• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.4
• /
• pp.63-69
• /
• 2014

Due to population growth and urban development in construction technology has expanded living space, underground construction as public transport as has been extended to the ground and underground urban traffic congestion increases. This underpass Stations sphere of influence this development was the center of the living space, space-time became a cultural space. However underpass ground space and time and space are enormous difficulties in contrast visibility due to smoke when light levels are low fire occurs, momentary loss of judgment errors due to a sense of orientation, rapid diffusion and ambient oxygen deficiency due to acquisition limitations, such as the Open resulting in property damage and personal injury. The purpose of this study is to analyze the existing system with respect to the address of the underground shopping center and system for presenting an address to the underground shopping mall in the basement of the straight and circular in connection with the street name address. Also can be known only to evacuate their citizens to address the position in the event of a fire inside the basement through the underground shopping mall address standardization system, the fire department only address exact location is being judged will be identified.

• The Journal of Korean Society for Radiation Therapy
• /
• v.28 no.1
• /
• pp.27-34
• /
• 2016

Purpose : Retrospective evaluation of setup changes using the corrected position during helical tomotherapy Materials and Methods : Head and neck cancer patients were randomly sampled and summarized into 3 groups: Group 1(32) Brain, Group 2 2(28)Maxillar, Nasal cavity, Group 3 (35) Nasopharynx(NPX), Tongue, Tonsil, and Oropharynx(OPX). In 3 groups, the statistical tests based on repeated measurements among 30 times of the duration of treatment by applying X, Y, Z axis errors, roll, weight changes, and vectors as variables. Results : The statistical test results showed that there was no difference between x-axis (p = 0.458) and y-axis (p=0.986) and in roll (p = 0.037), weight change (p <0.001), and the vector (p <0.001). In addition, the pattern between the three groups based on the fraction revealed no difference in x-axis (p = 0.430) and roll (p = 0.299) but a difference in y-axis (.023), weight change (p = 0.001), and vector (p = 0.028). Conclusion : The results of the retrospective evaluation found the change in the group 3 with respect Y, Z, weight, and vector and a larger random error during the treatment including low neck.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.459-466
• /
• 2009

While Korean allows the same consonants at the coda of the preceding syllable and at the onset of the following syllable, English does not allow the geminate consonants in the same intervocalic position. Due to this difference between Korean and English, Korean learners of English tend to incorrectly produce geminate consonants for English geminate graphemes as in $su\underline{mm}er$. Based on this observation, a pilot study was designed to investigate how Korean learners of English perceive and produce English doubleton graphemes and singleton graphemes. Twenty Korean college students were asked to perform a forced-choice perception test as well as a production test for the 36 real word stimuli which consist of (near) minimal pairs of singleton and doubleton graphemes. The result showed that the accuracy rates for the words with singleton graphemes were higher than those for the words with doubleton graphemes both in perception and production because the subjects misperceived and misproduced the doubleton graphemes as geminates due to orthographic influence. In addition, the low error rates of the word with voiced stops were accounted for by Korean language transfer. Further, spectrographic analyses were provided where more production errors were witnessed in doubleton grapheme words than singleton grapheme words. Finally, pedagogical implications are provided.

• Progress in Medical Physics
• /
• v.11 no.2
• /
• pp.117-122
• /
• 2000

The IP(imaging plate) has been widely used to measure the two-dimensional distribution of incident radiation since it has a high sensitivity, reusability, a wide dynamic range, a high position resolution. Particularly, the easiness of acquiring digitized image using IP poses a strong merit because recent trend of data handling prefers image digitization. In order to test its usefulness in photon beam dosimetry, we measured the off-axis ratio(OAR) on portal planes and percent depth dose(PDD) within a phantom using IP, and compared the results with the data based on EGS4 Monte Carlo particle transport code, ion-chambers, conventional films. For the measurement, we used 6 MV X-rays, various field sizes. As a result, IP showed significant deviation from ion-chamber measurement: a significant overresponse, 100% greater than that of ion-chamber measurement at deep part of the phantom. Filtration of low-energy scattered photons at deep part of the phantom using 0.5 mm thick lead sheets did improve the result, only to the unacceptable extent. However, portal dose measurement showed possibilities of If as a dosimeter by showing errors less than 5%, as compared with film measurement.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.2
• /
• pp.169-175
• /
• 2020

