• Journal of Navigation and Port Research
• /
• 제40권6호
• /
• pp.353-360
• /
• 2016

The International Maritime Organization (IMO) has issued international standards for ship maneuverability and stability. These have been established to improve marine safety and influence the direction of research. The previous literature has been researched, but there are few studies on the relationship between ship maneuverability and stability. This study carried out a fundamental experiment to quantitatively evaluate that relationship. Radius of turn and maximum heel angle depending on changing were analyzed through a turning test using a free running model ship. The test results show the change tendency of decreasing turn radius and increasng maximum heel angle according to a GM decrease. A rough estimate equation is proposed to predict the change tendency on radius of turn and angle of maximum heel as GM decreases. Many ships can suddenly experience reduced GM due to unexpected reasons during sailing. The results in this study can be used as fundamental data to estimate a ship's tactical turn diameter and variable heel angle for steering as GM decreases.

• Journal of Satellite, Information and Communications
• /
• 제7권2호
• /
• pp.25-29
• /
• 2012

In this paper, we implemented LED beam forming communication system controlled by stepping motor. ATMega1284 was used as a MCU of main control board which has two main external IO, one is RS232 for connection with PC, the other is PORT for connection with motor driving board. Stepping motor rotated 360 degree when provided 160 clock and its rotation radius was increased by Archimedian Spiral. So LED can provide its light anywhere in the space and its beam forming was controlled by PC connected with RS232 of main control board. The action of beam forming was verified via actual HW/SW implementation.

• Proceedings of the KSME Conference
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.131-135
• /
• 2001

The atomization characteristics of an annular liquid (water) sheet of small radius with a core gas (air) flow were studied. Different sizes of annular gaps (0.2, 0.4 and 0.8 mm) were tested to find the effect of liquid sheet thickness on SMD. The inner diameter of the gas port for the core gas flow was 4 mm. Cross-section averaged SMD was measured for various liquid and gas velocities. Regions of the SMD decrease with the increase of the liquid velocity always existed regardless of the liquid sheet thickness. This attributes to the transition of the flow patterns of spray and also to the aerodynamic interaction between the atomizing gas and the ripples on the liquid sheet surface.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2009년도 정보통신설비 학술대회
• /
• pp.208-210
• /
• 2009

Currently, Wireless LAN(WLAN) service is widely deployed to provide high speed wireless Internet access through the mobile stations such as notebook and PDA. To provide enhanced security and user access control in the public WLAN area, WLAN access points should have the capability of IEEE 802.1x-based user authentication and authorization functionality. In this paper, we provide a brief understanding of IEEE 802.1x standards and related protocols like EAPOL(Extended Authentication Protocol Over LAN), EAP, RADIUS and describe how the IEEE 802.1x is designed and implemented in our embedded linux-based WLAN AP which is named i-WiNG. (Intelligent Wireless Internet Gateway). For the network security and user authenti -cation purposes, a supplicant who wants to access Internet should be authorized to access the AP port using the EAPOL.

• Journal of the Korean Institute of Navigation
• /
• 제3권1호
• /
• pp.1-17
• /
• 1979

It is very important for both naval architects and ship's officers to know the maneuvering characteristics of their ships. As the abilities of a rudder which controlls a ship can be determined clearly by analyzing the results of Kempf's zig-zag maneuver and directional stability of a ship also known by Dieudonn spiral maneuver, the importance of turning test which takes much time is recently apt to be neglected. But because the test can be executed comparatively more simply than any other maneuvering tests, it gives some informations on the directional stability, and turning characteristics may be expressed simply by the results of the test, it is still often performed. In this paper several assumptions are made to simplify the turning motion of a ship. The equations of initial transient phase, the radius ofsteady turning circle, and the center of the steady turning point are derived by using the hydrodynamic derivatives. And then the approximate method of drawing the turning circle geometrically is suggested.

• The Journal of Engineering Geology
• /
• 제32권1호
• /
• pp.1-12
• /
• 2022

Based on the extended spatial mobilization plane (SMP) criterion, we present an elastic-brittle-plastic solution for an axisymmetric cylindrical tunnel. The influences of the intermediate principal compressive stress and material strain-softening behavior are considered. Closed-form formulas for the critical support force, radius of plastic zone, and distributions of stress and displacement in surrounding rock are proposed. The elastic-plastic solution based on SMP is compared with the Kastner solution to verify the credibility of the obtained elastic-plastic solution. The elastic-brittle-plastic solution following the SMP criterion and the current solution based on the Mohr-Coulomb criterion are also compared. The rock strain-softening rate and the intermediate principal stress affect the stability of the surrounding rock. The results provide guidance for optimizing the design of support systems for tunnels.

