• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.295-295
• /
• 2000

In this paper, the measurement algorithm of PCB alignment error is developed using image processing. The X-Y-$\theta$ table correcting PCB alignment error is driven by drive module based on microprocessor according to calculation results obtained through image processing procedure. In order to recognize the X-Y-$\theta$ position errors, two fiducial points are marked on PCB and two cameras of ultraviolet rays types are used for detection of the points to capture exactly fiducial points under disturbance of illumination change. Through application for a practical screen printer, the precision control using the developed position control system can be realized about 2.5${\mu}{\textrm}{m}$ in table moving range and 8${\mu}{\textrm}{m}$ in camera processing precision.

• Physical Therapy Korea
• /
• v.5 no.3
• /
• pp.48-55
• /
• 1998

The purpose of this study was to identify vital capacity (VC) in relation to the changing position of 19 patients with spinal cord injury (SCI) and 20 normal controls. Among the 19 SCI patients, there were 9 quadriplegics and 10 paraplegics. The vital capacity was measured in each subject during sitting, standing, lying, and head down position of 30 degrees. The data were analysed by the Kruskal-Wallis test, Mann-Whitney test, and Wilcoxon signed rank test. For the SCI, significant difference of VC accoring to the 4 positions between quadriplegics and paraplegics. In the control group, significant difference of VC according to the 4 positions. In 4 positions the VC of men were significantly larger than that of women between two groups. No statistical significant difference was shown in VC by the postural change between quadriplegics and paraplegics.

• Archives of Pharmacal Research
• /
• v.20 no.3
• /
• pp.283-287
• /
• 1997

In order to identify the structural requirement at 4-position of 1-arylsulfonyl-4-phenyl-4,5-dihydro-2-limidazolones 3 for their cytotoxicity, the corresponding 1-arylsulfonyl-4-cyclohexyl-4,5-dihydro-2-imidazolones 4 were synthesized and their in vitro cytotoxicity against human solid tumor cell lines were measured. Unlike compounds 3a-c, cyclohexyl analogues 4a-c do not show the cytotoxicity. This dramatic loss of activity of these analogues on the volume change with the bulkier cyclohexyl group indicates that the planar structure at 4-position of 1-arylsulfonyl-4-pheny-4,5-dihydro-2-limidazolones 3 is required for their activity as an important pharmacophoric moiety.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.199-204
• /
• 2006

In this paper, we propose an adaptive control algorithm to improve the position accuracy and reduce the nonlinear friction effects for linear motion servo system. Especially, the considered system includes not only the variation of the mass of the mover but also the friction change by the normal force. To adapt to these problems, we designed the controller with the mass estimator and the compensator by observing the variation of normal force. Finally, the numerical simulation results are presented in order to show the effectiveness of the proposed method to improve the position accuracy compared to other control methods.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.1
• /
• pp.60-66
• /
• 1996

Brushless DC(BLDC) motor have been increasingly used in machine tools and robotics applications due to the reliability and the efficiency. In control of BLDC motor, it is important to construct the controller which is robust to parameter variations and external disturbances. Variable structure controller(VSC) has been known as a powerful tool in robust control of time varying systems. In practical systems, however, VSC has a high frequency chattering which deteriorates system performances. In this paper, a binary controller(BC) which takes the form of VSC and MRAC combined is presented to solve this problem. BC consists of the primary loop controller and the external loop controller to change the gain of primary loop controller smoothly. So it can generate the continuous control input and is insensitive to parameter variations in the given domain. To confirm the validity, various investigations of control characteristics for various design parameters in a position control system of BLDC motor are carried out. (author). 11 refs., 18 figs., 1 tab.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.53 no.2
• /
• pp.51-57
• /
• 2004

Vector control schemes are used in inverter-fed induction motor drives to obtain high performance. Crucial to the success of the vector control scheme is the knowledge of the instantaneous position of the rotor flux. However, the position of the rotor flux change with temperature and magnetic saturation of the motor. This variation cause deterioration of both steady state and dynamic operation of the motor drives. Performance degradation is in the form of input-output torque nonlinearity and saturation of the motor. Analytic expressions are derived to evaluate the effects due to parameter sensitivity. Also, dynamic response is shown by speed command with the variation of stator and rotor resistance.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.1
• /
• pp.19-26
• /
• 2007

This paper presents a precision position control of induction motor using disturbance observer to reduce disturbance effects. It shows that proposed algorithm is strong in induction motor precision control for disturbance change. This system with disturbance observer using deadbeat control, which has high benefit, is good for quick disturbance compensation. To show this effectiveness the whole process is simulated by simulink, and also experimented by DSP6416 with TCP-IP network board.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.2
• /
• pp.103-108
• /
• 2005

Loading/Unloading task in the real industry is performed by crane, but most of the loading/unloading task with the weight of 5kg∼30kg is done by human workers and this kind of work causes industrial disaster of workers. Therefore it is necessary to develop low cost loading/unloading manipulator system to prevent this kind of industrial accidents. This paper is concerned with the design and fabrication of 2 axis pneumatic manipulators using on/off solenoid valves and accurate position control without respect to the external load and low damping in the pneumatic rotary actuator. To overcome the change of external load, switching of control parameter using LVQNN (Learning Vector Quantization Neural Network) is newly applied, which estimates the external loads in the pneumatic cylinder. As an underlying controller, a state feedback controller using position, velocity and acceleration is applied to the switching control system. The effectiveness of the proposed control algorithms are demonstrated through experiments of pneumatic cylinder with various loads.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.191-196
• /
• 2004

This study proposed the analysis of mass position detection and modified stiffness due to the change of the mass and stiffness of structure by using the original and modified dynamic characteristics. The method is applied to examples of a cantilever and 3 degree of freedom by modifying the mass. The predicted detection of mass positions and magnitudes are in good agrement with these from the structural reanalysis using the modified mass.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1257-1260
• /
• 1996

This paper describes a fully digitalized driver for BLDC motors and the driver is realized by a single chip microprocessor. The speed change can be done by using the signal obtained from the position detecting sensor and adjusting the pulse width at the input channel of power module. In order to verify the effectiveness, an repetitive control method is adopted in the speed control tracking a periodic reference change in the BLDC motor system. The experimental results are shown for the reference tracking accurately according to the design parameter variation in the repetitive controller design.