• 제목/요약/키워드: Position Sensor Fault Tolerant Control

검색결과 8건 처리시간 0.021초

고속 영구자석 동기전동기 구동장치의 홀센서 고장검출 및 보호제어 (Hall Sensor Fault Detection and Fault-Tolerant Control of High-Speed PMSM Drive System)

  • 장명혁;이광운
    • 전력전자학회논문지
    • /
    • 제18권3호
    • /
    • pp.205-210
    • /
    • 2013
  • This paper presents a novel hall sensor fault detection and fault-tolerant control method for a high-speed permanent magnet synchronous motor (PMSM) drive system. A phase locked loop (PLL) type position estimator is used with a conventional interpolation based rotor position estimator to reduce position errors due to misalignment of hall sensors. The expected trigger time of hall sensor's output is used for detecting hall sensor fault condition and the PLL type position estimator is reconfigured for fault-tolerant control at the hall sensor fault condition. The proposed method can minimize current ripples during the transition from sensored control using hall sensors to sensorless control. Experimental results have been proposed to prove the validity of the proposed method.

Fault Tolerant Control of Wind Turbine with Sensor and Actuator Faults

  • Kim, Jiyeon;Yang, Inseok;Lee, Dongik
    • 센서학회지
    • /
    • 제22권1호
    • /
    • pp.28-37
    • /
    • 2013
  • This paper presents a fault-tolerant control technique for wind turbine systems with sensor and actuator faults. The control objective is to maximize power production and minimize turbine loads by calculating a desired pitch angle within their limits. Any fault with a sensor and actuator can cause significant error in the pitch position of the corresponding blade. This problem may result in insufficient torque such that the power reference cannot be achieved. In this paper, a fault-tolerant control technique using a robust dynamic inversion observer and control allocation is employed to achieve successful pitch control despite these faults in the sensor and actuator. The observer based detection method is used to detect and isolate sensor faults by checking whether errors are larger than threshold values. In addition, the control allocation technique is adopted to tolerate actuator fault. Control allocation is one of the most commonly used fault-tolerant control techniques, especially for over-actuated systems. Further, the control allocation method can be used to achieve the power reference even in the event of blade actuator fault by redistributing the lost torque due to erroneous pitch position into non-faulty blade actuators. The effectiveness of the proposed method is demonstrated through simulations with a benchmark model of the wind turbine.

영구자석 동기발전기의 위치센서 고장 회피 제어 (Position Sensor Fault Tolerant Control of Permanent Magnet Synchronous Generator)

  • 이광운
    • 전력전자학회논문지
    • /
    • 제16권4호
    • /
    • pp.351-357
    • /
    • 2011
  • 영구자석 동기발전기의 벡터제어를 위해서는 회전자 위치가 필요하며 엔코더와 같은 위치센서가 위치 검출 목적으로 일반적으로 사용되고 있다. 그러나 위치센서의 사용은 영구자석 동기전동기 제어시스템의 신뢰성을 저하시킨다. 본 논문에서는 영구자석 동기전동기 제어시스템을 위한 위치센서 고장 회피 제어 방법을 제안한다. 확장 유기전력에 기반한 센서리스 위치 추정 알고리즘을 센서를 이용하는 벡터 제어와 병렬로 수행함으로써 위치센서 고장발생 시점에서 센서리스 벡터제어로 신속히 재구성할 수 있도록 하였다. 실험을 통해 제안된 방식의 유용성을 보인다.

A Realization Method of Fault-tolerant Control of Flexible Arm under Sensor Fault by Using an Adaptive Sensor Signal Observer

  • Izumikawa Yu;Yubai Kazuhiro;Hirai Junji
    • Journal of Power Electronics
    • /
    • 제6권1호
    • /
    • pp.8-17
    • /
    • 2006
  • In this paper, we propose a fault-tolerant control system for the position control and vibration suppression of a flexible arm robot. The proposed control system has a strain gauge sensor signal observer based on a reaction force observer and detects a fault by monitoring an estimated error. In order to improve the estimation accuracy, the plant parameters included in the sensor signal observer are updated by using the strain gauge sensor signal in normal time through the adaptive law. After fault detection, the proposed control system exchanges the faulty sensor signal for the estimated one and switches to a fault mode controller so as to maintain the stability and the control performance. We confirmed the effectiveness of the proposed control system through several experiments.

