• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.34 no.1
• /
• pp.26-34
• /
• 2024

Objectives: The successful implementation of the Port Safety Special Act is a very important matter. Now that one year has passed since its introduction, this study aims to review the achievements so far and identify future tasks. Methods: The provisions of the Special Act on Port Safety were analyzed and the latest literature related to port safety management was reviewed. In addition, an in-depth interview was conducted with a business owner. Results: The achievements over the past year are as follows. As business operators took greater responsibility for safety management, blind spots in safety were resolved to an extent. Specialized training for the port unloading industry was provided, and a safety management system was established for unloading docks. In addition, the Ministry of Oceans and Fisheries was able to intervene in the prevention of safety accidents at ports through the deployment of port safety inspectors. In 2022, the port industry accident frequency and death rate declined compared to the previous year. Conclusions: The "Port Safety Special Act" has become relatively well established in the port industry over the past year. However, since the Serious Disaster Punishment Act was implemented in January of the same year, there is a limit on determining what is necessarily the effect of the Special Act. Future tasks include unifying contracts centered on cargo handling companies, supporting safety management costs, increasing the number of port safety inspectors, producing reliable port disaster statistics, and cooperating between the Ministry of Oceans and Fisheries and the Ministry of Employment and Labor.

• Journal of Navigation and Port Research
• /
• v.42 no.6
• /
• pp.388-394
• /
• 2018

When a ship is berthing on the pier using a mooring rope, excessive ship speeds may cause accidents where mooring rope is cut off. In order to prevent the mooring rope from breaking, there is need to know the approach speed limit of the ship. The purpose of this study is to estimate the berthing speed limit of a ship to prevent mooring fracture. Focus will be made to when the speed of the ship is unknown. In this study, we propose a method and procedure for estimating the berthing-speed limit based on the theory of ship resistance and the elasticity of the mooring rope. This method was found to be effective as it was observed that the mooring rope cannot be broken when it is estimated that the berthing-speed of a 135K LNG vessel, IWRC, and $6{\times}36$ steel wire mooring rope. The method proposed in this study will significantly contribute to preventing actual accidents related to mooring lines.

• ETRI Journal
• /
• v.34 no.4
• /
• pp.621-624
• /
• 2012

A new miniaturized 4-port waveguide generating a transverse electromagnetic wave is proposed. The waveguide presents enhanced performance of higher field uniformity in extended test volume up to an increased test frequency limit compared to that of the conventional 2-port waveguide. The advantageous features of the proposed waveguide have been obtained through a new design scheme based on effective miniaturization maintaining good impedance matching. Consequently, we can provide a more accurate electromagnetic compatibility test method, covering larger devices operating in higher frequencies, which is a marked improvement upon the conventional approaches.

• Proceedings of the Safety Management and Science Conference
• /
• 2000.11a
• /
• pp.95-99
• /
• 2000

The domestic ports become less competitive for the out of dated equipments and inefficient information system. Specially, Inchon Port, which is the second largest port of Korea, has the point at issue such as the excessive logistics cost because of the limit of handling capacity and the chronic demurrage. In this paper to develope the simulation programs the basic input parameters such as arrival intervals, cargo tons, service rates are analyzed and the probability density functions for there variable are estimated. Also to perform the conception of continuous berth utilization, the berth and cargo classification is reconstructed. And the more actual simulation is realized by using more detailed depth representation of water The simulation model is executed based on the knowledge base and database, and is constructed using Visual Basic and Access database. Simulation results reveal that this study suitably reflect the real berth operation and waiting time of ships is shortened.

• International Journal of Automotive Technology
• /
• v.2 no.4
• /
• pp.147-155
• /
• 2001

Analysis of the thermodynamic cycle of IC engine from the point of view of economy and emissions was carried out. From this analysis potential capability of engine development was derived. This potential capability is lean-burn engine, fuelled with homogeneous mixture with $\lambda \geq$ 1.4. Several different modes of fuelling were proposed and tested on one-cylinder test engine from the point of view of extending lean operating limit of the engine, emissions and fuel economy. Among them were: fuelling with evaporated preheated gasoline, with gas (LPG evaporated) and with liquid butane. From these modes, fuelling with liquid butane injected to inlet port was selected and finally tested. This novel system of fuelling offered better than standard engine performances and emissions at lean operating limit. These results were validated on full-scale two-cylinder engine.

