• 정보처리학회논문지C
• /
• 제16C권6호
• /
• pp.753-760
• /
• 2009

시간과 장소에 상관없이 인터넷 서비스를 제공 받고자 하는 인터넷 사용자들의 요구가 증가함에 따라 MANET(Mobile Ad-Hoc Network) 환경에서도 인터넷 연결성을 제공하기 위한 연구들이 주목을 받고 있다. 기존 DHCP(Dynamic Host Configuration Protocol) 기반 방식의 경우는 망 내 노드들에게 주소를 할당하기 위하여 다중 홉 거리에 있는 DHCP 서버와 메시지를 교환해야 하기 때문에 메시지 손실이 쉽게 발생할 수 있으며, 이로 인해 주소 설정의 안정성이 감소하고 주소 설정 시간이 증가하는 문제점이 있다. 따라서 본 논문에서는 노드가 DHCP 서버로부터 하나의 주소만을 할당 받는 것이 아니라 일정 크기의 주소 영역을 할당 받을 수 있게 하였다. 또한 주소 영역을 할당 받은 노드가 이웃의 주소 요청 노드들에게 자신의 주소 영역 중 일부를 할당할 수 있도록 하는 새로운 주소 설정 기법을 제안하였다. 모의 실험을 통하여 제안 기법이 기존 DHCP 기법에 비하여 주소 설정 시간과 제어 메시지 수 측면에서 각기 77%와 61%의 성능을 향상시킬 수 있음을 보였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권10호
• /
• pp.3419-3437
• /
• 2022

Anonymization technology is an important technology for privacy protection in the process of data release. Usually, before publishing data, the data publisher needs to use anonymization technology to anonymize the original data, and then publish the anonymized data. However, for data publishers who do not have or have less anonymized technical knowledge background, how to configure appropriate parameters for data with different characteristics has become a more difficult problem. In response to this problem, this paper adds a historical configuration scheme resource pool on the basis of the traditional anonymization process, and configuration parameters can be automatically recommended through the historical configuration scheme resource pool. On this basis, a privacy model hybrid recommendation algorithm for user satisfaction is formed. The algorithm includes a forward recommendation process and a reverse recommendation process, which can respectively perform data anonymization processing for users with different anonymization technical knowledge backgrounds. The privacy model hybrid recommendation algorithm for user satisfaction described in this paper is suitable for a wider population, providing a simpler, more efficient and automated solution for data anonymization, reducing data processing time and improving the quality of anonymized data, which enhances data protection capabilities.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2017년도 춘계학술논문요약집
• /
• pp.313-314
• /
• 2017

• 설비공학논문집
• /
• 제28권5호
• /
• pp.195-201
• /
• 2016

Enhanced tubes are widely used in air-conditioning and process industries. Structural tubes having three-dimensional roughness are well known to be able to significantly enhance pool boiling heat transfer of refrigerants. In this study, five structural enhanced tubes having different fin density, fin height, and fin gap width were tested using R-134a. Results showed that the heat transfer coefficient was increased with increased fin density. Within test range, the effect of fin height on pool boiling heat transfer coefficient was insignificant. The heat transfer coefficients of the optimum configuration (2047 fpm, 0.21 mm gap width) tube were lower than those of other commercial enhanced tubes. This might be due to the larger fin gap width of the present enhanced tube.

• Nuclear Engineering and Technology
• /
• 제51권1호
• /
• pp.95-103
• /
• 2019

Vapor explosions can be classified in terms of modes of contact between the hot molten fuel and the coolant, since different contact modes may affect fuel-coolant mixing and subsequent vapor explosion energetics. It is generally accepted that most vapor explosion phenomena fall into three different modes of contact; fuel pouring into coolant, coolant injection into fuel and stratified fuel-coolant layers. In this study, we review previous stratified steam explosion experiments as well as recent experiments performed at the KTH in Sweden. While experiments with prototypic reactor materials are minimal, we do note that generally the energetics is limited for the stratified mode of contact. When the fuel mass involved in a steam explosion in a stratified geometry is compared to a pool geometry based on geometrical aspects, one can conclude that there is a very limited set of conditions (when melt jet diameter is small) under which a steam explosion is more energetic in a stratified geometry. However, under these limited conditions the absolute energetic explosion output would still be small because the total fuel mass involved would be limited.

