• Journal of Korean Society of Forest Science
• /
• v.104 no.3
• /
• pp.337-351
• /
• 2015

The articles, published in the Journal of Korean Forest Society from Volume 1 (1962) to Volume 102 (2013), were investigated for the research trend analysis about forest plants for special purposes, i.e., edible plants, medicinal plants, feed resources, landscape plants, fiber plants, industrial usage, bee plants, bioenergy/phytoremediation uses, dye materials, and rare/endangered/endemic plants. These research articles were classified again based on the contents of research into following categories - habitat environment, ecology, physiology, propagation, silviculture (including planting and tending), genetics and breeding, identification, pest and disease control, animal-related research, components analysis and extracts, vegetation survey, biotechnology, management, recreation and forest healing, and research review. Among the total 2,433 articles published, 611 (25.1%) were related to plants for special usage or purposes. The highest frequency (14.9%) in publications was found in the field of silviculture followed by physiology, propagation, identification, and genetics and breeding, respectively. On the bases of usage, edible plants showed higher frequency (26.5%) than others, followed by industrial purpose, bioenergy/phytoremediation usage, landscape plants, medicinal plants, and rare/endangered/endemic plants. Populus plant species was the most popular in research, showing 62 articles; and Castanea crenata 36; Pinus koraiensis 35; Robinia pseudoacacia 20; Ginko biloba 17, etc. Based on the survey and analysis, the following points are suggested: 1) improved evaluation of forest plants as non-wood resources, 2) expanding research topics on the basis of production, management, and utilization of non-wood forest resources, 3) management of database of forest plant information and encouragement needed to strengthen cooperative researches satisfying the needs of other industrial and scientific areas, and 4) encouraging to promote traditional knowledge based research on forest plants.

• Journal of Korean Society of Forest Science
• /
• v.57 no.1
• /
• pp.8-13
• /
• 1982

The present study was conducted during the period July 18-August 11, 1981, at the four industrial complexes(Pohang, Ulsan, Onsan, and Yeochon) using the naked eye method. The study included the survey of plant species growing within a 2km from the area of pollution source, selection of plants tolerant to air pollution and effects of pollution on their growth. The results obtained are as follows; 1) Vascular plants surveyed as to industrial complexes consist of 90 families, 6 subfamilies, 213 genera and 290 species. Major plant families and species for each area are as follows: 1) Pohang area: 54 families, 102 genera and 126 species Leguminosae(16) Graminae(11), Compositae(9) Rosaceae(9) 2) Ulsan area: 61 families, 131 genera, and 158 species Compositae(17) Gramineae(16) Leguminosae(15) Rosaceae(9) Polygonaceae(9) Solanaceae(6) 3) Onsan area: 46 families, 98 genera, and 158 species Compositae(12) Gramineae(12) Leguminosae(12) Rosaceae(6) Polygonaceae(6) 4) Yeochon: 71 families, 150 genera, and 188 species Rosaceae(15) Leguminosae(15) Compositae(14) Graminese(14) Polygonaceae(8) Salicaceae(6) 2. Table 1 shows tolerant plants to air pollution in this study. 3. The following plants may be recommended as planting species at the industrial complex area. Leguminosae: Amorpha fruticosa L. Lespedeza bicolor Turcz. Lespedeza maximowiczii Schneider Robinia pseudoacacia L. Sophora japonica L. Fagaceae: Quercus acutissima Carr. Quercus serrata Thunb. Quercus variabilis Bl. Salicaceae: Populus tomentiglandulosa T. Lee Salix Pseudo-lasiogyne Leveille Oleaceae: Ligustrum japonicum Thunb. Ligustrum obtusifolumn S. et Z. Betulaceae: Alnus hirsuta (Space) Ruprecht Celastraceae: Euonymus japonicus thunb. Cparifolicceae: Viburnum awabucki K. Koch. Pinaceae: Cedrus deodara Loundon.

