• The KSFM Journal of Fluid Machinery
• /
• v.19 no.1
• /
• pp.5-10
• /
• 2016

As a key component of a Francis turbine facility, the runner performance plays a vital role in the performance of the turbine. It is effective and successful to design a Francis turbine runner blade with good performance by one dimensional hydraulic design method. On the basis of one dimensional hydraulic analysis, there are a lot of parameters of the internal flow passage shapes determined by experience. Among those parameters, the effect of port area of blade on the performance of a Francis turbine is investigated in this study. A given Francis turbine model was selected for investigating the port area of blade on the performance. The result shows that the effect of port area of runner blade on the outflow angle from runner passage on the performance is quite significant. A correct exit flow angle reduces the energy loss at draft tube, which has the best efficiency of the turbine model.

• Journal of Fisheries and Marine Sciences Education
• /
• v.24 no.6
• /
• pp.872-883
• /
• 2012

Generally the determination of turning basin for vessels of entering & sailing in the berth has been considered in the design standard of harbor construction rules of the port. In this regard, the turning basin has been determined by the max size of entering vessel of the berth/port. But the size of turning basin may considered the ship's maneuvering ability, operator's skillful power, mooring equipments of the berth, arrangement of the fairway and the environment condition of weather & seas around the designated port area. So this paper suggested the optimum size of turning basin after studying the harbour design rules of the advanced marine countries and using by maneuvering simulator for turning basin size and also evaluated the design standard of harbor construction rules and minimum size of turning basin against ship's length at the Gangjung civil/naval port of Jeju Island.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.5
• /
• pp.819-826
• /
• 2022

Recently, interest in smart port systems for linking with autonomous ships is increasing. To build a smart port system, primarily, a system that can automatically moor a vessel is required. To calculate the allowable mooring capacity of the automatic mooring system in a port, the characteristics of the vessel must be considered, and the external force generated from environmental disturbances in the sea must be accurately calculated. Accurately estimating the magnitude of these environmental disturbances is an extremely important factor for designing an automatic mooring system. In this study, the mooring capacity of the HANBADA was estimated according to the port and fishing port design criteria of the Ministry of Ocean and Fisheries. The longitudinal and lateral forces of the mooring force acting on the HANBADA were 18 kN and 248 kN, respectively, under the most extreme ocean conditions (BF 6).

• Journal of the Korean Geotechnical Society
• /
• v.37 no.5
• /
• pp.33-46
• /
• 2021

After the Gyeongju earthquake, which was the largest in the history of measuring instruments in Korea in 2016, and after the Pohang earthquake, where the pillars of pallet structures were destroyed in 2017, the seismic design standards for all domestic facilities have been revised and supplemented. In particular, during the investigation of the Pohang Earthquake damage cases, liquefaction damage that occurs mainly in countries with strong earthquakes such as the United States, Japan, and New Zealand was found, so studies are being conducted in depth to improve seismic design standards. In this study, the liquefaction potential assessment in the recently revised seismic design standard for port and harbor was reviewed, and an applicability review was conducted focusing on the newly cited liquefaction potential index (LPI). At this time, by varying the thickness and location of the sandy soil where liquefaction can occur, the LPIs for various cases were calculated and compared. Also, 22 LPI values in the practical port area were compared and reviewed along with performance of the liquefaction assessment based on the site response analysis using the boring-hole data of the actual 22 port sites.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.253-258
• /
• 2000

Recently, the area of design optimization, especially structural optimization, has been and to be a continuous active area of research. And the design optimizations of port facilities have been achieved by many other civil engineers. But the design optimization of port facilities were limited to the design optimization of the breasting dolphin. This paper invested the design optimization of mooring pier and the foundations of mooring pier was suggested considering the convenience of repair and reinforcement work. The mooring pier devised with prestressed precast concrete panel and rigid frame welded wide flange beam to steel pipe pile. To accomplish the design optimization of mooring pier, the Augmented Lagrangian Multiplier Method(ALM) of ADS(Garret N. Vanderplaats) optimization routine, BFGS method as optimizer and Golden Section Method as one dimensional search were utilized. As a result, thirty percent of material cost for construction was reduced by design optimization. The tensile stress of concrete panel and bottom flage was critical constraints under service load. So, using high strength concrete and steel will be economical. And lots of initial values must be invested to accomplish the design optimization in design procedures.