This paper studied the SET situation in VLSI because the electronic devices exposed to SET can indicate irregular operation and output errors. The SET environment was established using the exponential static wave (iexp) in the fold-cascode comparator. The comparator was experimented with how it affected it by the SET. In a folded comparator that did not enter the SET situation, the propagation delay was measured at 0.26㎲ and the gain was 0.649. The MOSFET close to the output stage was measured sensitively in the folded comparator that entered the SET situation. And propagation delay was calculated from 0.36 to 0.37㎲ and the gain was 0.649. The mid-position MOSFET was calculated from 0.28 to 0.30㎲ and the gain was 0.649. The MOSFET, which is farthest from the output stage from the folded comparator, was calculated with the propagation delay between 0.25 and 0.26㎲ and the gain of 0.649. In SET situations, the MOSFET close to the output portion of the folded comparator was sensitive. And at the MOSFET far from the output, the same results were obtained as a normal folded comparator without the SET input.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.554-560
• /
• 2020

In the manufacturing process of flat panel displays, a high-precision planar motion stage is used to position a specimen. Stages of this type typically use frictionless linear motors and air bearings, and laser interferometers. Real-time dynamic correction of the yaw motion error is very important because the inevitable yaw motion error of the stage means a change in the specimen orientation. Gantry control is generally used to compensate for yaw motion errors. Flexure units that allow rotational motion are applied to the stage to apply this method to a stage using an air-bearing guide. This paper proposes a method to improve the constant speed motion performance of a H-type XY stage equipped with air bearing and flexure units. When applying the gantry control to the stage, including the flexure units, the cause of the mutual ripple generated from the linear motors is analyzed, and adaptive learning control is proposed to compensate for the mutual ripple. A simulation was performed to verify the proposed method. The speed ripple was reduced to approximately the 22 % level. The ripple reduction was verified by simulating the stage state where yaw motion error occurs.

• Archives of design research
• /
• v.20
• /
• pp.111-120
• /
• 1997

Recently, rapidly increasing internet Websites are providing us with the new kinds of multimedia informations without borders acting as the center for exchanging informations. Such new media informations through the internet passes informations via light on the monitor and provides the various informations, with the differentiation from the traditional printing media, it can be searched with electronic commands in limited space. In the process of adapting the new technologies, new media has successfully responded to the fast change and the development of its needs by experiencing the trials and errors, steadily establishing the stable position with its new information transferring and exchanging methods. The representative hompage of websites of information transformations means the first page containing no lower directories and consist of titles, icons, symbols and addresses and can design them in consideration of graphical process, planning, contents and others. Such hompages are very important since the graphical images shows its visual expressions deciding the total meanings of the hompages. In this research, we have analyzed the visual factors of frequencies, ratio of areas, distributions, alignment methodologies on layouts of hompages consisting titles, icons, contents and symbols, etc. from randomly picked samples of 161 hompages of websites in the internets of various areas. Generally, the homepages are designed with graphical expressions in personal way and the feedbacks and responses of such may differs, but we think, this can be used as reference materials for the analysis of new media in objective way. Also, it can be used as the base informations for arrangement and planning of designs with the characteristics of graphics and Graphic User Interfaces in the background which are implemented over internet.

