• Proceedings of the Korean Fiber Society Conference
• /
• 2000.04a
• /
• pp.21-24
• /
• 2000

• Electrical & Electronic Materials
• /
• v.7 no.6
• /
• pp.520-526
• /
• 1994

A rectifying heterojunction consisting of polyparaphenylene(PPP) and polypyrrole(PPY) films was prepared by the electrochemical method. The photoresponse in the heterojunction of PPY and PPP is similar to the absorption spectrum of undoped PPP. This fact suggests that photoresponse depends strongly upon polyparaphenylene of semiconductor. The fill-factor was calculated from the photo current-voltage curve to be 0.19, which is relatively small compared to polyacetylene-polythiophene heterojunctions.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.3
• /
• pp.125-133
• /
• 2002

In order to fabricate stable conductive polymer actuators which can be operated in air, conductivity and solidity of polymer electrolyte materials have been studied. It was found that Nafion+LiCl is appropriate material to be used for conductive polymer actuator. Using the Nafion+LiCl solid polymer electrolyte, single layer PPy actuators have been fabricated and their deflection was measured. Double layer PPy actuators make up for shortcoming of single layer PPy actuator and displacement and frequency response can be improved by fabrication of double layer PPy actuator. This kind of all-solid-polymer actuator can be used for practical applications.

• Textile Coloration and Finishing
• /
• v.2 no.2
• /
• pp.7-13
• /
• 1990

The polyacrylonitrile (PAN)/polypyrrole (PPy) composite films have been prepaxed by exposing the PAN films containing oxidizing agent such as ferric chloride or cupric chloride to pyrrole vapor. The formation of PPy in PAN was confirmed by means of IR spectroscopy and scanning electron microscopy and the X-ray differaction study showed the amorphous structure of PPy. The breaking strength of PAN/PPy composite films was 3-5 times lower but the breaking elongation of them was 4-5 times higher than that of PAN film.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.30 no.2
• /
• pp.5-15
• /
• 2022

In this study, heated tobacco biomass was prepared as an active material for supercapacitor device. Retrieved tobacco leaf from the heated tobacco was carbonized at various temperature(800/850/950℃). Carbonized tobacco leaf material synthesized at 850℃ exhibited the highest C/O ratio, indicating the finest carbon quality. In addition, polypyrrole was coated onto the carbonized leaf material for increasing the electrochemical performance via low-temperature polymerization method. As-synthesized carbonized leaf material at 850℃(CTL-850)-based electrode and polypyrrole-coated carbonized leaf material(CTL-850/PPy)-based electrode displayed outstanding specific capacitances of 100.2 and 155.3F g^-1 at 1 A g^-1 with opertaing window of -1.0V and 1.0V. Asymmetric supercapacitor device, assembled with CTL-850 as the negative electrode and CTL-850/PPy as the positive electrode, manifested specific capacitance of 31.1F g^-1(@1 A g^-1) with widened operating voltage window of 2.0V. Moreover, as-prepared asymmetric supercapacitor device was able to lighten up the RED Led (1.8V), suggesting the high capacitance and extension of operating voltage window. The result of this research may help to pave the new possibility toward preparing the effective energy storage device material recycling the biomass.

• Fibers and Polymers
• /
• v.7 no.2
• /
• pp.105-111
• /
• 2006

Coating the fibre surface by in situ oxidative chemical polymerisation of polypyrrole (using $FeCl_3$ as oxidant) is a readily industrial applicable way to give electrical properties to wool with good ageing stability [1], although pre-treatments are required to avoid damage of the cuticle surface due to the acidic condition of the process. FT-IR and EDX analysis reveal that organic sulphonates and sulphates, used as dopants, are absorbed by wool, while chlorine ions are preferably embedded on the polypyrrole layer. The resulting electrical conductivity seems mainly due to the presence of chlorine as counter-ion of polypyrrole; nevertheless, the presence of arylsulphonate in the polymerisation bath increases the electrical conductivity of the coating layer.

