• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.2
• /
• pp.49.1-49.1
• /
• 2010

The study of pores, small penumbraless sunspots, can give us a chance to understand how strong magnetic fields interact with convective motions in the photosphere. For a better understanding of this interaction, we investigate the temporal variation of several tiny pores smaller than 2". These pores were observed by the Solar Optical Telescope (SOT) onboard Hinode on 2006 December 29. We have analyzed the high resolution spectropolarimetric (SP) data and the G-band filtergrams taken during the observation. Magnetic flux density and Doppler velocities of the pores are estimated by applying the center of gravity (COG) method to the SP data. The horizontal motions in and around the pores are tracked by adopting the Nonlinear Affine Velocity Estimator (NAVE) method to the G-band filter images. As results, we found the followings. (1) Darkness of pores is positively correlated with magnetic flux density. (2) Downflows always exist inside and around the pores. (3) The speed of downflows inside the pores is negatively correlated with their darkness. (4) The pores are surrounded by strong downflows. (5) Brightness changes of the pores are correlated with the divergence of mass flow (correlation coefficient > 0.9). (6) The pores in the growing phase are associated with the converging flow pattern and the pores in the decay phase with the diverging flow pattern. Our results support the idea that a pore grows as magnetic flux density increases due to the convergence of ambient mass flow and it decays with the decrease of the flux density due to the diverging mass flow.

• Korean Journal of Materials Research
• /
• v.19 no.5
• /
• pp.270-275
• /
• 2009

Lotus-type porous nickel with cylindrical pores was fabricated by unidirectional solidification under an Ar gas atmosphere using the thermal decomposition method of the compounds such as sodium hydroxide, calcium hydroxide, calcium carbonate, and titanium hydride. The decomposed gas does form the pores in liquid nickel, and then, the pores become the cylindrical pores during unidirectional solidification. The decomposed particles from the compounds do play a rule on nucleation sites of the pores. The behavior of pore growth was controlled by atmosphere pressure, which can be explained by Boyle's law. The porosity and pore size decreased with increasing Ar gas pressure when the pores contain hydrogen gas decomposed from calcium and sodium hydroxide and titanium hydride, ; however it they did not change when the pores contain containing carbon dioxide decomposed from calcium carbonate. These results indicate that nickel does not have the solubility of carbon dioxide. Lotus-type porous metals can be easily fabricated by the thermal decomposition method, which is superior to the conventional fabrication method used to pressurized gas atmospheres.

• The Korea Journal of Herbology
• /
• v.34 no.2
• /
• pp.33-39
• /
• 2019

Objectives : The pores are the openings of sebaceous glands or apocrine glands. They are enlarged by various factors such as sex, age, genetic influence, sebum secretion, acne and so on. When the pores are visually recognizable, they become aesthetically problematic. There are various methods of treating pores, but we have tried to develop a method to reduce pore size by using daily cleanser. Methods : Facial skin examination was performed on 104 students of A university. Among them, 10 persons with large pore size were selected. We surveyed 72 students to determine their subjective skin condition, lifestyle, and washing habits etc. We made herbal fermented soaps using Seosiokyongsan and distributed them to experiment participants. We let them wash their face in the morning and evening for 6 weeks using herbal fermented soap. Prior to the experiment, their skin condition was checked and assessed using A-ONE Smart One-Click Automatic Facial Diagnosis System three times at 3-week intervals. After the experiment, the changes of skin were measured and analyzed through facial analysis test. Results : In our experiment, the early 20s, 9.6% of the students had slightly larger pores. For students with large pores, there was a high likelihood of side effects from using facial products. Using the fermented soap made of Seosiokyongsan, the average size of the pores and the number of large-sized pores were significantly reduced. Conclusion : Seosiokyongsan fermented soap can effectively reduce especially the large size of pores.

• Animal cells and systems
• /
• v.6 no.3
• /
• pp.195-199
• /
• 2002

Four new species of the genus Amynthas are described from Korea： Amynthas mujuensis sp. nov., Amynthas assimilis sp. nov., Amynthas moakensis sp. nov., and Amynthas sangumburi sp. nov. The intestinal caeca are of simple type and genital markings lacking in all four species. Amynthas mujuensis sp. nov. has male field with large oval papillae, each papilla with longitudinal seminal groove； paired spermathecal pores present in 6/7, 7/8 dorsally. Amynthas assimilis sp. nov. has mare field composed of paired symmetrical pear-shaped pads with broad ends laterally, axes of symmetry diagonally oriented towards posterior； spermathecal pores in 5/6, 6/7. Amynthas moakensis sp. nov. has male pores on small porophores surrounded by swollen concentric furrows, with the spermathecal pores in 6/7, 7/8, 8/9, ventrally. Amynthas sangumburi sp. nov. has male pores centered on 0.8 mm circular flat porophores, with the spermathecal pores in 5/6, 6/7, 7/8, 8/9, laterally.

