• 제목/요약/키워드: Polymer-modified asphalt

검색결과 70건 처리시간 0.023초

Self-Healing Asphalt Prepared by using Ionic Epoxy Resin

  • Lee, Young-Jik;Seo, Jun-Young;Kim, Seo-Yeon;Lee, Seung-Hyun;Hong, Young-Keun
    • Elastomers and Composites
    • /
    • 제50권3호
    • /
    • pp.167-174
    • /
    • 2015
  • Anionic epoxy compound was synthesized and added to asphalt aiming to prepare self-healing asphalt. Epoxy-modified asphalt showed excellent modification effect and healing effect as well. The results revealed that with 5% addition of polymer the tensile strength, impact strength and complex shear modulus of the polymer-modified asphalt increased by 65%. 64% and 35%, respectively. It seems that high interaction occurs between polymer and asphalt matrix. Self-healing efficiency of the polymer-modified asphalt based on tensile strength showed 100%, comparing to 79% of straight asphalt. In impact experiment the polymer-modified asphalt showed 99% of healing efficiency, comparing to 77% of straight asphalt. In rheological experiment the polymer-modified asphalt showed 103% of healing efficiency, comparing to 72% of straight asphalt. It appears that the ionic bonding existing in epoxy polymers contributed to high values of self-healing efficiency. The polymer which has high intermolecular force fills the crack of the asphalt, pulling the opponent side each other, and so the original properties were restored.

첨가제를 이용한 중온형 폴리머 개질 아스팔트 콘크리트 혼합물의 실용화 연구 (A Study on Field Applications of Polymer-Modified Warm Asphalt Concrete Mixture using Admixture)

  • 김낙석;이진구;박석순
    • 한국재난정보학회 논문집
    • /
    • 제6권1호
    • /
    • pp.28-43
    • /
    • 2010
  • This paper presents the field applications of polymer-modified warm asphalt mixture which can reduce the temperature during the production and field constructions. The amount of fuel consumptions and $CO_2$ diffusions can be reduced by much using the polymer-modified warm asphalt mixture instead of the conventional polymer-modified asphalt mixture. According to the research results, the polymer-modified warm asphalt mixture can be utilized without additional temperature increasement and performance sacrifice during the plant production and public service, respectively. As a result, it is considered that the application of the polymer-modified warm asphalt mixture has the potential of convenience in constructions management and reducing the environmental damages.

폴리머 개질 폐타이어 아스팔트 콘크리트의 특성 연구 (Evaluation of Waste Tire Rubber Asphalt Concrete using Polymer Modified Binders)

  • 김광우;이지용;오성균
    • 한국농공학회:학술대회논문집
    • /
    • 한국농공학회 1998년도 학술발표회 발표논문집
    • /
    • pp.180-185
    • /
    • 1998
  • The study was conducted to evaluate the fundamental properties of waste tire asphalt concretes using polymer modified hinder that were made by dry process. The specimens of four types of polymer modified asphalt concretes were prepared, then Marshall test and indirect tensile strength tests were performed on these samples. The results showed that polymer modified waste tire rubber asphalt concrete was acceptable for the material of asphalt pavement surface layer.

  • PDF

아스팔트 에멀젼을 혼입한 폴리머 시멘트 모르터의 특성에 관한 연구 (A Studyon the Properties of Polymer-Modified Mortar Using Asphalt Emulsion)

  • 전우성;송훈;조영국;소양섭
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 1997년도 가을 학술발표회 논문집
    • /
    • pp.375-380
    • /
    • 1997
  • The purpose of this study is to examine the properties of polymer-modified mortars using asphalt emulsion. The polymer-modified mortars using asphalt emulsion with various asphalt-cement ratios are prepared, and tested for flexural and compressive strengths, water absorption and permeability, carbonation, Cl ion penetration and chemical resistance. From the test results, the flexural and compressive strengths, water absorption and permeability, carbonation and Cl ion penetration depths of polymer-modified mortars using asphalt emulsion tend to be decreased with increasing asphalt-cement ratio, and chemical resistance is improved. It is evident that polymer-modified mortars using asphalt emulsion having an excellent properties as a waterproof and finish materials can be produced.

