• 해양환경안전학회지
• /
• 제22권1호
• /
• pp.82-89
• /
• 2016

본 연구에서는 국내 여수항만에 길이 500미터, 폭 200미터, 두께 2미터인 폰툰형 VLFS타입의 해상부두를 제안하였다. 이 구조물은 해상에서 오랫동안 파랑하중을 견뎌야하므로 파랑응답해석이 필수적이다. 유체-구조부 해석에는 직접법을 사용하였고, 연성운동방정식을 수치해석하여 응답 결과를 구하였다. 구조부는 유한요소법을 이용하여 계산하였으며, 유체부는 경계요소법을 사용하여 분석하였다. 탄성변형과 강체운동으로 인한 동적응답을 수치적으로 분석하였으며, 파장, 수심, 파향, 구조물의 강성 요소를 고려하여 규칙파에 대한 응답을 해석하였다. 연구의 결과, $L/{\lambda}$ 1.5를 기준으로 응답이 변화하였고, 입사파의 방향에 따라 비틀림 현상이 나타났다. $L/{\lambda}=8.0$의 경우 수심이 증가할수록 입사측에서의 응답이 증가하는 경향이 나타났고, 강성의 변화에 따라 수직변위진폭의 피크점이 좌우로 이동하였다.

• Smart Structures and Systems
• /
• 제9권1호
• /
• pp.71-104
• /
• 2012

In this research, a typical tension-leg type of floating platform incorporated with an innovative concept of underwater tuned liquid column damper system (UWTLCD) is studied. The purpose of this study is to improve the structural safety by means of mitigating the wave induced vibrations and stresses on the offshore floating Tension Leg Platform (TLP) system. Based on some encouraging results from a previous study, where a Tuned Liquid Column Damper (TLCD) system was employed in a floating platform system to reduce the vibration of the main structure, in this study, the traditional TLCD system was modified and tested. Firstly, the orifice-tube was replaced with a smaller horizontal tube and secondly, the TLCD system was combined into the pontoon system under the platform. The modification creates a multipurpose pontoon system associated with vibration mitigation function. On the other hand, the UWTLCD that is installed underwater instead would not occupy any additional space on the platform and yet provide buoyancy to the system. Experimental tests were performed for the mitigation effect and parameters besides the wave conditions, such as pontoon draught and liquid-length in the TLCD were taken into account in the test. It is found that the accurately tuned UWTLCD system could effectively reduce the dynamic response of the offshore platform system in terms of both the vibration amplitude and tensile forces measured in the mooring tethers.

• 한국해양공학회지
• /
• 제20권6호
• /
• pp.101-107
• /
• 2006

Recently, with the increase in requirements for marine development, a marine urbanism is being visualized, with more and more huge-scale structures at the scope of the ocean space utilization. In particular, a pontoon-type structure has attracted attention, since The Floating Structures Association of Japan proposed a new concept as the most suitable one of floating airports. The Very Lage Floating Structure (VLFS) is considered a flexible structure, for a quite large length-to-breadth ratio and its geometrical flexibility. The main objective of this study is to makean exact and convenient prediction about the hydro-elastic response on very large offshore structures in waves. The numerical approach for the hydro-elastic responses is based on the combination of the three dimensional source distribution method and the dynamic response analysis method, which assumed a dividing pontoon type structure, as many rigid bodies connected elastic beam elements. The established hydo-elastic theory was applied to the radiation forces caused by motions of a whole structure, formulated using the global coordinate system, which has the origin at the center of the structure. However, in this paper, we took radiation forces, occurred by individual motions of floating bodies, into consideration. The calculated results show good agreement with the experimental and calculated results by Yago.

• 한국해양공학회지
• /
• 제22권1호
• /
• pp.22-29
• /
• 2008

A numerical investigation is made on the effects of the location and shape of the front wall of an OWC(Oscillating Water Column) chamber on the hydroelastic response of a VLFS. Most of the studies on the effects of an OWC chamber on the response of a VLFS have assumed the location of the OWC chamber to be at the front of the VLFS. In the present study, an OWC-chamber is introduced at an arbitrary position in relation to a VLFS to determine the influence of the location and shape of the OWC chamber on the hydroelastic response of the VLFS. A finite element method is adopted as a numerical scheme for the fluid domain. or the finite element method, combined with a mode superposition method, is applied in order to consider the change of mass and stiffness The OWC chamber in a piecewise constant manner. or the facilitated anefficient analysis of The hydroelastic response of the VLFS, as well as the easy modeling of different shape and material properties for the structure. Reduction of hydroelastic response of the VLFS is investigated for various locations and front wall shapes of the owe chamber.