• Journal of Korea Port Economic Association
• /
• v.20 no.2
• /
• pp.73-87
• /
• 2004

The purpose of this paper is to setup reasonable criterion for underwriters to reimburse the expenses of suing and labouring incurred by assured, using game theory. As for the upper limit for the reimbursement, MIA and ICC do not mention at all but stipulate that proper and reasonable expenses shall be reimbursed, while ITC-Hulls set the amount insured as the upper limit to compensate the sum of expenses and damage loss. And as for failed measures of averting and minimizing loss, MIA and ICC do not mention either, while ITC-Hulls stipulates underwriters shall compensate the expenses and damage loss within the amount insured. The main results of this paper are as follows: First, it is for the benefit of underwriters to reimburse the expenses incurred to take such reasonable measures to avert or minimizing a loss which would be recoverable under the insurance. Second, the expenses of single measure should not be above the amount insured. Third, even if the measures failed, the expense should be reimbursed if it is less than the expected value of the subject-matter insured that could be recovered by the measures. Last, if the measures are taken several times individually, even if the sum of expenses might be above the amount insured, it should be reimbursed.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.15 no.2
• /
• pp.71-78
• /
• 2020

This paper proposes vision sensors and deep learning-based around view monitoring system for ship berthing. Ship berthing to the port requires precise relative position and relative speed information between the mooring facility and the ship. For ships of Handysize or higher, the vesselships must be docked with the help of pilots and tugboats. In the case of ships handling dangerous cargo, tug boats push the ship and dock it in the port, using the distance and velocity information receiving from the berthing aid system (BAS). However, the existing BAS is very expensive and there is a limit on the size of the vessel that can be measured. Also, there is a limitation that it is difficult to measure distance and speed when there are obstacles near the port. This paper proposes a relative distance and speed estimation system that can be used as a ship berthing assist system. The proposed system is verified by comparing the performance with the existing laser-based distance and speed measurement system through the field tests at the actual port.

• Journal of Climate Change Research
• /
• v.7 no.3
• /
• pp.289-297
• /
• 2016

In this study, we researched the emission source category and it was calculated emissions estimates from existing research or literature review related to port. In addition, we have created the basis for a policy that can reduce greenhouse gas emissions calculation based on the results of the harbor. Greenhouse gas emissions estimation results, we proposed a method for allocating the GIS space. In this study, we confirmed based on the calculated greenhouse gas emissions by sources resulting in the GIS Map Port result of the expression construct for space allocation. Based on these results, it tries to provide the basic data that can be used when you want to create a local government measures to reduce scenario in the future.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.479-485
• /
• 2005

Recently the spread which RFID technology is overcomes the limit of existing recognition technology, it is forecast with the fact that it will bring a new renovation at the business and the industrial all over. Specially the case RFID technology of Port Logistic Industry will be applied it is forecast with the fact that it will bring a many effect. The government leads introduces a RFID technology of Port Logistic Industry through the various demonstration business. But it is many with the research insufficient the depression against an actuality improvement subject and the depression of technical know-how strategy and it is difficult it is undergoing. In order to solve this problems, we propose an introduction of technical know-how Road Map that we select ranking with Existing literature investigation and the present business demand anaylsis. In the future this research it it forecast in future the successful guide line to the RFID technology introduction of Port Logistic Industry will become.

• Journal of Navigation and Port Research
• /
• v.28 no.5
• /
• pp.359-364
• /
• 2004

When sea going vessel approaches her destination port, marine traffic density is increased, especially, the marine traffic is concentrated in the entrance channel and the fairway in the inner harbour is more narrow. Therefore, special navigational rules for preventing collision at sea is needed in the inner harbour. Hence there are the rules in The Public Order in Open Port Act in Korea But, in the case of conflict of navigational rule concerned, it is possible to be raised a question that which rule shall be applied preferentially. Also, it is necessary to understand the exact meaning of the navigational rules in The Public Order in Open Port Act. Because the misunderstanding of the rule is caused the collision Therefore, this paper aims to discuss the exact meaning of the navigational rule concerned in the view of legal basis and suggest the principles for a proper application of it.