• 한국항해항만학회지
• /
• 제40권5호
• /
• pp.291-297
• /
• 2016

Ulsan Port is the main port for handling liquid cargo because of natural environmental conditions and the distribution of port infrastructures in Korea. Damage to both liquid cargo vessels and the port structure caused by maritime accidents could have a serious impact on property and human lives as well as the marine environment. For safe navigation, the parties concerned should ensure the suitability of various design criteria at the harbor design stage. In this paper we analyze and compare various domestic and international harbor design criteria, and then apply each criteria to Ulsan port to evaluate its overall safety. Additionally, this paper specifies certain precautions in terms of reviewing a ship's safety for each channel at Ulsan Port, and suggests possible improvements to optimize channel design.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회 3차
• /
• pp.31-36
• /
• 2010

This paper introduces a practical determination method for soil parameters adopted in the new performance based design code for port and harbour facilities in Japan. In the new port-design code, the depth profile of the derived values is modeled as the profile of the estimated values so as to be either the mean value or the regression line, then the correction factors are multiplied to the estimated value according to the coefficient of variation (if COV > 0.1) and the number of the data entries (if n < 10). The new port-design code is applied to the unconfined compression test results for the Hiroshima Port clay in order to evaluate the undrained shear strengths. From the discussion, it is emphasized that not only the statistic treatment but also the engineering judgment are required in the procedure of the soil parameter determination for the reliability design.

• 한국항해항만학회지
• /
• 제45권2호
• /
• pp.42-53
• /
• 2021

The port space can be considered to be the space in which the characteristics of the port city are best expressed. Also, since it acts as a representative gateway along with the airport, it can have a direct impact on the image of the region and country. However, the harbor hinterland has been a refuge during the war in the past, and it has been concentrating on development related to the port industry; hence, it has a poorer residential environment. Therefore, in this study, in order to ensure equal development in space and equal access to basic urban services, urban design directions were suggested for the harbor hinterland based on the concept of an inclusive city'. To this end, through factor analysis, urban planning elements that can be applied to urban design were derived, and through PLS(Partial Least Square)regression analysis, based on the opinions of residents and experts, urban design directions for the port hinterland were presented. The study site was Gamcheon Port, one of the Busan Ports in Korea, the hinterland of Gamcheon Port was a high slope, and the residential environment was relatively poor due to the dense concentration of older residential areas.

• 대한기계학회논문집B
• /
• 제28권4호
• /
• pp.406-414
• /
• 2004

In Gerotor pump, the pressure pulsations which occur due to the pump geometry result in vibration and noise of pump elements as well as cavitation in hydraulic system when the chambers of gerotor enter the delivery port and leave the suction port. Therefore it is important to study on the pressure pulsations before design and analysis of characteristics in Gerotor pump. In this paper, to reduce the unnecessary pressure pulsations, the port plate of Gerotor pump is designed based on the notch of the vane pumps and the relief grove of the piston pumps. The theoretical analysis of the pressure pulsations is performed in consideration of design parameters of the port plate which include each port positions and groove width and operating conditions which include rotational velocity and delivery pressure.

• 한국자동차공학회논문집
• /
• 제14권5호
• /
• pp.121-129
• /
• 2006

An Intake Port of SI engines plays a key role on improving engine performance by maximizing full load volumetric efficiency or by optimizing in-cylinder air motion. However, designing an intake port has been usually performed based on port experts' experience and know-how, which means that analytical analyses are relatively insufficient. In this paper, port design parameters which decide an overall port shape were defined in order to correlate them relevantly with flow test results accumulated so far. Test species were composed of all twenty eight SI engines which cover major engine displacements from 1,000cc to 4,000cc. First, they were tested on a steady state flow test rig to find out their flow coefficients. Secondly, those flow coefficients were analyzed based on the port design parameters measured from the engines. The most effective parameters were port height, valve head diameter, and the ratio of port size and cylinder bore diameter. The final correlation equation could predict flow coefficients within 2% deviation.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 Asia Navigation Conference
• /
• pp.230-239
• /
• 2006

