• 대한정형도수물리치료학회지
• /
• 제20권1호
• /
• pp.1-7
• /
• 2014

Background: As the increase of forward head position, we studied the change of thickness of deep cervical flexor (DCF) compared of with sternocleidomastoid (SCM). we measured and analysed the change of thickness of the neck flexor for forward head position and cranio-cervical flexion exercise (CCFE). Methods: Using a cross-sectional design, we conducted the study selecting 35 healthy adults (12 males, 23 females). We measured the craniovertebral angle (CVA), instructed them to perform the CCFE, and measured the DCF and SCM using ultrasonography during the contraction and relaxation period. Results: Intra-reliability of SCM is .96, longus capitis is .92 and longus coli is .97. we compared according to the change of forward head position, Correlation of DCF is .841, and DCF/SCM is .754 by significant positive correlation. At the comparison of CCFE and Resting muscle thickness, SCM and DCF is .00, DCF/SCM is .68. Conclusion: There is a strong positive correlation between the change amount of DCF and DCF/SCM as the increase of CVA.

• The Journal of Korean Physical Therapy
• /
• 제31권3호
• /
• pp.151-156
• /
• 2019

Purpose: This study aimed to investigate the immediate effects of posture correction and real-time visual feedback using a video display on muscle activity and change of head position during overhead arm lift test in individuals with forward head posture. Methods: Fifteen subjects with forward head posture and fifteen normal subjects who volunteered were included in this study. During both groups performed the overhead arm lift test, the muscle activity of the upper trapezius, serratus anterior, sternocleidomastoid, and lower trapezius muscle were measured using electromyography, and head position change was measured using photographs. Then, forward head posture group was asked to perform overhead arm lift test again after posture correction and real-time visual feedback using a video display respectively. One-way analysis of variance (ANOVA) was used to analyze four conditions: pre-test, posture correction, real-time visual feedback, and the control group. Results: The upper trapezius and lower trapezius muscle activity significantly decreased posture correction, real-time visual feedback, and control group than pre-test of forward head posture group (p<0.05). The sternocleidomastoid muscle significantly decreased real-time visual feedback and control group than pre-test of forward head posture group. Head position change significantly decreased three conditions than pre-test of forward head posture group and real-time visual feedback and control group significantly decreased than posture correction. Conclusion: This study recommend for maintaining cervical stability during the overhead arm lift test, postural control using real-time visual feedback is more effective in subjects with forward head posture.

• 한국인터넷방송통신학회논문지
• /
• 제20권6호
• /
• pp.129-135
• /
• 2020

본 연구는 10MHz SC-CUT 크리스탈을 이용한 오븐제어수정발진기(이하 OCXO)의 온도센서 위치에 의한 특성 변화와 주파수 보정방법에 관한 것이다. 기존의 고정밀 10MHz OCXO의 제작 방법은 여러 가지가 있지만, 본 연구에서는 온도센서의 위치를 조정하는 것만으로도 외부 온도 변화에 대한 주파수 안정도 특성이 향상될 수 있다는 것을 보여준다. OCXO의 주파수 특성에 영향을 주는 인자로는 크리스탈에 전달되는 온도, 크리스탈에 인가되는 전압, 발진회로를 구성하는 캐패시턴트 등이 있다. 이러한 인자들에 의한 주파수 변화량을 측정하고 온도 변곡점 측정과 캐패시터 값의 변화를 통하여 OCXO 출력주파수의 보정값 변화를 알아보았다.

• 한국진공학회지
• /
• 제20권1호
• /
• pp.1-6
• /
• 2011

포항광가속기의 섹터 진공용기에 부착된 빔위치측정기의 수직방향 위치 읽음 값이 갑자기 변하는 오류가 관찰되었다. 이 오류의 원인을 알기 위해서 섹터 진공용기의 양 끝단에 있는 빔위치측정기의 전극을 통한 고주파전달 산란계수를 측정하였다. 급한 변화를 보이는 섹터 진공용기에서는 측정한 산란계수의 첨단 값이 빔위치측정기의 작동 주파수 내에 존재함을 확인하였고, 전산시늉을 통해 빔위치측정기의 작동 주파수내 첨단 주파수가 가로 전장 모드의 공진모드와 일치함을 확인하였다.