• Journal of Korean Society of Forest Science
• /
• v.37 no.1
• /
• pp.17-30
• /
• 1978

Press drying was used on italian poplar (Populus euamericana) to find the profitable means of drying. This study was designed to investigate the process of platen drying considering core temperature, drying time, current moisture content, drying rate, shrinkage and recovery, and green volume specific gravity, equilibrium moisture content and dimensional stability of press dried material and air dried material, The drying tests were conducted using 1.5 centimeter thick material at platen temperature of $175^{\circ}C$. The results were summarized as follows. 1. Core temperature was divided into three stages of drying characterized by period initial heating, plateau temperature and rising core temperature. Plateau temperature was 114 to $119^{\circ}C$. 2. The following predicting equations of drying time(y) in different core temperatures were developed for initial thickness($x_1$), initial moisture content ($x_2$) and final moisture content ($x_3$) 3. The predicting equaltion of current moisture content(u) was log u=4.658-0.060t as funtion of drying time(t) and that of drying rate(r) was log r=-2.797-0.049t. Current moisture content and drying rate of air drying were shown in figure 2. 4. The predicting equation of shrinkage in thickness direction(y) was log y=1.933+0.038t as function of drying time(t), and that of expansion in width direction was $y=-0.692+0.043t-0.001t^2$. 5. Thickness shrinkage was increased more than proportional at to pressure increase. Width shrinkage and thickness recovery was greatest at 35psi. 6. Green volume specific gravity of press dried material was 25% greater than that of air dried material. But equilibrium moisture content of press dried material was less 24% than that of air dried material. Antishrinkage efficiency of press dried material were obtained 27.7%.

• Journal of Korean Society of Forest Science
• /
• v.55 no.1
• /
• pp.37-46
• /
• 1982

These studies were carried out to know the measure of damage having an effect on the ornamental trees owing to sulfurous acid gas($So_2$) which injures much forest trees among air pollutions in south area of Korean and to know the difference of smoke resistance on the five representative species among them and therefore to establish the preventive measure of air pollutions in industrial complex of south area of Korea by the ornamental trees. The reaction formula utilized was $Na_2So_2+H_2So_4$ $Na_2So_4+H_O+So_4$. The results obtained were as follows. 1) The ornamental trees surveyed in the industrial complexes of Ul-San, Chang-Won and Po-hang belonged to 51 species, 161,699 trees in all. The most five species among 51 sorts of woody plants were Populus tomentiglandulosa, Buxus microphylla, Forsythia korenan, Juniperus chinensis and Pinus densiflora. 2) The relation between the concentration of sulfurous acid gas($So_2$) and the damage rate upon investigation in each species: In case of low concentration the destructive quantities of cells of woody plants, and the more increased the concentrations, the more increased the amount of damage. 3) The difference of smoke resistance among five species showed to be the strongest in Buxus micorphylla, the second rand Pupulus tomentiglandulosa, the third rand Forsythia koreana, the fourth rank Juniperus chinensis and the weakest in Pinus densiflora. 4) The ornamental trees of industrial complex expecially in south area of Korea in future should be planted gradually broad-leaved trees which have strong sprout, smoke resistance and thick leaved rather than comifers. 5) I think that the area of city forest in industrial complex requires about $50m^2$ per head of population and about 100m width of green belt between industrial area and residential district.

• Korean Journal of Environmental Agriculture
• /
• v.28 no.2
• /
• pp.158-164
• /
• 2009

Biosorption uses adsorbents derived from non-living biomass and removes toxic metals from industrial wastewater. The objective of this research was to evaluate the potential of low cost biosorbents to remove heavy metal ions (Cd, Cu, Pb and Zn) from aqueous solutions using chemically modified rice husk and saw dust (Pseudotsuga menziesi, Quercus, Populus). Batch-type adsorption experiments were carried out using rice husk and saw dust treated with NaOH and/or tartaric acid in artificial wastewater 100 mg metal/L). The experimental results showed that the adsorption specificity of each biosorbent was Pb > Cu > Cd > Zn irrespective of the types of biosorbents. The adsorption capacity of Pb and Cu onto NaOH-treated sawdust was increased 2${\sim}$3 times compared to the untreated one. In addition, the tartaric acid treatment increased the adsorption capacity of rice husk for Zn and Cd approximately 5${\sim}$10 fold compared to the untreated one. Surface conditions and changes in functional groups by chemical modification of each biosorbent were confirmed by SEM and FT-IR. Overall, the results show that chemical modification increases the metal removal capacity of rice bran and sawdust.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.4
• /
• pp.372-380
• /
• 2009

