• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.141-146
• /
• 2005

Recently, the accidents on the sea have arisen due to the increase of the nautical traffic and the digitization of equipments for marine. Therefore, IMO(International Maritime Organization) have provided the recommendation of EMI and EMS for radio communication and equipments of marine from SOLAS cobvention at July 1st 2002. In this paper, we measured EMC environment on the HANBADA, which is Korea Maritime University training ship, for basic EMC environment of a ship. The measuring point was Bridge and Engine Control Room of the ship, we measured the test point that was set at random. Measured Band is from 30 MHz to 2 GHz, polarization measurement is processed both vertical and horizontal polarizaion. We analysed the results in consideration of permissible criteria.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.77-83
• /
• 2005

In collision avoidance problem of a ship, collision risk model is usually set up using the interview results fron experts who sit on a simulator by varying parameters, in which DCPA and TCPA are commonly used. This method, however, has the weakness in that not only it is expensive but also it shows different results depending on the inerviewees and other navigational parameters. In this study, a fuzzy inference system is designed based on own ship's maneuverability verified fron simulation instead of interviewing navigators. The time and distance corresponding to the collision risk value on which avoidance maneuver should be started are set to the minimum marginal time at which own ship starts maneuvering and the minimum marginal distance suggested by marine traffic rules respectively. This system can be recorfigured as a nonlinearity-strengthened one by increasing the number of fuzzy membership functions.

• The Journal of Korean Association of Computer Education
• /
• v.13 no.6
• /
• pp.91-98
• /
• 2010

NAC(Network Access Control) has been developed as a solution for the security of end-point user, to be a target computer of worm attack which does not use security patch of OS and install Anti-Virus, which spreads the viruses in the Intra-net. Currently the NAC products in market have a sufficient technology of pre-connect, but insufficient one of post-connect which detects the threats after the connect through regular authentication. Therefore NAC users have been suffered from Zero-day attacks and malware infection. In this paper, to solve the problems in the post-connect step we generate the normal behavior profiles using the traffic information of each host, host information through agent, information of open port and network configuration modification through network scanner addition to authentication of host and inspection of policy violation used before. Based on these we propose the system to detect the hosts infected malware.

• Journal of Navigation and Port Research
• /
• v.42 no.3
• /
• pp.187-194
• /
• 2018

Aids to Navigation (AtoN) is a marine traffic safety facility used to facilitate the safe and efficient movement of shipping and enhance the protection of the marine environment by the regulations or guidelines of The International Association of Marine Aids to Navigation and Lighthouse Authorities (IALA). Our country is managing AtoN to provide consistent services for AtoN users, although an average of 141 AtoN accidents occur annually. An AtoN accident forces non-planned work on the managers to resort the function, and causes psychological anxiety for its users, ultimately resulting in economic losses. This study developed the Social Cost evaluation model of AtoN accidents. The model can be used to quantify the manager's economic activities related to the shutdown and recovery, as well as the cost associated with the inconvenience to AtoN users. The Social Cost evaluation model of AtoN accidents is proposed as the sum of the encounter cost, administration cost and risk cost.

• Journal of Korea Port Economic Association
• /
• v.28 no.2
• /
• pp.179-194
• /
• 2012

In this study, we compared the efficiency of container terminals using DEA. To do this, we designed an AHP/DEA hybrid model using AHP and DEA, and evaluated the efficiency by comparing the container terminal operation company in Gwangyang(KEC, KIT, GICT) and Busan(HBCT, DPCT, KBCT, UPT, Gamman, PNC, PNIT, HJNC, HPNT). The proposed model can control the number of selected promising container terminal by applying DEA-AR model. This model can also improve the credibility of analysis by using objective weights through the AHP application to efficiency evaluation data and normalizing the evaluation data to apply AHP and DEA. The model assumes inputs to be container crane, transfer crane, yard tractor, and reach stacker and output as container traffic. The result shows that DPCT was an efficient DMU.

• Journal of Navigation and Port Research
• /
• v.33 no.6
• /
• pp.423-428
• /
• 2009

Recently, the marine traffics have been increased along with enlargement of overseas commerce. Increasing the marine traffic may make higher the risk of marine accidents. Especially, the rate of accidents on costal area are more frequently. As if the marine safety information can be afforded to vessel and shore, the accident rate would be down. AIS AtoN is the navigational safety support device which is subject to functional requirements of IALA and technical standards of ITU. In this paper, we extend and implement the user-defined specification of AIS AtoN with message 21 for AIS basic information, messsage 6 for status report and message 12/14 for safety management.