The depth, width and alignment of fairway that are main port water facilities should be designed considering the various elements including particulars of design ships, weather and sea conditions around fairway and method of ship-handling. However not only the existing Japanese design standard for fairway and also those of other countries do not take into consideration of such kind of elements and no design standard is made by quantitative analysis. In this circumstance the new design standard (Approach Channels, A Guide for Design) depending on classified various elements and quantitative analysis was proposed in 1997 by PIANC and IAPH. But it was proved that calculated values according to this standard were unfounded and had some problems to output the discontinuous value by small difference of calculation condition because the each value fur each element was simply added. And also it is hard to apply this standard to the design of port water facilities in Japan because this [A Guide for Design] is the design standard for long channels in European port. The proposal of more reasonable Japanese standard will be expected by applying the study result of naval architecture and navigation and by the cooperation of ship operators to use fairway, naval architects to built ships and civil engineers to dredge fairway. The concept of a fairway in 'Design standard fur fairway in next generation' is defined as passage for approach channel) and traffic lane designated by light buoys as navigable water for safe navigation. In 'Design standard for fairway in next generation' depth, width and alignment are picked up among many design elements of a fairway. Design method for those elements is shown based on design ships and navigational environments. This standard shows the method of design for each dimension depending on characteristic on design ship and weather and sea condition. On the other hand, in case of existing fairway, it is possible to decide the size of ship and navigation criteria by opposite analysis.

• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 2001년도 Bulletin of The 5th Asian Design Conference International Symposium on Design Science
• /
• pp.50.1-50
• /
• 2001

• 해양환경안전학회지
• /
• 제25권3호
• /
• pp.251-258
• /
• 2019

This study was conducted to propose an effective port operation method in terms of the design capacity of waiting anchorage by comparing the ratio and the number of waiting anchorage according to the port operation method of Busan New Port. For this, the Arena simulation program compared the rates of waiting vessels according to the application of the multi-user terminal, liner terminal and hybrid liner terminal operation methods. As a result, analysis suggested the necessary anchorage space can be reduced to about 18 % when using the multi-user terminal operation method and about 15.6 % when using the hybrid liner terminal operation method, as compared with the liner terminal operation method. Specifically, it was effective to apply the multi-user terminal operation method in terms of the anchorage capacity to be designated to Busan New Port. This study can apply to the designation of the new anchorage in the Busan New Port by reflecting the contents of the design of the anchorage in accordance with the port operation method.

• 한국위성정보통신학회논문지
• /
• 제4권2호
• /
• pp.52-56
• /
• 2009

본 논문에서는 그린 함수(Green's function) 방법을 이용하여 하나의 페라이트 디스크를 사용하는 4 단자 스트립라인 서큘레이터 설계 방법을 제안한다. 통신 시스템 설계의 유연성을 높일 수 있는 4 단자 서큘레이터는 이제까지 2개의 3 단자 서큘레이터를 연결하여 사용하고 있다. 이를 하나의 페라이트 디스크를 사용하는 4 단자 서큘레이터로 대체하면 무게와 부피를 감소시킬 수 있어서 위성용으로 장점을 갖는다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1994년도 가을 학술발표회 논문집
• /
• pp.79-86
• /
• 1994

These days much efforts have made all over the world in order to develop the integrated optimum structural design system that performs automated design process composed of the analysis, optimum design, drafting, and reporting. However, these types of design systems oriented extensively to port structures are rarely found. In this paper, the integrated optimun design system applied to gravity type port structures such as quay walls and breakwaters will be briefly presented. Highly sophiscated facilities necessary in optimum structural design including analysis and optimization are integrated into one system. Several types of gravity type port structures can be designed using this system. The application to the real ports and the efficiency of this system will be finally shown.