• 폴리머
• /
• 제30권1호
• /
• pp.22-27
• /
• 2006

상호에스테르 교환반응에 의한 폴리(에틸렌 나프탈레이트)/폴리(부틸렌 테레프탈레이트) (PEN/PBT) 블렌드의 물성 변화에 대하여 살펴보았다. PBT를 PEN에 블렌딩하는 경우 상대적으로 낮은 PBT의 용융점도에 의하여 PEN의 용융점도가 감소됨을 확인할 수 있었으며 PEN과 PBT의 상호에스테르 교환반응에 의하여 추가적인 용융점도 감소가 있음을 알 수 있었다. 윤활제로 calcium stearate(CaST)를 첨가하면 CaST는 윤활제로서의 역할과 함께 PEN과 PBT의 상호에스테르 교환반응을 촉진하는 역할을 하여 용융점도가 현저하게 감소됨을 확인하였다. 상호에스테르 교환반응을 이용한 반응 용융가공은 PEN과 PBT그리고 이들 블렌드의 분자량을 감소시키며 그 결과 기계적 물성 감소를 초래함을 확인할 수 있었다.

• 한국건축시공학회지
• /
• 제8권5호
• /
• pp.85-91
• /
• 2008

Prepacked concrete has recently been used in the special constructions fields such as underwater concrete work, heavy-weight concrete work, underground structure work, partial repair works for damaged reinforced concrete structures. and polymer-modified mortars have been employed as grouting mortars for the prepacked concrete. The purpose of this study is to recommend the optimum mix design of polymer-modified grouting mortars for prepacked concrete. Polymer-modified mortars using SBR and EVA emulsions as admixture of grouting mortars for prepacked concrete are prepared with various mix proportions such as sand-binder ratio, fly ash replacement ratio, polymer-binder ratio. and tested for flowability, viscosity of grouting mortars, bleeding ratio, expansion ratio, flexural and compressive strengths of grouting mortars and compressive and tensile strengths of prepacked concretes. From the test results, it is apparent that polymer-modified mortars can be produced as grouting mortars when proper mix design is chosen. We can design the mix proportions of high strength mortars for prepacked concrete according to the control of mix design factors such as type of polymer, polymer-binder ratio, sand-binder ratio and fly ash replacement ratio. Water-binder ratio of plain mortars for a constant flowability value are in the ranges of 43% to 50%. SBR-modified mortar has a little water-binder ratios compared to those of plain mortar, however, EVA-modified mortar needs a high water-binder ratio due to a high viscosity of polymer dispersion. The expansion and bleeding ratios of grouting mortars are also controlled in the proper value ranges. Polymer-modified grouting mortars have good flexural. compressive and tensile strengths, are not affected with various properties with increasing fly ash replacement to cement and binder-sand ratio. In this study, SBR-modified grouting mortar with a polymer-binder ratio of 10% or less, a fly ash replacement of 10% to cement and a sand-binder ratio of 1.5 is recommended as a grouting mortar for prepacked concrete.

• 공업화학
• /
• 제3권1호
• /
• pp.81-87
• /
• 1992

폴리에틸렌에 아라미드단섬유를 보강시킨 복합재료를 roll mill을 사용하여 제조하였다. 섬유배향과 물리적 성질의 이방성을 주사전자현미경과 인장시험기로, 유변특성을 RDS 를 사용하여 측정하였다. 섬유의 배향은 roll 작업으로 어느 정도 이루어 졌으며, 섬유 loading 이 증가할수록 기계적강도의 이방성도 증가하였다. 섬유 loading 에 따른 복합점도의 상승은 저주파수 영역에서 뚜렷이 관찰되었으며, 특히 섬유 loading 이 작은 범위에서 현저하였다.

• 한국재료학회지
• /
• 제28권2호
• /
• pp.82-88
• /
• 2018

Stable slurries of YSZ in aqueous suspension with added polymer dispersants, namely, poly-methacrylic acid ammonium salt (PMMA), poly-acrylic acid (PAA) and poly-acrylic-co-maleic acid (PAMA), were mixed with the monomolecular dispersants citric acid and oxalic acid. The dispersion properties of the suspension were investigated using PSA, viscosity, sedimentation, and FT-IR. The polymer dispersants and monomolecular dispersants were attached to the YSZ surface by the carboxylic group, as shown by the FTIR results. A stabilized aqueous suspension was obtained when the polymer dispersant and citric acid were mixed and compared to the use of citric acid alone as a dispersant agent. When the polymer dispersant and citric acid were mixed and milled through attrition milling, there was a smaller particle size compared to when the polymer dispersant alone was used as a dispersant agent. This study determined that the particle size of the mixed dispersant was affected by the properties of the monomolecular dispersant and that the stability of the suspension was affected by the polymer dispersant. However, when slurries of YSZ were mixed with oxalic acid, the particle bridging behavior was the result of the high degree of viscosity and the small sedimentation height.

• Korea-Australia Rheology Journal
• /
• 제12권3_4호
• /
• pp.175-179
• /
• 2000

Rheological properties of chitosan solutions were investigated as a function of polymer concentration. The viscosity curves for chitosan solutions consisted of two distinct viscosity regions, the Newtonian zero-shear viscosity (η$_{0}$) region and the shear rate dependent apparent viscosity (η$_{app}$) region. The shear rate dependence of viscosity was more clearly observed at higher chitosan concentrations. The critical coil overlap parameter (C＊〔η〕) was determined to be approximately 3.2 from a plot of zero-shear specific viscosity η$_{sp,0}$ vs coil overlap parameter (C〔η〕), which was lower than C〔η〕4.0 reported for other random coil polysaccharides. It was also found that the slope of η$_{sp,0}$ vs C〔η〕 was 3.9 at concentrated C〔η〕>C＊〔η〕domain, while 1.2 at dilute C〔η〕$_{0}$ ${\gamma}$/${\gamma}$$_{0.8}$ relation.ion.n.n.