  • PDF

친환경형 중온 폴리머 개질 아스팔트 바인더의 상대적 물성 비교평가 (Relative Property Evaluation of Pro-Environmental Warm Polymer-Modified Asphalt Binder)

  • 김낙석;이진구
    • 한국재난정보학회 논문집
    • /
    • 제6권1호
    • /
    • pp.10-24
    • /
    • 2010
  • In this paper, warm asphalt binder was proposed as a substitute for the polymer-modified asphalt binder to get higher viscosity than that of the polymer-modified at the same temperature. Performance grade test and rotational viscosity of warm asphalt binder were conducted to evaluate the property variations due to the addition of admixture. Research results showed that the viscosity of warm asphalt binder at $100^{\circ}C$ was similar to that of the conventional asphalt binder. The performance and durability of warm asphalt binder were also comparable to those of the polymer-modified. It is considered that the active applications of warm asphalt binder can reduce environmental damages due to less diffusions of carbon dioxide compared to the conventional.

긴급보수용 개질 유화아스팔트 고비율 순환골재를 사용한 상온 아스팔트 혼합물의 성능 평가 (Performance Evaluation of High-RAP Asphalt Mixtures using Rapid-Setting Polymer-Modified Asphalt Emulsion)

  • 권봉주;허재민;한용진;이석근
    • 한국도로학회논문집
    • /
    • 제17권2호
    • /
    • pp.21-30
    • /
    • 2015
  • PURPOSES : The purpose of this study was to evaluate the performance of rapid-setting polymer-modified asphalt mixtures with a high reclaimed asphalt pavement (RAP) content. METHODS: A literature review revealed that emulsified asphalt is actively used for cold-recycled pavement. First, two types of rapid-setting polymer-modified asphalt emulsion were prepared for application to high-RAP material with no virgin material content. The quick-setting polymer-modified asphalt mixtures using two types of rapid-setting polymer-modified asphalt emulsion were subjected to the following tests: 1) Marshall stability test, 2) water immersion stability test and 3) indirect tensile strength ratio test. RESULTS AND CONCLUSIONS : Additional re-calibration of the RAP was needed for laboratory verification because the results of analyzing RAP aggregates, which were collected from different job sites, did not deviate from the normal range. The Marshall stability of each type of binder under dry conditions was good. However, the Type B mixtures with bio-additives performed better in the water immersion stability test. Moreover, the overall results of the indirect tensile strength test of RAP mixtures with Type B emulsions exceeded 0.7. Further research, consisting of lab testing and on-site application, will be performed to verify the possibility of using RAP for minimizing the closing of roadways.

폴리머 개질 아스팔트 콘크리트의 푸아송비에 관한 실험적 연구 (Evaluation of Poisson's Ration of Polymer-Modified Asphalt Concretes)

  • 김광우
    • 한국농공학회지
    • /
    • 제41권5호
    • /
    • pp.104-105
    • /
    • 1999
  • This study was performend to examine Poisson's ration of polymer-modified asphalt concrete due to temperature variatino . Asphalt binder used in this study was an AC85-100, penetration grade of 85-100, and polymer for modifying asphalt were domestic LDPE(Low-density polyethylene) and SBS(Styrene-butadiene-styrene). Aggregate was a crushed gneiss which was most widely used in the middle part of Korea. Using these materias, asphalt mixture slab(340mm$\times$240mm$\times$80mm) with optimum asphalt content from mix design was made and cut into square pillar (80mm$\times$80mm$\times$160mm). Poisson's ration was measured in various temperture (-15$^{\circ}C$, -1$0^{\circ}C$, -5$^{\circ}C$,$0^{\circ}C$,5$^{\circ}C$,1$0^{\circ}C$ and 2$0^{\circ}C$) under the load of one axis repeated compression mode. Poisson's ration of normal asphalt polymer modified asphalt mixtures in normal temperatures. This indicated that AP mixture was more susceptible to temperature effects. From regression aalysis of experimental results, the difference of Poisson's ration between normal and low temperature showed that polymer modified asphalt mixture were lower than AP mixture except for SBS modified asplat mixture.

