• Title/Summary/Keyword: Position Classification System

Search Result 142, Processing Time 0.032 seconds

Examination of trunk muscle co-activation during prolonged sitting in healthy adults and adults with non-specific chronic low back pain based on the O'Sullivan Classification System

  • Alameri, Mansoor;Lohman, Everett III;Daher, Noha;Jaber, Hatem
    • Physical Therapy Rehabilitation Science
    • /
    • v.8 no.4
    • /
    • pp.175-186
    • /
    • 2019
  • Objective: Non-specific chronic low back pain (NS-CLBP) has been related to abnormal trunk muscle activations, but literature reported considerable variability in muscle amplitudes of NS-CLBP patients during prolonged sitting periods. Therefore, the purpose of this study was to examine the differences among homogenous NS-CLBP subgroups in muscle activity, using muscle co-contraction indices as a more objective approach, and their roles on pain development during a 1-hour period of prolonged sitting. Design: Cross-sectional study. Methods: Twenty NS-CLBP subjects with motor control impairment (MCI) [10 classified as having flexion pattern disorder, and 10 with active extension pattern disorder], and 10 healthy controls participated in the study. Subjects followed a 1-hour sitting protocol on a standard office chair. Four trunk muscle activities including amplitudes and co-contraction indices were recorded using electromyography over the 1-hour period. Perceived back pain intensity was recorded using a numeric pain rating scale every 10 minutes throughout the sitting period. Results: All study groups presented with no significantly distinctive trunk muscle activities at the beginning of sitting, nor did they change over time when pain increased to a significant level. Both MCI subgroups reported a similarly significant increase in pain behavior through mid-sitting (p<0.001). However, after mid-sitting, they significantly differed from each other in pain (p<0.01) but did not differ in the levels of muscle activation. Conclusions: This study was the first to highlight the similarities in trunk muscle activities among homogenous NS-CLBP patients related to MCI and compared them to healthy controls while sitting for an extended period of time, and the significant increase in pain over the 1-hour sitting might not be attributed to trunk muscle activation.

Feasibility of Deep Learning Algorithms for Binary Classification Problems (이진 분류문제에서의 딥러닝 알고리즘의 활용 가능성 평가)

  • Kim, Kitae;Lee, Bomi;Kim, Jong Woo
    • Journal of Intelligence and Information Systems
    • /
    • v.23 no.1
    • /
    • pp.95-108
    • /
    • 2017
  • Recently, AlphaGo which is Bakuk (Go) artificial intelligence program by Google DeepMind, had a huge victory against Lee Sedol. Many people thought that machines would not be able to win a man in Go games because the number of paths to make a one move is more than the number of atoms in the universe unlike chess, but the result was the opposite to what people predicted. After the match, artificial intelligence technology was focused as a core technology of the fourth industrial revolution and attracted attentions from various application domains. Especially, deep learning technique have been attracted as a core artificial intelligence technology used in the AlphaGo algorithm. The deep learning technique is already being applied to many problems. Especially, it shows good performance in image recognition field. In addition, it shows good performance in high dimensional data area such as voice, image and natural language, which was difficult to get good performance using existing machine learning techniques. However, in contrast, it is difficult to find deep leaning researches on traditional business data and structured data analysis. In this study, we tried to find out whether the deep learning techniques have been studied so far can be used not only for the recognition of high dimensional data but also for the binary classification problem of traditional business data analysis such as customer churn analysis, marketing response prediction, and default prediction. And we compare the performance of the deep learning techniques with that of traditional artificial neural network models. The experimental data in the paper is the telemarketing response data of a bank in Portugal. It has input variables such as age, occupation, loan status, and the number of previous telemarketing and has a binary target variable that records whether the customer intends to open an account or not. In this study, to evaluate the possibility of utilization of deep learning algorithms and techniques in binary classification problem, we compared the performance of various models using CNN, LSTM algorithm and dropout, which are widely used algorithms and techniques in deep learning, with that of MLP models which is a traditional artificial neural network model. However, since all the network design alternatives can not be tested due to the nature of the artificial neural network, the experiment was conducted based on restricted settings on the number of hidden layers, the number of neurons in the hidden layer, the number of output data (filters), and the application conditions of the dropout technique. The F1 Score was used to evaluate the performance of models to show how well the models work to classify the interesting class instead of the overall accuracy. The detail methods for applying each deep learning technique in the experiment is as follows. The CNN algorithm is a method that reads adjacent values from a specific value and recognizes the features, but it does not matter how close the distance of each business data field is because each field is usually independent. In this experiment, we set the filter size of the CNN algorithm as the number of fields to learn the whole characteristics of the data at once, and added a hidden layer to make decision based on the additional features. For the model having two LSTM layers, the input direction of the second layer is put in reversed position with first layer in order to reduce the influence from the position of each field. In the case of the dropout technique, we set the neurons to disappear with a probability of 0.5 for each hidden layer. The experimental results show that the predicted model with the highest F1 score was the CNN model using the dropout technique, and the next best model was the MLP model with two hidden layers using the dropout technique. In this study, we were able to get some findings as the experiment had proceeded. First, models using dropout techniques have a slightly more conservative prediction than those without dropout techniques, and it generally shows better performance in classification. Second, CNN models show better classification performance than MLP models. This is interesting because it has shown good performance in binary classification problems which it rarely have been applied to, as well as in the fields where it's effectiveness has been proven. Third, the LSTM algorithm seems to be unsuitable for binary classification problems because the training time is too long compared to the performance improvement. From these results, we can confirm that some of the deep learning algorithms can be applied to solve business binary classification problems.