고장 허용 유도형 위치 센서 설계 (Design of Fault-Tolerant Inductive Position Sensor)

  • 백승국;박병철;노명규
    • 대한기계학회논문집A
    • /
    • 제32권3호
    • /
    • pp.232-239
    • /
    • 2008
  • The position sensors used in a magnetic bearing system are desirable to provide some degree of fault-tolerance as the rotor position is necessary for the feedback control to overcome the open-loop instability. In this paper, we propose an inductive position sensor that can cope with a partial fault in the sensor. The sensor has multiple poles which can be combined to sense the in-plane motion of the rotor. When a high-frequency voltage signal drives each pole of the sensor, the resulting current in the sensor coil contains information regarding the rotor position. The signal processing circuit of the sensor extracts this position information. In this paper, we used the magnetic circuit model of the sensor that shows the analytical relationship between the sensor output and the rotor motion. The multi-polar structure of the sensor makes it possible to introduce redundancy which can be exploited for fault-tolerant operation. The proposed sensor is applied to a magnetically levitated turbo-molecular vacuum pump. Experimental results validate the fault-tolerance algorithm.

Position Sensorless Control of PMSM Drive for Electro-Hydraulic Brake Systems

  • Yoo, Seungjin;Son, Yeongrack;Ha, Jung-Ik;Park, Cheol-Gyu;You, Seung-Han
    • 드라이브 ㆍ 컨트롤
    • /
    • 제16권3호
    • /
    • pp.23-32
    • /
    • 2019
  • This study proposed a fault tolerant control algorithm for electro-hydraulic brake systems where permanent magnet synchronous motor (PMSM) drive is adopted to boost the braking pressure. To cope with motor position sensor faults in the PMSM drive, a braking pressure controller based on an open-loop speed control method for the PMSM was proposed. The magnitude of the current vector was determined from the target braking pressure, and motor rotational speed was derived from the pressure control error to build up the braking pressure. The position offset of the pump piston resulting from a leak in the hydraulic system is also compensated for using the open-loop speed control by moving the piston backward until it is blocked at the end of stroke position. The performance and stability of the proposed controller were experimentally verified. According to the results, the control algorithm can be utilized as an effective means of degraded control for electro-hydraulic brake systems in the case that a motor position sensor fault occurs.

Design and Implementation of a Fault-Tolerant Magnetic Bearing System

  • Park, B.C.;Noh, M.D.;Ro, S.K.;Kyung, J.H.;Park, J.K.
    • KSTLE International Journal
    • /
    • 제4권2호
    • /
    • pp.37-42
    • /
    • 2003
  • One of the obstacles for a magnetic bearing to be used in the wide range of industrial applications is the failure modes associated with magnetic bearings, which we don't expect for conventional passive bearings. These failure modes include electric power outage, power amplifier faults, position sensor faults, and the malfunction of controllers. Fault-tolerant magnetic bearing systems have been proposed so that the system can operate in spite of some faults in the system. In this paper, we designed a fault-tolerant magnetic bearing system for a turbo-molecular vacuum pump. The system can cope with the actuator/amplifier faults which are the most common faults in a magnetic bearing system. We implemented the existing fault-tolerant algorithms to experimentally prove the adequacy of the algorithms for industrial applications. As it turns out, the system can operate even with three simultaneously failing poles out of eight actuator poles.

전기 자전거 구동용 위치 센서 고장 검출 제어 (Position sensor fault tolerant control of drive system for electric bicycle)

  • 박상준;이주석;이진우;송창희;목형수
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2012년도 전력전자학술대회 논문집
    • /
    • pp.73-74
    • /
    • 2012
  • 본 논문은 점차 성장하고 있는 전동기를 이용한 교통수단으로써의 전기 자전거에 적용된 위치 센서인 홀 센서의 고장 검출을 위한 방법 제시와 고장 회피를 위한 방법을 제시한다. 전동기를 응용한 전기 자전거, 전기 스쿠터, 전기 자동차, 전기 보트 등 다양한 분야에서 전동기의 사용이 점차 넓어지고 있지만 현재는 전동기의 구동 및 제어의 관점에서만 다루어 지고 있는 실정이다. 하지만 전동기의 구동 보다 더 중요한 문제는 사람을 운송하는 분야이기 때문에 높은 구동 안정성이 요구 되고 있다. 따라서 본 논문은 전기 자전거에 적용된 홀 센서의 고장의 종류에 대해 검토하고 고장으로 판단 한 이후 정상적인 구동이 가능 할 수 있도록 센서리스 구동으로의 전환이 가능 하도록 하였다. 이를 모의 실험과 실험을 통해 타당성을 검증 하고자 한다.

  • PDF