After supercritical water treatment of poplar wood meals (passed through 60 mesh) for 60s between 325 and $425^{\circ}C$ at the fixed pressure at $220{\pm}10atm$, some solid residues were present in the degradation products. They mainly consisted of chemically modified lignin and fibrous materials. Glucose and xylose were identified as main sugar components of fibrous materials, and the highest ratio of glucose/xylose was achieved at the highest reaction temperature. As reaction temperature was elevated, the portion of fibrous materials decreased in the solid residues, while lignin was further accumulated. The H : G : S ratio of lignin in solid residues was estimated by analytical pyrolysis. Irrespective of reaction temperatures, the H:G:S ratios were not significantly changed in the lignin in solid residues. Compared to poplar milled wood lignin (MWL), it was remarkable that H type monomers were further lowered, while portion of S type monomers increased. The amount of G type monomers were relative stable. In presence of HCl catalyst, lowering H type as well as enhancing S type was further distinguishable. According to the result of nitrobenzene oxidation (NBO), ca. 265 mg of vanillin and syringaldehyde was yielded from poplar MWL as main products. However, remarkably reduced amount of NBO products were determined from solid residues by raising operating temperature as well as by the addition of HCl catalyst. These results strongly indicate that $\beta$-O-4 linkage could be easily cleaved during supercritical water treatment, so that the lignins in the solid residues seem to be condensed phenol polymers, which are mainly formed by carbon-carbon linkages rather than $\beta$-O-4 linkage.

• Journal of Korean Society of Forest Science
• /
• v.23 no.1
• /
• pp.29-33
• /
• 1974

U-Reuk, a laureate musician in the days of King Jin-Heung, Silla Dynasty, built the Eui Rim Reservoir about 1,400 years ago. This was one of the oldest man-made reservoir. The embankment of the reservoir collapsed by the clumsy artificial drainage on August 19, 1972 when the heavy rainfall of 462 mm/day caused a dangerous overflow of the reservoir. The result of the study on the mystic ancient embankment techniques are as follows: 1. Sandy loam derived from the weathering of granite which is the most widely distributed rock type in the area, was used in the embankment. Large size logs (embankment core) of 30-50 cm in diameter were buried lengthwise along the embankment. 2. The six stocks of Pinus densiflora, 3 stocks of Quercus acutissima, 1 stock of Quercus variabilis and 1 stock of Popolus maximowiczii, altogether 11 stocks are identified. Forest types in the nearby area during the days of the reservoir construction seem to be includde a considerable number of Pinus densiflora, Quercus and Populus species. 3. The angle of repose of the earth materials is taken into account during the embankment. On top of the embankment double layers of clay (20-30 cm indepth) were spread and consolidated. Layer of litter of 20-40 cm in deep covered on the clay layer of the embankment completely, and another layer of clay was consolidated over the litter. Finally, a layer of stones of 10-30 cm in diameter and clay (yellow soil layer) toped the embankment. 4. At the lower part of the embankment clay layer was thicker and became thinner as it goes upwards. At every layer, soil was consolidated and burned. When embankment was completed, it was covered evenly with heavy clay, and finally it was topped with general soil. 5. The heavy clay layer on the inner slope of the embankment showed gray phenomena and litter remained raw humus layer. The clay layer functioned as rubber in the water, and raw humus layer prevented water from seepages. Thus, the embankment was solidly built in this way. 6. The ancient embankment techniques used soils conveyed from nearby area taking the angle of repose into account. Once embankment was completed, clay and litter layers were added to have a plasticity and to withstand the water pressure. 7. It is an excellent technique that the reservoir was constructed with least labor for maximum effects while the recent embankment techniques requires a large amount of labor.

• Korean Journal of Environment and Ecology
• /
• v.26 no.1
• /
• pp.39-45
• /
• 2012