Correction of Sesamoid after Proximal Metatarsal Osteotomy and Distal Soft Tissue Procedure in Hallux Valgus (무지외반증 치료에서 근위 중족골 절골술과 원위 연부조직 교정술 후 종자골의 교정정도)

  • Jung, Hwa-Jae;Shin, Hun-Kyu;Chang, Il-Sung;Lee, Jong-Keun
    • Journal of Korean Foot and Ankle Society
    • /
    • v.9 no.1
    • /
    • pp.74-80
    • /
    • 2005
  • Purpose: A retrospective review of the radiographs of the proximal metatarsal osteotomy and distal soft tissue procedure for hallux valgus, evaluating the correction of the tibial sesamoid, was undertaken. We evaluated the correlation between the reduction of the tibial sesamoid and the clinical outcomes. Materials and Methods: 17 patients (23 cases) with moderate to severe hallux valgus deformity underwent the proximal metatarsal osteotomy and distal soft tissue procedure. The preoperative and last follow-up radiographs were reviewed according to the tibial sesamoid grade classification recommended by the Research Committee of the American Orthopedic Foot and Ankle Society (AOFAS). We divided them into two groups according to the reduction of the tibial sesamoid. We anaylyzed the clinical outcomes in each group according to Mayo Clinic Forefoot Scoring System (FFSS). Results: In all of the patients, the preoperative tibial sesamoid position were grade 2 or greater. At the last follow-up, 52% (n=12) were grade 1 or less (Group I) and 48% (n=11) were grade 2 or greater (Group II). In group I, the forefoot score was improved from preoperative mean value of 32.0 points to final follow-up value of 66.3 points. In group II, the forefoot score was improved from preoperative mean value of 31.7 points to final follow-up value of 65.9 points. There was no statistical significance between postoperative, average scores in group I and II (p>0.05). Conclusion: The position of the tibial sesamoid was corrected insufficiently in almost half of all cases. In view of clinical outcomes, there was no significant difference between the corrected group and the other group.

  • PDF

Development of a Wall-climbing Welding Robot for Draft Mark on the Curved Surface (선수미 흘수마크 용접을 위한 벽면이동로봇 개발)

  • Lee, Jae-Chang;Kim, Ho-Gu;Kim, Se-Hwan;Ryu, Sin-Wook
    • Special Issue of the Society of Naval Architects of Korea
    • /
    • 2006.09a
    • /
    • pp.112-121
    • /
    • 2006
  • The vertical displacement of a ship on the basis of the sea level is an important parameter for its stability and control. To indicate the displacement on operating conditions, "draft marks" are carved on the hull of the ship in various ways. One of the methods is welding. The position, shape and size of the marks are specified on the shipbuilding rules by classification societies to be checked by shipbuilders. In most cases, high-skilled workers do the welding along the drawing for the marks and welding bead becomes the marks. But the inaccuracies due to human errors and high labor cost increase the needs for automating the work process of the draft marks. In the preceding work, an indoor robot was developed for automatic marking system on flat surfaces and the work proved that the robot welding was more effective and accurate than manual welding. However, many parts of the hull structure constructed at the outdoor are cowed shapes, which is beyond the capability of the robot developed for the indoor works on the flat surface. The marking on the curved steel surface requiring the 25m elevations is one of the main challenges to the conventional robots. In the present paper, the robot capable of climbing vertical curved steel surfaces and performing the welding at the marked position by effectively solving the problems mentioned earlier is presented.