• 한국에너지공학회:학술대회논문집
• /
• 한국태양에너지학회, 한국에너지공학회 1993년도 춘계 공동학술발표회 초록집
• /
• pp.70-78
• /
• 1993

Heat pipes, applied to flat plate solar collectors, have a long and slender configuration with relatively low heat flux on the evaporator. Such a heat pipe has a tendency to build-up a liquid pool at the lower half of evaporator zone, and at this pool occurs such complicated phenomena of evaporation and fluid dynamics as superheat, sudden generation of bubble, its likely explosive growth process and flooding etc. In the present study, we tried to solve those problems by means of adjusting the two principle design parameters, liquid fill charge and wick length, using 4 heat pipes and 3 thermosyphons, with different values of parameter respectively. The corresponding results can be summarized as followings, - The thermal conductance of heat pipes was largely improved by el eliminating wick from adiabatic and condenser zone. - But on evaporator zone wick is inevitable to reduce behavior of the build -up of liquid pool , where arise diverse internal complex phenomena. - The liquid fill charge should have to be increased by 10∼20％ more than the quantity to saturate the wick.

• Nuclear Engineering and Technology
• /
• 제36권4호
• /
• pp.285-294
• /
• 2004

Pressure wave propagation in the discharge piping with a sparger submerged in a water pool, following the opening of a safety relief valve, is analyzed. To predict the pressure transient behavior, a RELAP5/MOD3 code is used. The applicability of the RELAP5 code and the adequacy of the present modeling scheme are confirmed by simulating the applicable experiment on a water hammer with voiding. As a base case, the modeling scheme was used to calculate the wave propagation inside a vertical pipe with sparger holes and submerged within a water pool. In addition, the effects on wave propagation of geometric factors, such as the loss coefficient, the pipe configuration, and the subdivision of sparger pipe, are investigated. The effects of inflow conditions, such as water slug inflow and the slow opening of a safety relief valve are also examined.

• 대한안전경영과학회지
• /
• 제13권2호
• /
• pp.157-167
• /
• 2011

Currently, interest on physical distribution is increasing due to burden of oil cost increases as oil price rises day by day. As interest grows, there are number of studies have been conducting on saving the cost of distribution. On the other hand, number of study on service of distribution is insufficient. Actually, subject of service of physical distribution have been studied by number of survey organizations, research organizations and mass media. Although, configuration for each organization is different from each other and it is hard to measure objective satisfactory factor of customers. This means needs for constructing standardized measuring tool as well as research on measuring service quality of distribution is not active. Therefore, this research is to compare and analyze compatibility of service quality measuring using SERVQUAL and SERVPERF and trying to clarify differences affected by importance service quality by each level to actual service quality. Also, this research is to make basic and standardized measuring model to improve quality of physical distribution especially using analysis of service quality and customer satisfaction of pallet pool service which contributes rationalization of distribution and reduce the cost by standardizing specification and size of pallet, allowing sharing of pallet. To conduct this research, case study of a company A is used where it is in a pallet pool business. Using this example, the goal is to give help on pallet pool business a strategic exercise if the business by point out major factors that affect customer satisfaction by collecting customer assessment along with examination of SERVQUAL and SERVPERF in measuring service quality if pallet pool service.

• 한국인터넷방송통신학회논문지
• /
• 제16권1호
• /
• pp.69-75
• /
• 2016

대화형 웹 환경에서 응용 프로그램의 성능은 고품질의 서비스를 제공하기 위한 필수적인 이슈이다. 즉, 웹 요청 트랙픽이 일시적으로 급증할 경우, 서버의 CPU 여유 시간이 부족하게 되고 결국 요청의 응답 시간이 증가하기 때문에 클라이언트에게 좋지 않은 경험을 유발하게 된다. 본 논문에서는 J2EE 응용 서버에서 설정 가능한 파라미터인 스레드 풀과 데이터베이스 연결 풀의 크기가 응용 프로그램의 성능에 끼치는 영향을 분석한다. 또한 최적의 파라미터 값을 얻기 위해서 웹 성능 분석을 위한 실험적 평가 기법을 소개한다. 마지막으로 사례 연구를 통해 성능 분석 결과를 제시한다.

• Nuclear Engineering and Technology
• /
• 제52권11호
• /
• pp.2499-2510
• /
• 2020

We performed 3-D (3-dimensional) IVR (In-Vessel Retention) natural convection experiments simulating the oxide layer in the three-layer configuration, varying the aspect ratio (H/R). Mass transfer experiment was conducted based on the analogy to achieve high Ra_H's of 1.99 × 10¹²-6.90 × 10¹³ with compact facilities. Comparisons with 2-D (2-dimensional) experiments revealed different local heat transfer characteristics on upper and lower boundaries of the oxide layer depending on the H/R. For the 3-D shallow oxide layer, the multi-cell flow patterns appeared and the number of cells was considerably increased with the H/R decreases, which differs with the 2-D experiments that the number of cells was independent on H/R. Thus, the enhancement of the downward heat transfer and the mitigation of the focusing effect were more noticeable in the 3-D experiments.