• 대한조선학회논문집
• /
• 제43권3호
• /
• pp.351-361
• /
• 2006

The fatigue strength analysis of VLFS is carried out by using a 3-dimensional plate finite element model with a zooming technology which performs the modeling of wide portions of the structure by a coarse mesh but the concerned parts by a very fine mesh of t by t level. And a stepwise substructure modeling technique for global loading conditions is applied which uses the motion response of the global structure from 2-D plate hydroelastic analysis as the enforcing nodal displacements of the concern 3-D structural zooming model. Seven incident wave angles and whole ranges of frequency domains of wave spectrum are considered. In order to consider the effect of breakwater, the modified JONSWAP wave spectrum is used. Applying the wave data of installation region, the longterm spectrum analysis is done based on stochastic process and the fatigue life of the structure is estimated. Finally some design considerations from the view point of fatigue strength analysis of VLFS are discussed.

• 대한조선학회논문집
• /
• 제42권6호
• /
• pp.644-653
• /
• 2005

In general the loads due to ocean wave are considered as main design parameters governing the global structural safety of VLFS (Very Large Floating Structure). In order to predict design wave loads accurately, hydro-elastic analysis must be conducted considering the initial global flexural rigidity of VLFS. However, in order to determine the structural scantling of major members (deck, bottom, side panels and longitudinal / transverse BHD etc.), static load and design wave loads must be given as explicit form generally. Therefore in order to determine a proper structural arrangement and scantlings of VLFS at initial design stage, both calculations of structural scantling and hydro-elastic analysis for wave conditions must be conducted iteratively and the convergence of their results must be checked. On this paper, based on the case design of a 500×300 m size's floating marina resort, the details of structural design technique using hydro-elastic analysis are explained and discussed. At first, the environmental conditions and the system requirements of the design of marina resort are described. The scantling formulas for the major members of pontoon type VLFS are proposed from the local and global design points of view. Considering the design wave loads as well as static design loads, the structural safety is checked iteratively.

• 대한조선학회논문집
• /
• 제42권4호
• /
• pp.357-367
• /
• 2005

A numerical method is developed for the hydroelastic response of the Very Large Floating Structure considering the sea-bottom topography. The sea-bottom effects on the hydroelastic response of the floating structure is studied. The sea-bottom topography should be considered when the floating structure is constructed near the shore. To investigate the sea-bottom effects, four different sea-bottom topographies are considered in this study. finite-element method based on the variational formulation is used in the fluid domain, The pontoon-type floating structure is modeled as the Kirchhoff plate. The mode superposition method is adopted for the hydroelastic behavior of the floating structure.

• 한국항해항만학회지
• /
• 제30권2호
• /
• pp.131-136
• /
• 2006

Researches on a superstructure built on a floating structure in the shape of pontoon type have begun in recent years. A superstructure responds by wave load and it is important to evaluate its habitability. The purpose of this study is evaluation and investigation of habitability of a superstructure due to wave for 10 year return period. In this study, response analyses of the superstructure built on middle-sized floating structure due to the waves of three cases were carried out by 3-D integration analysis, which means analyzing the calculation model integrated a superstructure with a floating structure, and its habitability was evaluated by the evaluation diagrams. As the result, the habitability differed by each wave condition The use of a superstructure is restricted according to the disposition of a floating structure for incident wave angle.

• 한국해양공학회지
• /
• 제20권4호
• /
• pp.83-90
• /
• 2006

Recently, as the technology of utilization for the ocean space is being advanced, floating structures are asked for being mare and mare huge-scale. A very large floating structure(VLFS) is considered as a flexible structure, because of a quite large length-to-breadth ratio and its geometrical flexibility. The main object of this study is to develop an accurate and convenient method on the hydroelastic response analysis of very large offshore structures on the real sea states. The numerical approach for the hydorelastic responses is based on the combination of the three dimensional source distribution methods, the dynamic response analysis method and the spectral analysis method. A model is considered as many rigid bodies connected elastic beam elements. The calculated results shaw good agreement with the experimental and calculated ones by Ohta.

• 대한토목학회논문집
• /
• 제32권5B호
• /
• pp.313-320
• /
• 2012

본 논문에서는 폰툰형 콘크리트 부유구조체의 하부슬래브에 발생하는 인장력을 억제하여 구조적 안전성을 향상시킬 수 있는 방안으로 부유구조체 외측 모듈을 반잠수식 모듈로 구성하는 구조시스템을 제시하였다. 본 시스템의 적용성을 확인하기 위해 반잠수식 모듈 제원과 전체 시스템에 대한 반잠수식 모듈의 구성비를 변화시켜 외력에 대한 구조응답과 부유구조체 중량, 흘수를 종합적으로 검토하였다. 구조성능 검토 시 효율적인 매개변수 연구를 위해 이단계 등가 정적 해석법을 도입하였으며, 본 해석법을 바탕으로 시스템 제원 변화에 따른 각 구조부 작용 외력의 변화와 구조 거동을 분석하였다. 분석 결과, 본 시스템 도입 시 콘크리트 부유구조체의 하부슬래브 발생 인장력을 충분히 억제할 수 있는 것으로 나타났으며, 적정한 반잠수식 모듈의 구성비는 부유구조체 길이대비 약 15% 이하인 것으로 분석되었다.