• 대한물리치료과학회지
• /
• 제1권1호
• /
• pp.175-185
• /
• 1994

The purpose of this study was to evaluate and compare the biceps muscles activity at the different angle and direction of the base of support on sitting position in hemiplegic patients. The biceps muscles activity was measured at the $0^{\circ},\;10^{\circ}$ of posterior tilt, $10^{\circ}$ of anterior tilt, $10^{\circ}$ of affected side tilt and $10^{\circ}$ of sound side tilt of the base of support by EMG biofeedback (MYOMED 432. ENLAF NONIUS CO.) In this study, 24 out-patients were evaluated who were treated at Yonsei University Medical College Rhabilitation Hospital. This study was carried out from December 5. 1993 to March 30. 1994. In order to determine the statistical significance of result, the ANOVA, and t-test were applied at the 0.05 level of significance. The results were as follows : 1. The biceps muscles activity of the sound side was no significantly difference at the different angle and direction of the base of support on sitting position(p>0.05). 2. The biceps muscles activity of the affected side was significantly increased at the 100 of sound side tilt and $10^{\circ}$ of posterior tilt of the base of support on sitting position(p<0.05). 3. There was no significantly difference in the change of the biceps muscles activity of the affected side between the affected group and the intact group of propriocetive sense(p>0.05). 4. The change of the biceps muscles activity of the affected side was significantly higer in the group of G 2 spasticity compared to that of G 1, G 1+ spasticity(p<0.05). These results showed that the biceps muscles activity of affected side was significantly increased when the base of support was tilted toward the sounde side and posterior direction on sitting position. In order to prevent the increment of biceps muscle activity, the patients must avoid to sit toward sound side and posterior tilt.

• 기본간호학회지
• /
• 제21권3호
• /
• pp.226-234
• /
• 2014

Purpose: This study was done to present guidelines for deciding appropriate times for measuring blood pressure (BP) in patients with neurological disorders who had surgery due to brain damage. Method: It was a repeated measures-experimental research on time variants in BP after nursing care. SBP (Systolic BP) and DBP (Diastolic) were measured every 2 minutes up to 5 times using an EKG patient monitor. Measured data were analyzed using repeated measures ANOVA and paired t-test. Results: For suctioning, there were significantly higher differences for SBP averages after 2 min. (138mmHg, p<0.01) and 4 min. (133mmHg, p<0.01) compared to before suctioning (120mmHg). For position change, there were significant differences in SBP averages after 2 min. (136mmHg, p<0.01) and 4 min. (130mmHg, p=0.01) compared to before changing position (121mmHg). For position change followed by suctioning there were significant differences in SBP averages after 2 min. (136mmHg, p<0.01), 4 min. (136mmHg, p<0.01) and 6 min. (125mmHg, p=0.003) compared to before the interventions (121mmHg). Conclusions: Results indicate that there are significant differences in SBP and DBP over time during nursing interventions, suggesting clinical measurement of BP after 6 min. or 8 min. be done for patients with neurological disorders in neurosurgery clinics.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1381-1384
• /
• 2005

In these days, the piezoresistive material has been applied to various sensors in order to measure the change of physical quantities. But the relationship between the sensitivity of a sensor and the position and size of piezoresistor has rarely been studied. Therefore, this paper was focused on the distribution of the resistance change ratio on the diaphragm and bridge surface where piezoresistor would be formed, and proposed the proper size and position of piezoresistor with which the sensitivity of sensor was increased. As the width of mass and boss was increased, the distance between piezoresistors was closed and the maximum value of resistance change ratio was decreased by the increase of the structure stiffness. And according to the increment of seismic mass size, the value of resistance change ratio is decreased by increase of the structure stiffness. Y directional piezoresistor is formed in the position of $100\mu{m}\;apart\;from\;cantilever\;edge\;and\;length\;of\;that\;is\;800\mu{m}$.

• 동력기계공학회지
• /
• 제4권2호
• /
• pp.58-64
• /
• 2000

A method for the position control of a pneumatic cylinder using a linearized controller is proposed. Pneumatic cylinder has highly nonlinear characteristics and modelling of the system has been difficult. Compliance of the pneumatic cylinder is materially changed according to the operating position. So, in the case that fixed gain controller obtained by a linearized model at a specified position is used, response of the cylinder should be changed according to the operating position. In order to get a designed results regardless of operating positions, a controller for compensation of the nonlinear characteristic with a linearlization compensator is designed and simulation results show that this method is appropriate for the control object.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.263-266
• /
• 1987

Generally an incandescent lamp is made in the bulb with a horizontal position filament. In this paper the position of filament was changed Into a vortical position. When the position of filament is changed into a vertical position, efficacy is increased and color rendering is somewhat improved. In this subject the heat loss by a filling gas is important. The heat loss by a filling gas was calculated theoretically. The results in an Incandescent lamp experiment can be analyzed through the heat loss by a filling gas. As a filling gas the mixture of argon and nitrogen is used. The variation of lamp characteristics by the shape of filament rill be considered. The change by filament position to a vortical position is required in the field of power consumption saving of lighting system.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 춘계학술대회
• /
• pp.267-268
• /
• 2017

본 논문에서는 어레이 형태로 제작된 압력센서(FSR402)를 이용하여 누워있는 환자의 자세를 판별하였고, air cylinder를 릴레이보드로 제어하여 실린더 상단에 연결된 침대를 상승, 하강 할 수 있도록 하여 환자의 자세를 변화 시켜 수면 중 환자의 자세를 변환 시켜 폐쇄성 수면 무호흡 치료에 도움을 줄 수 있는 시스템을 개발하였다.