• Journal of Biomedical Engineering Research
• /
• v.19 no.6
• /
• pp.595-602
• /
• 1998

Among the apex locators, the frequency dependent type is more accurate and convenient to use than others, But the accuracy of the apex locator is still influenced by the presence of various electrolytes used in root canal treatments. In this study, we have developed a frequency dependent electronic apex locator minimizing the influence of the electrolytes on the measurement of root canal lengths. It was also confirmed that two frequencies of 500Hz and 100kHz are optimal for the measuring impedance compare with commercial product used(400Hz and 8kHz)a and there were no differences in accuracy among the three different types of the waveforms; sinusoidal, triangular, and rectangular waves(p>0.05). Impedance ratio of the two different frequencies represents the position of the file in root canal, and the voltage difference of two signals represents the status of the fluid in the root canal. As a result of compensation using the voltage differences, the errors were decreased on the average from +0.54mm to +0.18mm in $H_2O_2$ solution (p<0.01), and from -0.33mm to -0.01mm in NaOCl solution(p<0.01). The accuracies based on ${\pm}$0.5mm, in $H_2O_2$ and NaOCl solutions were improved with the automatic compensation from 71.1% and 91.1% to 82.2% and 100% respectively.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.1
• /
• pp.1-8
• /
• 2005

Multi-beam echo sounder is more precise and efficient than single beam echo sounder relatively because it is able to survey a wide area with 3 times or 4 times swath width as much as the depth of water using multi-beam echo sounder. It is sure to be needed to control supplementary equipment accurately, however, because the principle of creation and measurement of the beam is elaborate and influenced a great deal by vessel's motion. We analyzed using visual and statistical methods in both sections of the depth of water where were the places of the center of the beam and ± 45° angles from the central beam to improve the precise of Multi-beam echo sounder in this study. In result, it was required to control supplementary equipment because of errors from the vibration of an inertia governor and misalignment of extra units. Therefore, we reduced the vibration from the vessel's engine by sticking rubbers to the inertia governor and measured the offset values of extra units accurately, converted them to the values of horizontal position and lined up. In result, the precise in sounding the depth at the place of ± 45° from the center of the beam was improved from the level of the 1st order to the special order in a hydrographic survey of the IHO S44 standards and a phenomenon of ripple patterns in the overlapped area by misalignment was decreased remarkably.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.10 no.1
• /
• pp.1394-1408
• /
• 1968

The tidal discharge is defined as the quantity of water flowing through a certain cross-section per unit of time, in contrast to river discharges, tidal discharges change periodically in magnitude and direction. Thus the total volumes of water flowing into again out of the system-called flood volume and ebb volume, respectively, depend on both the tidal and the river discharges. To ditermine the tidal discharge and the flood and ebb volumes of the Yong-san river, the discharges were measured at spring, mean and neap tide and simultaneous gage reading were taken at Samhak-do, Lower Myo-do, Myongsan-ni and Naju. The general procedure for measuring the tidal discharges was as follows. First, several cross-sections were measured and one of them was chosen. First, several cross-sections were measured and one of them was chosen. Then verticals were serected in the chosen cross section. Because comparatively few verticals should be representative of the discharge distribution over the river profile, the selection was done in accordance with the somtimes irregular bottom profile. The velocities were measured with the same current meters. The observations which included water level readings were continued for a period of about 13 hours. The current direction meter, a pyramid shaped resistance body, suspend in the water on a thin wire. The bubble in a circular tilting level fixed to the wire indicates the direction of the current. Reading were taken at intervals of 1m for depths of 10m or less, and for depths over 10m at intervals of 2m, going downwards and upwards. The averages of the two velocities were used for the computation of the discharges. The discharges and the flood and ebb volumes were ditermined by a graphical method. The mean velocities, corrected for their direction when necesary, were ditermined for each time interval and each vertical, and these velocities were plotted against the time. The resulting curves show possible mistakes very clearly, and the effect of observation errors could be reduced. The corrected velocities read from the curve at half-hour intervals were multiplied by the depth at the virtical at the corresponding time. The discharges thus found were ploted against the position of the vertical in the transit and joined by a smooth curve, integration of the curve rendered the total discharges as they occurred of half-hour intervals. Plotting these total discharges against the time yeilded during the day. The flood and ebb volumes were obtained by integration of the total discharge curve.