• 폴리머
• /
• 제28권3호
• /
• pp.239-244
• /
• 2004

윤활제 첨가에 따른 폴리(부틸렌 테레프탈레이트) [PBT]의 유변 특성 및 열 안정성 변화에 대하여 살펴보았다. 윤활제로 칼슘 스테아레이트 (CaST)와 아디프산 글리콜 폴리에스터 (AhGP)를 PBT에 첨가하는 경우 1 wt％ 첨가만으로도 용융 점도가 현저히 감소함을 알 수 있었다. 이러한 정도 감소는 AAGP의 경우, PBT 주사슬에 내부 윤활제로 그리고 CaST는 가공 기기 표면과의 윤활 특성을 향상시키는 외부 윤활제로 작용하여 발현되며, 아울러 윤활제에 의한 PBT분자량 감소에도 기인됨을 확인할 수 있었다. 또한 본 연구에서 사용한 윤활제는 PBT의 열 안정성을 저하시키는 요인으로 작용함을 알 수 있었으나 3 wt％ 이하의 CaST를 PBT에 적용하는 경우 열 안정성의 감소를 최소화 할 수 있었다. 이러한 결과로 부터 분자량 감소와 열 안정성 저하를 최소화하면서 동시에 점도를 낮출 수 있는 PBT윤활제로는 내부 윤활제보다는 외부 윤활제인 CaST가 적절함을 알 수 있었다.

• 한국의류학회지
• /
• 제38권3호
• /
• pp.372-385
• /
• 2014

Lignin is an abundant natural polymer in the biosphere and second only to cellulose; however, it is under-utilized and considered a waste. In this study, lignin was fabricated into nanofibers via electrospinning. The critical parameters that affected the electrospinnability and morphology of the resulting fibers were examined with the aim to utilize lignin as a resource for a new textile material. Poly(vinyl alcohol) (PVA) was added as a carrier polymer to facilitate the fiber formation of lignin, and the electrospun fibers were deposited on polyester (PET) nonwoven substrate. Eleven lignin/PVA hybrid solutions with a different lignin to PVA mass ratio were prepared and then electrospun to find an optimum concentration. Lignin nano-fibers were electrospun under a variety of conditions such as various feed rates, needle gauges, electric voltage, and tip-to-collector distances in order to find an optimum spinning condition. We found that the optimum concentration for electrospinning was a 5wt% PVA precursor solution upon the addition of lignin with the mass ratio of PVA:lignin=1:5.6. The viscosity of the lignin/PVA hybrid solution was determined as an important parameter that affected the electrospinning process; in addition, the interrelation between the viscosity of hybrid solution and the electrospinnability was examined. The solution viscosity increased with lignin loading, but exhibited a shear thinning behavior beyond a certain concentration that resulted in needle clogging. A steep increase in viscosity was also noted when the electrospun system started to form fibers. Consequently, the viscosity range to produce bead-free lignin nanofibers was revealed. The energy dispersive X-ray analysis confirmed that lignin remained after being transformed into nanofibers. The results indicate the possibility of developing a new fiber material that utilizes biomass with resulting fibers that can be applied to various applications such as filtration to wound dressing.

• Macromolecular Research
• /
• 제12권6호
• /
• pp.545-552
• /
• 2004

The long-term stability of sulfonic acid-containing polyimides has been investigated. The hydrolytic degradation of homopolyimide and the block copolyimide comprising $27\;mol\%$ of 2,2'-bis(trifluoromethyl)benzidine and $9\;mol\%$ of m-phenylenediamine (BTFMB27mPl0[7/(3+1)]), was quantified through viscosity measurements and FT-IR spectroscopic analyses. The viscosity decrease with respect to time and the degradation rate were similar. The degrees of degradation with respect to time under ambient conditions and at elevated temperature in water were monitored by FT-IR spectroscopy. A new absorption peak was observed at $1786\;cm^{-1},$ which we corresponds to the presence of anhydride end groups formed by hydrolytic scission of the imide rings.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 봄 학술발표회 논문집
• /
• pp.223-226
• /
• 2003

Due to the potential application to ultra-high strength fibers and excellent properties such as high mechanical properties, excellent thermal endurance and chemical stability, thermotropic liquid crystal polymers (TLCPS) are attractive in recent years [1, 2]. Furthermore, the melt blends of TLCPS and conventional thermoplastics have been extensively investigated because of their easy processing and high performance [3-6]. Since high performance polymers generally has high melt viscosity, introduction of the relatively low viscosity components may be one of the more effective techniques to improve processability through the decrement of melt viscosity in melt processing. (omitted)

• 한국응용과학기술학회지
• /
• 제17권2호
• /
• pp.76-82
• /
• 2000

The relative reactivities of branched and linear polycarbonates were investigated by measuring unreacted chloroformate concentration. It was found that the polymerization for the branched polymer proceeded ca. 10 times faster than that for the linear polymers. The effect of catalyst on a condensation step was studied by changing the amount of TEA (triethylamine) at $t_{0}$ and $t_{60}$ with keeping constant amount of TEA. The viscosity average molecular weight for the obtained branched polycarbonates were measured and compared with those of linear polycarbonates. It was found that the viscosity molecular weights of the obtained polymers decreased nonlinearly as wt % of added oligomer increased. The solution viscosities in methylenechloride for linear and branched polycarbonate increased nonlinearly as the content of polymer increased.