• Proceedings of the KIEE Conference
• /
• 2004.11a
• /
• pp.278-280
• /
• 2004

본 논문의 내용은 다중전극에 전기 중합한 전도성 고분자를 이용하여 약물을 결합한 후 전압 인가에 의한 선택적인 약물방출을 구현하는 것이다. Glass wafer에 anode와 cathode 전극을 제작하고 4개의 anode 전극면에 각각 전기중합으로 전도성 고분자막을 합성하였다. 양이온성 약물인 lidocaine을 결합할 수 있도록 피롤과 함께 도펀트로써 분자량이 큰 DBS를 사용하였으며 고분자막의 이온출입원리를 이용하여 약물을 결합하고 방출하였다. Cyclic voltammogram로부터 PPy(DBS) Polypyrrole (dodecylbenzene sulfonate) 전극의 산화 환원특성 및 전극면에 PPy(DBS) 막이 생성되기 위한 조건을 확인하였고, 그 결과를 토대로 PPy(DBS)막을 3전극 시스템과 Coulometry를 이용하여 전압을 인가하여 합성하였고, 합성전하량으로 부터 PPy(DBS)막의 두께를 알 수 있었다. Lidocaine의 결합 및 방출 시에도 정전압을 이용하였으며 약물의 방출 유무를 확인하기 위하여 UV spectrometer를 사용하였다. 다중전극에 PPy(DBS)막을 1.5um 두께로 합성한 후 lidocaine을 결합시키고 선택적으로 약물을 방출한 결과 각각의 PPy(DBS)막으로부터 $1.4{\sim}1.7mg$의 약물이 방출됨을 확인 할 수 있었다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.137-137
• /
• 2003

Conducting PPy/PVA composite and pure PPy gas sensors were prepared by in-situ vaporstate polymerization method in a vaporization chamber under N2 condition, by exposing the pre-coated electrode with PVA/FeC13 to distilled pyrrole monomer. The various electrical sensing behaviors of both types of sensors were systematically investigated by a flow measuring system including mass flow controller (MFC) and bubbling bottle. The FT-Raman spectroscopy of vapor state polymerized PPy was identical to that of chemically polymerized PPy, confirming the same chemical structure. Both types of sensors had positive sensitivity when exposed to methanol gas. The sensitivity varied linearly with gas concentration in the range of 50ppm to 1059ppm. The detection limit of PPy/PVA sensor was believed to be as low as 10ppm. The sensitivity of PPy/PVA composite sensor was higher than that of pure PPy sensor. Both the response time and recovery time of PPy/PVA composite sensors were longer than those of pure PPy sensors. The thickness of the sensing film affected the sensitivity this way that the sensor having thinner film had higher sensitivity, indicating that the resistance of polymer film involved in the sensing behavior was bulk resistance rather than surface resistance. The reproducibility of PPy/PVA composite sensor was excellent during eight on-off cycles by switching between N2 and 3000ppm methanol gas. The sensitivity of PPy/PVA composite sensor was only maintained for two weeks, while the sensitivity of pure PPy sensor was maintained over two months.

• Journal of the Korean Electrochemical Society
• /
• v.5 no.1
• /
• pp.13-16
• /
• 2002

The type of graphite(Gr)/ppy, fullerene$(full^-)$ electrode, ppy one modified with $(full^-)$, was prepared with the cell type of Gr/5mM ppy, 1mM $(full^-)$, 0.1M $TBABF_4$, CH3CN/Pt. The values of the ionic formation rate of the it at electrode materials such as Pt/ppy, Pt, Gr and Au were $93.6,\;7.0\times10^2,\;42.6\;and\;1.3\times10^2cms^{-1}$ respectively. The admittance values of the Grippy electrode and the modified Grippy, $(full^-)$ one were five times enhanced $1.7\times10^{-3}S\;to\;8.3\times10^{-3}\;S$ and capacitance values of electrical double layer of them were 174 times increased $2.4\times10^{-6}\;F\;to\;4.2\times10^{-5}\;F$ respectively.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2007.11a
• /
• pp.27.2-27.2
• /
• 2007