  • PDF

택코트용 폴리머 개질 유화아스팔트 개발 및 성능 평가 (Development and Evaluation of Polymer-Modified Asphalt Emulsions Used for Tack Coats)

  • 김영민;임정혁;황성도
    • 한국도로학회논문집
    • /
    • 제17권2호
    • /
    • pp.39-46
    • /
    • 2015
  • PURPOSES: The objectives of this study were to develop a new polymer-modified emulsion for application to tack coats and to evaluate its properties by comparing it with other types of asphalt emulsions, with the goal of providing an enhanced tack coat material for use in construction. METHODS: Modified asphalt binders were developed from using SBS and SBR latex in the laboratory, and their fundamental properties, such as their penetration index and PG grade, were evaluated. Based on the properties, a new tack coat material was developed. To evaluate the newly developed asphalt emulsion, the bonding strength between the two layers of HMA was measured by applying a uniaxial tensile test and shear test. For the tests, a total of four different conditions were applied to the specimens, including the developed asphalt emulsion, latex modified asphalt emulsion, conventional asphalt emulsion, and non-tack coating. RESULTS AND CONCLUSIONS: Overall, the developed asphalt emulsion exhibits the best bonding strength behavior among all of the three types. Also, the two types of polymer-modified emulsions were found to be better for application for use as a tack coat than a conventional emulsion. Especially, at a high temperature ($50^{\circ}C$), the conventional asphalt emulsion no longer acts as a tack coating material. Therefore, the polymer-modified emulsion should be considered for application to tack coat construction during the summer.

Mechanical Properties and Durability of Asphalt Emulsion-Modified Cement Mortars

  • Song Hun;Do Jeong-Yun;Soh Yang-Seob
    • 콘크리트학회논문집
    • /
    • 제17권3호
    • /
    • pp.467-472
    • /
    • 2005
  • Asphalt emulsion is manufactured by the emulsification of asphalt, and is considered as an energy-saving, ecologically safe material because it does not need any heating processes with gas emission and fire hazard in its use. This study is concerned with evaluating the feasibility of the use of an asphalt emulsion as a poly-meric admixture. Asphalt-modified mortars using an experimentally manufactured asphalt emulsion were prepared with various polymer-cement ratios, and tested far the mechanical properties such as strengths and adhesion and the properties related to durability such as water absorption, permeation, carbonation and chloride ion penetration. As a result, the waterproofness, carbonation resistance and chloride ion penetration resistance of the asphalt-modified mortars were markedly improved with an increase in the polymer-cement ratio, but their compressive strength and adhesion to mortar substrates were reduced with increasing polymer-cement ratio. Therefore, it is recommended to control their polymer-cement ratio to be $10\%$ or lower in their practical applications. Further study to improve their compressive strength and adhesion is needed.

폴리올레핀-아스팔트 에멀젼의 안정화 메카니즘 1. Chlorinated Polyethylene으로 개질된 아스팔트의 온도 의존성 (Stabilization Mechanisms in Polyolefine-Asphalt Emulsions 1. Temperature Susceptibility of Chlorinated Polyethylene-Modified Asphalts)

  • 이진국
    • 공업화학
    • /
    • 제5권3호
    • /
    • pp.537-546
    • /
    • 1994
  • 고분자로써 개질을 시킨 아스팔트의 물리적 특성은 여러 가지 매개변수에 의존한다. 예를 들어 고분자의 특성, 고분자의 사용량 및 아스팔트의 물성 등에 의하여 좌우된다. 본 연구의 목적은 고분자로써 개질된 아스팔트의 온도 의존성을 고찰하는데 있다. 아스팔트는 연질의 200/300과 경질의 85/100 2가지 종류를 사용하였으며 개질을 위한 고분자는 염화 폴리에틸렌으로 플라스틱 성질을 갖는 Tyrin 2552와 탄성체 성질을 갖는 Tyrin CM0730 2가지 종류를 사용하였다. 온도에 대한 의존성은 아스팔트나 고분자로 개질된 아스팔트의 특성을 결정하는 기본적인 요인 중 하나이다. 따라서 온도의존성은 penetration index(PI)와 penetration-점도수(PVN) 등의 지수에 의하여 결정되어지는데 이들 지수들은 개질된 아스팔트의 penetration과 점도를 측정하여 이론식에 대입하여 계산함으로서 얻었다. 2종류의 아스팔트는 개질을 위한 고분자를 첨가하였을 경우 PI와 PVN이 동시에 증가하였다. 그리고 Plastomer로 개질시킨 아스팔트에 비하여 PI및 PW이 더 큰 값을 나타내었다. 아울러 연질의 아스팔트가 경질의 아스팔트에 비하여 온도 의존성이 더 큰 것으로 나타났다.

  • PDF