  • PDF

Case Report of Physical Therapy using Proprioceptive Neuromuscular Facilitation for Activity Improvement in a Patient with Parkinson's Disease (파킨슨 환자의 활동 개선을 위한 PNF 개념을 이용한 물리치료 사례보고)

  • Shin, Jae-Wook;Kim, Jwa-Jun
    • PNF and Movement
    • /
    • v.14 no.3
    • /
    • pp.219-229
    • /
    • 2016
  • Purpose: Patients with Parkinson's disease suffer many restrictions in daily life. This case report investigated how intervention with proprioceptive neuromuscular facilitation (PNF)-based physical therapy can affect the activities of Parkinson's patients. Methods: The subject was a 67-year-old female patient diagnosed with Parkinson's disease 3 years ago. Since the last five months, overall activities have become difficult for her, and she finally visited a hospital to take outpatient physical therapy because of the gait difficulties she suffered. The patient's medical history, system review, body structure and function, and activities were evaluated. The patient had difficulties in activities such as lying down, sitting, standing, maintaining a standing position, and walking. The PNF-based intervention was used for treating the impairments and improving the activities. The intervention was performed for 30 min a day, three times a week, for eight weeks. The qualifier of the international classification of functioning, disability, and health was used to measure the result, and the measurement was conducted before and after the intervention for eight weeks. Results: According to the result, the scores for maintaining a standing position, moving around within the home, and going to the toilet improved to "no problem" from "moderate problem." The scores for shifting the body's center of gravity, walking short distances, and washing oneself improved from "moderate problem" to "mild problem." The scores for sitting and standing improved to "no problem" and "mild problem" from "complete problem." The scores for preparing meals and doing housework improved from "severe problems" to "mild problem" or "moderate problem." The scores for walking long distances, moving around outside the home and other buildings, and using transportation did not show significant changes. Conclusion: Intervention with PNF-based physical therapy improved the activity of patients with Parkinson's disease, thus proving its effectiveness. The case report suggested that a therapist can use PNF as a physical therapy intervention for patients with Parkinson's who suffered restrictions in daily activities.

THE STUDY OF THE EFFECT OF DENTAL ARCH FORM ON CHEWING MOVEMENT III. THE RELATIONSHIP BETWEEN THE DENIAL ARCH FORM AND THE CHEWING MOVEMENT (저작운동에 미치는 치열궁형태의 영향에 관한 연구 III. 치열궁형태와 저작운동과의 관련성에 대하여)

  • Jo Byung-Woan;Kim Jong-Pil;Chang Heun-Soo;Aha Sang-Hun;Ahn Jae-Jin
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.32 no.4
    • /
    • pp.565-572
    • /
    • 1994
  • According to the classification of dental arch form and the analysis of patterns of chewing movement, the patterns of chewing movement in each group were evaluated and compared with those of the normal group. Results were summarized as follows ; 1. Opening phase in chewing movement In the group which the maxillary second molar positionsbuccal side, the chewing patterns which have the Vertical Guide Openings in frontal plane, the Posterior Guide Openings in hjorizontal plane were observed. In the group which the maxillary premolars position lingual side, the chewing paterns which have the Protrusive Shift Openings in horizontal plane and sagittal plane were observed. 2. Closing phase in chewing movement. In each group except for the normal group, the chewing patterns which have the Concave Closure in frontal plane and in Horizontal plane were observed. In the group which the maxillary premolars position buccal side, the chewing patterns which have the Lateral Guide Closure in frontal plane and in horizontal plane, the Vertical Guide Closre in sagittal plane were observed: From the results, as the characteristics of the dental arch form have appeared in chewing movement, the close relationships were found between dental arch form and chewing movement. It is suggested that the evaluation of dental arch form is effective in the diagnosis of function of stomatognathic system.

  • PDF

Real-Time Textile Dimension Inspection System Using Zone-Crossing Method, Distortion Angle Classifier and Gray-Level Co-occurrence Matrix Features (영역교차법, 왜곡각 분류자 및 명암도 상관행렬 특징자를 이용한 실시간 섬유 성량 검사 시스템)

  • 이응주;이철희
    • Journal of Korea Multimedia Society
    • /
    • v.3 no.2
    • /
    • pp.112-120
    • /
    • 2000
  • In this paper, we implement a real-time textile dimension inspection system. It can detect various types of real defects which determine the quality of fabric product, defect positions of textile, classify the distortion angel of moving textile and the density. In the implemented system, we measure the density of textile using zone-crossing method with optical lens to solve the noise and real-time problems. And we compensate distortion angel of textile with the classification of distortion types using gaussian gradient and mean gradient features. And also, it detecs real defects of textile and its positions using gray level co-occurrence matrix features. The implemented texile demension inspection systemcan inspect textile dimensions such as density, distortion angle, defect of textile and defect position at real-time. In the implemented proposed texitile dimension inspection system, It is possible to calculate density and detect default of textile at real-time dimension inspection system, it is possible to calculate density and detect default of textile at textile states throughout at all the significant working process such as dyeing, manufacturing, and other texitle processing.