• Journal of Internet Computing and Services
• /
• v.3 no.3
• /
• pp.87-93
• /
• 2002

A complex network and a parallel computer are made up of interconnected switching units. The role of a switching unit is to set up a connection between an input port and an output port, according to the routing information. We proposed our switching network with a remodeled architecture is a newly modified Banyan network with eight input and output ports. We have analysed the maximum throughput of the revised switch. Our analyses have shown that under the uniform random traffic load, the FIFO discipline is limited to 70%, The switching system consists of an input control unit, a switch unit and an output control unit. Therefore the result of the analyses shows that the results of the networking simulation with the new switch are feasible and if we adopt the new architecture of the revised model of the Banyan switch, the hardware complexity can be reduced. The FIFO discipline has increased by about 11% when we compare the switching system with the input buffer system. We have designed and verified the switching system in VHDL using Max＋plusII. We also designed our test environment including micro computers, the base station, and the proposed architecture. We proposed a new architecture of the Banyan switch for BISDN networks and parallel computers.

• Journal of Navigation and Port Research
• /
• v.29 no.5 s.101
• /
• pp.431-437
• /
• 2005

In korea, Freight generation models developed in korea were estimated by spatial unit method which predict freight flow by traffic zone. But it is difficult to predict freight generation using these models, because there are the difference of the totality method of sampling data on freight volume and the variability of the variables by these models on each case study, This study developed new estimation model to predict freight flow which is generated from each company using the characteristics of each company such as the freight outbound & inbound volume, the number of employee, sales, gross area, land area. This model is simpler than the that of spatial unit and can apply to the other region. The subjects of study were companies in metropolitan area and types of model were exponential regression models. The adequate explanatory variable in the models were sales. this study have a uniqueness apply micro research method to estimate freight generation not use spatial unit method but use flow unit method by each company unit.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.165-170
• /
• 2006

In the Civil Aviation field, the international trend (through ICAO, EUROCONTROL) is to adopt one positioning system that allows to follow more flight phases. This will allow to release themselves by ground installations and optimize the traffic flows following the aRea Navigation (RNAV) concept. In order to realize this goal the European Scientific Community are focusing on Augmentation Systems based on Satellite infrastructure (SBAS - Satellite Based Augmentation System) and on Ground based ones (GBAS - Ground Based Augmentation System). The goal of this work is to present some results on SBAS and GBAS performances. Regarding SBAS, the Department of Applied Sciences of Parthenope University, after the acquisition of a Novatel OEM4 SBAS receiver has created a monitoring station that reflect as much as possible a standardized measure environment for EGNOS Data Collection Network (EDCN), established by Eurocontrol. The Department of Applied Science has decided to carry out a own monitoring survey to verify the performance of EGNOS that can be achieved in South Europe region, a zone not very covered by official (EDCN) monitoring network. Regarding GBAS, we started from a data set of measurements carried out at the GBAS of Milan-Linate airport where we work on a ground installation (GMS - Ground Monitoring Station) that supervises the GBAS signal and that represent, for our purposes, the Aircraft subsystem. So the set of data collected is to be considered in RTK mode and after the measures session we processed them with the software PEGASUS v 4.11. Both experiences give us the possibility to evaluate the GNSS1 performance that can be achieved.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.59-66
• /
• 2006

This research is based on the information compiled on the occurrence of maritime casualties onboard ships registered under Central American Region (CAR) flag States. Due to nonexistence of writing reports in anyone of the countries that are integrating this Region, the information was compiled by the author through personal communication with the people involved in the casualties. The information was compiled by typing up the text and digitizing on the computer for the respective data base. For each casualty occurred, the following information was compiled, date and type of the casualty, position of the ship at the time of the casualty, dimension of the ship, number of people affected by the casualty, and cause and consequences of the casualty. Based on the number of people affected (death and disappear) by the casualties occurred was calculated the mortality rate by 100,000 persons and then compared with the Japanese mortality rate. Furthermore were analyzed the CAR maritime authorities competences and then were compared to that the Japanese counter part. In addition, the implementation rate of the International Maritime Organization (IMO) and International Labor Organization (ILO) conventions ratified by the CAR countries were analyzed. The objective of this research was to compiled and analyze the occurrences of maritime casualties happened on board the ships registered under the CAR Flag States, in order to determine the causes of these accidents. The results of the analysis enable us to better understand of the maritime safety situation of the ships that are registered under the CAR flag States. In order to reduce the occurrence of maritime casualties are proposed a series of measures based on the differences found then the comparison between CAR and Japan. Based on the results of this research, is possible to conclude that the inaccessibility of atmospheric information and the lack of safety measures onboard has been the main cause of the maritime casualties happened in the Pacific side of the CAR.