. The size of reference punching point is 2mm and the above. Because the punching operation is done manually, The punching accuracy is varied with operator's condition. Recently, The punching accuracy has deteriorated severely to the 2mm punching reference hall so that assembly of the K/B has hardly done. To improve this manual punching operation to the FPC, automatic FPC punching system is introduced. Precise mechanical parts like a 5-step stepping motor and ball screw mechanism are designed and tested and low cost PC camera is used fur the sake of cost down instead of using high quality vision systems for the factory automation. Test algorithms and programs showed good results to the designed automatic punching system and led to the increasement of productivity and huge cost down to law material like FPC by avoiding bad quality.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.75-78
• /
• 1989

In this paper, A last time delay damper is presented for HB ( HyBrid ) step motor, which has large oscillation characteristics.The design objective is to develop a cost-effective and good-performance damper that would be applyed to HB step motor / driver system without the addition of transducer that would add a weight, size and cost to the system. The Back EMF signal which is recovered from current and voltage signal is used for the measuring the rotor position. It would be possible to get more accurate delay time for the motor driver system. It is proved that the maximum overshoot can be reduced to 13% at stopping through experiment.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.229-231
• /
• 1994

In recent years, as the industry has been highly developed and precised, its driving and control system have been changed, what is more, revolutionized. The requirements of these change are more accuracy, more high efficiency, more miniaturized size and more servo functions. Step motor has been adopted for driving servo systems, because of easier controllability, open-loop control, high position accuracy at low speed. In this paper, we deal with developing step motor system, and describe the procedure that contains design, analysis. testing characteristics.

• Progress in Medical Physics
• /
• v.11 no.1
• /
• pp.49-57
• /
• 2000

New method about the dose optimization problem in radiation treatment was researched. Since all conditions are more complex and there are more relevant variables, the solution of three-dimensional treatment planning is much more complicate than that of current two-dimensional one. There(ore, in this study, as a method to solve three-dimensional dose optimization problem, the considered variables was minized and researched by reducing the domain that solutions can exist and pre-determining the important beam parameters. First, the dangerous beam range that passes critical organ was found by coordinate transformation between linear accelerator coordinate and patient coordinate. And the beam size and rotation angle for rectangular collimator that conform tumor at arbitrary beam position was also determined. As a result, the available beam position could be reduced and the dependency on beam size and rotation angle, that is very important parameter in treatment planning, totally removed. Therefore, the resultant combinations of relevant variables could be greatly reduced and the dose optimization by objective function can be done with minimum variables. From the above results, the dose optimization problem was solved for the two-dimensional radiation treatment planning useful in clinic. The objective function was made by combination of dose gradient, critical organ dose and dose homogeniety. And the optimum variables were determined by applying step search method to objective function. From the dose distributions by optimum variables, the merit of new dose optimization method was verified and it can be implemented on commercial radiation treatment planning system with further research.

• Proceedings of the KIEE Conference
• /
• 2000.11b
• /
• pp.309-311
• /
• 2000

An advanced angular position detector (APD) for the SMART CEDM (control element drive mechanism) was designed. The APD is required to be small size with high resolution for angular displacement of rotary step motor. Unfortunately the proximity sensors can not be adopted to SMART CEDM because the motor shaft is located in the pressure boundary cylinder filled with the primary coolant under high temperature and pressure. This paper describes the electromagnetic finite element analysis for the design of advanced angular position detector for the SMART CEDM. The electromagnetic properties obtained will be used as Input for the optimization analysis of the APD.

• Journal of Astronomy and Space Sciences
• /
• v.15 no.1
• /
• pp.229-234
• /
• 1998

We study on a terrain contour matching algorithm using Radial Basis Functions(RBFs) for aided inertial navigation system for position fixing aircraft, cruise missiles or re-entry vehicles. The parameter optimization technique is used for updating the parameters describing the characteristics of an area with modified Gaussian least square differential correction algorithm and the step size limitation filter according to the amount of updates. We have applied the algorithm for matching a sampled area with a target area supposed that the area data are available from Radar Terrain Sensor(RTS) and Reference Altitude Sensor(RAS)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.161-166
• /
• 2001

The static characteristics of four-nozzle flapper valves are investigated with both constant flow and constant supply pressure. The ranges, in which linearization of these characteristics would be valid, are discussed. Linearized dynamic model is also derived. Numerical simulations of nonlinear dynamic model are carried out by HyPneu to make an assessment of the effect of input step size in both cases of no-load and blocked-load operation.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.45-48
• /
• 1987

In applications of step-motor, the requirements of small-size and strong-power gave birth to feed-back drive to the maximum efficiency and complete damping. In this paper, a new scheme that determines switching times from sensed values of position and speed is presented for simple bang-bang type drive circuit. The optimal values of each phase switching times are obtained using conjugate gradient method.