  • PDF

The Study of Classification Body Types of Adults Women and Drawing of Prototype of Clothing (성인여성의 의복 원형 개발에 관한 연구 -성인여성의 체형 분류에 관한 연구의 후속 연구-)

  • 손혜순;손혜정
    • The Research Journal of the Costume Culture
    • /
    • v.5 no.4
    • /
    • pp.130-158
    • /
    • 1997
  • This study outputs calculation of regression of each items for production of torso basic pattern according to 6 body types as the result of another study and intends to present drawing method of torso model by short measure method modified and supplied and supplied by experiments of wearing clothing. SAS(Statistical Analysis System) is used for figures management and methods for analysis used are Frequency Analysis, Means Analysis, Regression Analysis, Correlation Analysis, etc. Results are as follows. 1. Correlation analysis is used to output the size necessary for torso prototype drawing by sort measure method and waist front length, back length, crotch length, shoulder point-cerricale-shoulder point, bust circumference, waist circumference, weight, etc, are set up as representative items calculation of regression of each type is suggested. 2. In the result of experiment of the first wearing clothing intended for 5 in each type and the whole 30, to develop torso prototype drawing method by short measure method, as we find some problems of the shape and propriety of neck root circumference line, the position of shoulder point, pulling or hold armpit parts, waist circumference line, the degree of dissatisfaction is high, so the second experiment of wearing clothing is propriety of each part is improved, all items except the length and quantity of shoulder dart, waist in back bodice, clearance quantity of hip circumference, and the place of shoulder line in side bodice. So, it was modifed and supplied and then the third torso prototyped drawing method by shout measure method was suggested. The third prototype drawing method was suggested, by modifying and supplying.

  • PDF

A Study on the Conceptualization of the Meaning of Well-being and Welfare of Home as a Purpose of Home Economics (가정학이 퇴구하는 가정의 안녕과 복지의 개념에 대한연구 :비판이론을 중심으로)

  • 김양희
    • Journal of Families and Better Life
    • /
    • v.15 no.2
    • /
    • pp.185-200
    • /
    • 1997
  • In this study the meaning of well-being and welfare of home has been analyzed and a new direction in which home economics should advance has been suggested, This study not only would help the characteristics of home economics be properly understood and its displinary position take its own place but also a conceptual analysis which might be uncommon in the studies of learned circles of Korean home economics would be a basis for establishing the uniqueness of the discipline named by home economics. Based on the critical theory of Habermas it has been demonstrated that well-being and welfare of home have been emphasized unfairly in the physical and technical aspects and such a partial pursuit of positivism and purposive rationality of scientific technology has resulted in the situation that home would be gradually encroached and controlled by the social system pursuing purposive rationality. As an alternative to overcome this kind of problems communicative rationality that has em hasis on the process of intersubjective understanding and agreement has been focused. The meaning of well-being and welfare of home has been established through the classification of family life actions in to technical action practical action and emancipatory action, And the characteristics of them have been examined and ideal directionns of each element have been discussed.

  • PDF

Spatial Analysis of White-naped Crane(Grus vipio) Habitats in the Han-River Estuary with GIS application (GIS를 이용한 재두루미의 한강 하구 서식지 이용에 대한 공간 분석)

  • Kim, Sung Ok;Lee, Sang Don
    • Journal of Wetlands Research
    • /
    • v.10 no.2
    • /
    • pp.173-178
    • /
    • 2008
  • The habitat composition in the Han-river estuary, where white-naped crane(Grus vipio; endangered migrating bird) spend winter, was analysed by the geographic information system(GIS). And the habitat use pattern of white-naped crane collected by satellite tracking method was analysed. The % composition of seven habitat categories of land cover classification was compared for the buffers of radii 100 m, 200 m, 500 m, and 1 km, respectively, around the white-naped crane position point(n=228), and the statistical analysis was done using chi-square test. The results showed no selective use of habitat area by white-naped crane in the buffers of 100 m, 200 m and 500 m, but showed clear selection of habitat use (p < 0.05) in the case of 1 km buffer.

  • PDF