To explore on the defense strategies against hervivory of 67 broadleaved tree species, morphological characteristics of the leaf, leaf domatia structure and the number, herbivores insects and mites on the leaves, collected from the trees growing in Taean-gun, Chuncheongnam-do were investigated. 46 broadleaved tree species(68.7%) had the domatia structures, and 21 species including Quercus salicina and Magnolia grandiflora did not. 31 species including Juglans mandshurica and Carpinus laxiflora reveals tuft type, 12 species including Quercus dentata and Corylus heterophylla reveals pocket+tuft type, and 2 species, Sorbus alnifolia and Prunus yedoensis does pocket type, and Viburnum odoratissimum var. awabuki does pouch type. Domatia number per leaf proves the highest figures, 23.4/leaf for Quercus dentata. Plant defense strategies using leaf lower-surface trichomes of Magnolia grandiflora reveals dense villous, those of Populus alba and Vitis vinifera reveals dense pilose, that of Elaeagnus umbellata does dense scaly hairs, that of Pueraria lobata does dense strigose. Plant defense strategies using extrafloral nectaries were adapted 23 tree species(34.3%). Observed examples are Prunus tomentosa, Ficus carica, Viburnum dilatatum and Carpinus laxiflora. Predatory mites were observed on the leaves of 40 tree species(59.7%), and mean values of predatory mites was highest values 23.4/leaf in Quercus dentata. Minute arthropods destroying the leaf of broadleaved trees. are such as Periphyllus californiensis, P. viridis, Diaspididae sp., gall mites, thrips, and total numbers observed were odered gall mites, Diaspididae sp., aphids and thrips. Natural enemies of these hervivores arthropods are such as predatory mites, Chilocorus rubidus, Coccinella septempunctata and the nymph, Aphidius ervi. These results indicate that defense strategies including protective mutualisms may be frequent in the temperate broadleave trees.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.15 no.3
• /
• pp.33-50
• /
• 1988

This study was executed to find out how to improve on the planting and use of the plants in Kangweon- Do by surveying the planting areas -gardens, parks, streets, schools, etc. - in five cities of this province, and to select available native plants by surveying the main mountains in this province. The results are as follows ; 1. The species number within surrey areas was 319 species. and the species of which planting frequency was very high were Hibiscus syriacus, Juniperus chinensis, Buxus microphylla v. koreana, etc.. 2. The species number of school trees and flowers of 202 schools in Kangweon-Do were 33 species, 32 species respectively. and the species of school trees and flowers that showed the highest preference were Juniperus chinensis, Forsythia koreana each. 3. The species number of flowers and trees designated in 22 City and Keun were 14 species, 7 species respectively, and the species of flowers and trees that presented the highest designation frequency were Rhododendron schlippenbachii, Ginkgo biloba each. 4. The street trees planted along the main streets in Kangweon-Do were 18 species and 84,939 individuals, and the ratio of Populus alba${\times}$glandulosa was the highest among occurrence individuals. 5, As for the composition ratios of life forms of plants within survey areas, the ratio of deciduous broad-leaved tree was the highest as about 56% and that of deciduous coniferous tree was the lowest as about 1.6%. The ratios of native species versus exotic were 43 : 57 6. Through these results, it was thought that the diversification of planing species, the selection of plants suitable to each space and the generalization of use of native species were needed. So 254 plants native to Kangweon-Do were presented to correspond to these requirements.

• Current Research on Agriculture and Life Sciences
• /
• v.14
• /
• pp.49-60
• /
• 1996

In order to evaluate soil factors affecting the growth of Italian poplar, 23 areas planted with Italian poplar were surveyed. These 23 areas were classified into 3 categories, river-side, fallow-land and hill-side. The growth performance and soil factors for each area were investigated. The growth of Italian poplar at river-side was shown to be superior to that of fallow-land and fill-side. The rates of growth for fallow-land and hill-side are decreased by 8% and 21% compared to those of river-side, respectively. This suggests that plantation of Italian poplar at hill-side would not be profitable. Soil conditions of high productive area appeared liquid phase 20%, porosity 45%, water holding capacity 35 - 40%, soil hardness $1kg/cm^3$. pH 6 and rich in organic matter and total nitrogen. The results of factor analysis for soil factors affecting to Italian poplar growth that showed eigenvalue over 1 and communality value over 70% explained factor 1 : liquid phase, porosity and water holding capacity, factor 2 : pH and calcium, and factor 3 : soil hardness. This suggests that physical characteristics of soil is more important than chemical characteristics for Italian poplar growth. Multiregerssion analysis was conducted between diameter growth and soil hardness, liquid phase and calcium. The t-values for each independent variables showed significance at 1 - 10% level, but water holding capacity and pH are not significant. It is supposed that sites suitable to Italian poplar were alluvial plain of sandy loam or part of banking soil, well-ventilating soil, lower soil hardness, apposite soil moisture absorbing with about 100cm of ground water level, plentiful organic matters and total nitrogen and little acidity soil.