• Journal of the Korean Ceramic Society
• /
• v.27 no.6
• /
• pp.729-734
• /
• 1990

The microstructural dependence of thermal conductivity of a high-alumina (ca. 70%) heat-insulating frebricks(ca. 75%porosity) was investigated under special consideration of the tailored-pore shape effects. Pores different shape could be incorporated into the insulators through pore formers : Styrofoam produces spherical pores while saw dust results in parallel plate pores. Concerning the pore-shape effectiveness of thermal insulation, the specimen with irregular plate pores showed much lower values of heat conductivity than those with spherical pores, the values being 0.31 to 0.38 at $600^{\circ}C$ and 0.35 to 0.47 at 100$0^{\circ}C$, respectively. On the contrary, however, other material properties such as strength and softening temeprature under load were turned out to be better in the case of the spherical pores.

• Medical Lasers
• /
• v.8 no.2
• /
• pp.97-100
• /
• 2019

Facial pores are a visible topographic feature of skin surfaces and are generally the enlarged openings of pilosebaceous follicles. Enlarged facial pores can be a significant cosmetic problem, particularly for women. Recently, gold nanoshell-mediated photothermal therapy (PTT) has been reported to be effective in treating recurrent acne. The treatment of enlarged facial pores with gold nanoshell-mediated PTT produced excellent results with no side effects. The two cases reported here demonstrate the possibility of gold nanoshell-mediated PTT as a safe and effective treatment for enlarged facial pores.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.6
• /
• pp.681-691
• /
• 2018

The typical methods of mercury intrusion porosimetry (MIP) and capillary flow porometry (CFP) were used to evaluate the pore size of cross-section of wood and the effect of the pore structure on the permeability of wood was analyzed in this study. The results of this study were as followings: The pore size of wood measured by CFP was larger than that measured by MIP except for Lime tree, Korean red pine and Paulownia. Among the three pore types of porous materials defined by IUPAC (through pores, blind pores, and closed pores), only through pores are related to permit fluid flow. MIP measures the pore size of both through pores and blind pores, while CFP measures the pore size of only constricted through pores. Therefore, pore size measured by MIP was not related to gas permeability, however pore size measured by CFP had a proportional relationship with gas permeability.

• Journal of Technologic Dentistry
• /
• v.30 no.1
• /
• pp.9-15
• /
• 2008

An investigation was carried out to examine the pores of casting bodies depending on the position of wax pattern in the ring for precious alloy by optical micrographs. From the result of optical micrographs, many pores were found in the Group C that wax pattern is placed in the center of the ring. However, any pores were scarcely found in the Group A, B, D and E that wax patterns are placed out of the center of thermal zone. In comparison with the pores of casting bodies of Group C, many pores were found at the cusp area rather than at the proximal surface. From these examination, it was concluded that wax pattern should be placed out of the center of thermal zone to prevent casting boies from occurring pores.

• Korean Journal of Materials Research
• /
• v.23 no.12
• /
• pp.722-726
• /
• 2013

Freeze drying of a porous Cu-Sn alloy with unidirectionally aligned pore channels was accomplished by using a composite powder of CuO-$SnO_2$ and camphene. Camphene slurries with CuO-$SnO_2$ content of 3, 5 and 10 vol% were prepared by mixing with a small amount of dispersant at $50^{\circ}C$. Freezing of a slurry was done at $-25^{\circ}C$ while the growth direction of the camphene was unidirectionally controlled. Pores were generated subsequently by sublimation of the camphene during drying in air for 48 h. The green bodies were hydrogen-reduced at $650^{\circ}C$ and then were sintered at $650^{\circ}C$ and $750^{\circ}C$ for 1 h. XRD analysis revealed that the CuO-$SnO_2$ powder was completely converted to Cu-Sn alloy without any reaction phases. The sintered samples showed large pores with an average size of above $100{\mu}m$ which were aligned parallel to the camphene growth direction. Also, the internal walls of the large pores had relatively small pores. The size of the large pores decreased with increasing CuO-$SnO_2$ content due to the change of the degree of powder rearrangement in the slurry. The size of the small pores decreased with increase of the sintering temperature from $650^{\circ}C$ to $750^{\circ}C$, while that of the large pores was unchanged. These results suggest that a porous alloy body with aligned large pores can be fabricated by a freeze-drying and hydrogen reduction process using oxide powders.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.04a
• /
• pp.159-164
• /
• 2009

The water droplet motion and the interaction between the droplets in a PEMFC air flow channel with multiple pores, through which water emerges, is studied numerically by solving the equations governing the conservation of mass and momentum. The liquid-gas interface is tracked by a level set method which is based on a sharp-interface representation for accurately imposing the matching conditions at the interface. The method is modified to implement the contact angle conditions on the walls and pores. The dynamic interaction between the droplets growing on multiple pores while keeping the total water flow rate through pores constant is investigated by conducting the computations until the droplet motion exhibits a periodic pattern. The numerical results show that the droplet merging caused by increasing the number of pores is not effective for water removal and that the contact angle of channel wall strongly affects water management in the PEMFC air flow channel.