• International Journal of Automotive Technology
• /
• v.5 no.1
• /
• pp.9-16
• /
• 2004

An experimental study was carried out to characterize the spray atomization process of micro-machined port fuel injectors with a piezoelectric atomization device, which can generate pressure pulsations through vibration of a piezoelectric transducer. In this study, several types of micro-machined arrays such as 30∼200-microns of hole arrays were tested. Both a dual-stream and a central-port injectors with micro-machined arrays were tested and compared with normal port fuel injectors. The spray visualization was conducted to characterize overall spray structure and phase Doppler particle analyzer (PDPA) system was used to quantify the droplet size and velocity. In addition, the pressure history was recorded by using digitized signal from pressure transducer. The results showed that modulation is effective to the spray atomization for tested injectors and atomization performance depends on injector design factors, orifice sizes, and frequency and power of the modulator. A number of resonance frequencies of the modulator was modified by injector parameters and temperature. In addition, our results suggested that design of sufficient space among holes is critical to avoid droplet coalescence in the multi-hole micro-machined injectors.

• Journal of Navigation and Port Research
• /
• v.30 no.2
• /
• pp.151-159
• /
• 2006

This study intends to surveyrequirements for port and logistics supply chain management with RFID {Radio Frequency IDentification)technology. Port and logistics supply chain management has become a critical issue due to the necessity of efficiency, visibility, trace-ability, etc. Since the introduction of RFID technology, its performance, reliability, validity, and safety have been a concern in most industries. Particularly, in port and logistics supply chain management, RFID has the potential to track the movement of containers and to provide in-transit visibility toward customers. In thispaper we consider some critical issues related to port and logistics supply chain management, which previously adopted RFID technology. In order to successfully design and adopt RFID technology and utilize it as optimally as is possible in the port and logistics industry, it is necessary to understand the potential of shipping companies and their requirements in adopting RFID technology in port and logistics.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.4
• /
• pp.133-140
• /
• 2018

This study is change of the street space of the port city of Yokohama and the transformation process of the canal. modern port city Yokohama is a region that was responsible for the development of East-West maritime transport routes in Japan in the 17th century and the inland transportation through fishing villages and ports. it has also grown rapidly as a regional port and new port. In particular, through the revitalization of trade between foreign settlements and Japanese residents in the port area, the existing fishing area became a modern port city space. Yokohama went through the following process and grew into a modern port city. The construction of the port harbor and the maintenance of existing logistics functions, the formation of the central horizontal axis through maintenance of the fishing village, the construction of the logistics movement route to the inland area through the construction of the canal, the expansion of the horizon for fire prevention and fire restoration, The formation of a new settlement space according to the movement, the transformation of the existing religious axis by the combination of the elaboration and the introduction of modern transportation, and the spatial connection between the inland cities.

• ETRI Journal
• /
• v.35 no.5
• /
• pp.808-818
• /
• 2013

Programmable memory built-in self-test (PMBIST) is an attractive approach for testing embedded memory. However, the main difficulties of the previous works are the large area overhead and low flexibility. To overcome these problems, a new flexible PMBIST (FPMBIST) architecture that can test both single-port memory and dual-port memory using various test algorithms is proposed. In the FPMBIST, a new instruction set is developed to minimize the FPMBIST area overhead and to maximize the flexibility. In addition, FPMBIST includes a diagnostic scheme that can improve the yield by supporting three types of diagnostic methods for repair and diagnosis. The experiment results show that the proposed FPMBIST has small area overhead despite the fact that it supports various test algorithms, thus having high flexibility.

• The Journal of the Korea Contents Association
• /
• v.6 no.2
• /
• pp.1-8
• /
• 2006

In this paper, we address to develop a port container management system using RFID, which is one of the main technologies in ubiquitous. Our system is designed and implemented based on the following technologies: a port gate automation using RFID for container identification, web programming for both communication of the gate and deposit/delivery of a container, and wireless embedded router technology for both port container network platform and cram terminals. The developed system using RFID will be expected to use in main part of the port logistic management system aimed to the intelligent port.