• Journal of Environmental Science International
• /
• 제1권2호
• /
• pp.119-124
• /
• 1992

Cloud streets were successfully simulated by numerical model (RAMS) including an Isolated mountain near the coast, large sensible heat flux from the sea surface, uniform stratification and wind velocity with low Froude number (0.25) in the inflow boundary The well developed cloud streets between a pair of convective rolls are simulated at a level of 1 km over the sea. The following five results were obtained: 1) port the formation of the pair of convective rolls, both strong static instability and a topographically induced mechanical disturbance are strongly required at the same time. 2) Strong sensible heat flux from the sea surface is the main energy source of the pair of convective rolls, and the buoyancy caused by condensation in the cloud is negligibly small. 3) The pair o( convective rolls is a complex of two sub-rolls. One is the outer roll, which has a large radius, but weak circulation, and the other is the inner roll, which has a small radius, but strong circulation. The outer roll gathers a large amount of moisture by convergence in the lower marine boundary, and the inner roll transfers the convergent moisture to the upper boundary layer by strong upward motion between them. 4) The pair of inner rolls form the line-shaped cloud streets, and keep them narrow along the center-line of the domain. 5) Both by non-hydrostatic and by hydrostatic assumptions, cloud streets can be simulated. In our case, non-hydrostatic processes enhanced somewhat the formation of cloud streets. The horizontal size of the topography does not seem to be restricted to within the small scale where non-hydrostatic effects are important.

• Geomechanics and Engineering
• /
• 제30권6호
• /
• pp.539-549
• /
• 2022

Accidental anchor drop can cause disturbances to seabed materials and pose significant threats to the safety and serviceability of submarine structures such as pipelines. In this study, a series of anchor drop tests was carried out to investigate the penetration mechanism of a Hall anchor in sand and clay. A special anchor drop apparatus was designed to model the inflight drop of a Hall anchor. Results indicate that Coriolis acceleration was the primary cause of large horizontal offsets in sand, and earth gravity had negligible impact on the lateral movement of dropped anchors. The indued final horizontal offset was shown to increase with the elevated drop height of an anchor, and the existence of water can slow down the landing velocity of an anchor. It is also observed that water conditions had a significant effect on the influence zone caused by anchors. The vertical influence depth was over 5 m, and the influence radius was more than 3 m if the anchor had a drop height of 25 m in dry sand. In comparison, the vertical influence depth and radius reduced to less than 3 m and 2 m, respectively, when the anchor was released from 10 m height and fell into the seabed with a water depth of 15 m. It is also found that the dynamically penetrating anchors could significantly influence the earth pressure in clay. There is a non-linear increase in the measured penetration depth with kinematic energy, and the resulted maximum earth pressure increased dramatically with an increase in kinematic energy. Results from centrifuge model tests in this study provide useful insights into the penetration mechanism of a dropped anchor, which provides valuable data for design and planning of future submarine structures.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• 제22권2호
• /
• pp.22-30
• /
• 1986

It is very important for a navigator on bridge to know the maneuverability of his ship sufficiently at sea. Generally, the data of a turning circle test have long been used to study and evaluate the maneuverability of a ship. But referring only the data of the turning circle test method, he can not evaluate his ship's maneuvering characteristics sufficiently. So nowaday the test method added Z test to turning circle test for more detail references is considered to be desirable. In this paper, the authors performed PAL test and Z test together in order to study the maneuverability of M. S.Pusan 403, training ship of the National Fisheries University of Pusan. According to the results of PAL test, the rudder effect in port rudder angle of the M. S. Pusan 403 was found to be more effective than that in starboard one, because her changing amounts of angular velocity, turning radius and tangent speed in port rudder angles were found to be larger than those of them in starboard rudder one in unsymmetry. The relation between her drift angle(.8) and rudder angle (0) was found to be changing with .8=0.640 in direct proportion. As it appeared that her calculated K'-values were smaller than the standard K'-values of different kinds of ships in accordance with her Z test, her turning ability was found to be lower. The running distance of a turn in her 10$^{\circ}$ Z test was about 8.3 times her own length and was found not to be exceeded the standard maneuvering distance, therefore she was considered to have good maneuverabilities synthetically.

• Journal of Navigation and Port Research
• /
• 제34권6호
• /
• pp.435-440
• /
• 2010

A numerical model, which can compute deformation of rubble mound structures composed with various size materials, was proposed. In the numerical model, wave field into the mound structures was computed by CADMAS-SURF and the deformations of mound structures were computed by DEM. Interaction between wave field and sectional deformation of structure was considered and to present the variation of behaviors caused by various properties of materials, computation was carried out with random coefficients by Monte Carlo simulation method for contact stiffness and friction angle. The experiments were carried out with rubbles and glass balls with radius of 2.9cm, 2.6cm and 1.5cm. And the deformation characteristics of rubble mounds composed with various size materials were clarified. Furthermore the validity and the applicability of the model were discussed by comparing with the experimental results.