• 한국도로학회논문집
• /
• 제4권4호
• /
• pp.53-66
• /
• 2002

아스팔트는 노화에 따라 물리적 특성변화가 일어난다. 하지만 같은 수준으로 노화시킨 아스팔트 혼합물들임에도 골재와 결합재 등에 따라 서로 다른 강성이나 취성을 보인다. 이는 노화에 의한 바인더 특성 변화의 차이에 기인한 것인데 이와 같이 혼합물 내에서 바인더의 물리적 특성 변화 차이에 영향을 주는 요인에 대한 연구는 별로 없다. 따라서 본 연구에서는 아스팔트 혼합물의 노화 후추출한 바인더의 물리적 특성을 측정하고 물성 차이에 영향을 미치는 요인을 분석하였다. 폴리머 3종류와 골재 두 종류, 두 가지 입도, 두 종류의 아스팔트를 사용하여 32종류의 혼합물을 제조하고, 이를 장 단기 노화 처리하였다. 각 혼합물의 노화 후 Abson recovery 방법으로 바인더를 추출 회생하고 바인더 물성 시험(침입도, 동점도, 절대점도)을 수행하였다. 이를 SAS를 이용하여 통계 분석하였다. 바인더 시험에서 골재 종류와 폴리머가 노화시 물성변화에 차이를 가져오는 심각한 요인임을 알 수 있었고, 입도는 점도 변화에 큰 영향을 미치는 인자인 것임을 확인할 수 있었다. 본 연구 결과, 혼합물 내의 바인더 물성은 골재 종류, 입도, 개질제의 종류, 바인더의 종류 등의 다양한 요인에 의해 많은 영향을 받는 다는 것을 알 수 있었다.

• 폴리머
• /
• 제39권3호
• /
• pp.403-411
• /
• 2015

A series of hydrophobically associating fluorinated amphiphilic polyacrylamide copolymers with remarkably high heat resistance and salt tolerance were synthesized by free radical micellar copolymerization, using acrylamide (AM) and sodium 2-acrylamido-tetradecane sulfonate ($AMC_{14}S$) as amphiphilic monomers, and 2-(perfluorooctyl) ethyl acrylate (PFHEA) as hydrophobic monomer. The structure of the terpolymer was characterized by FTIR, $^1H$ NMR and $^{19}F$ NMR. The solution properties of the terpolymers were investigated in details, and the results showed that the terpolymer solution had strong intermolecular hydrophobic association as the concentration exceeded the critical association concentration 1.5 g/L. The terpolymer solution possessed high surface activity, viscoelasticity, excellent heat resistance, salt tolerance and shearing resistance. The viscosity retention rate of copolymer solution was as high as 59.9% under the condition of fresh wastewater, $85^{\circ}C$ and a 60-days aging test.

• 대한기계학회논문집B
• /
• 제39권4호
• /
• pp.379-384
• /
• 2015

최근 전기방사를 이용한 프린팅이 미세 패터닝 분야에 응용이 되고 있다. 전기방사를 이용한 패터닝은 연속 프린팅 방식으로 기존의 요구적출형 방식에 비해 패터닝 속도가 빠르다는 장점이 있다. 안정적인 연속 프린팅을 위해서는 고분자의 폴리머를 프린팅하려고 하는 잉크에 혼합하는 것이 필요하다. 본 연구에서는 PEO 를 이러한 첨가 폴리머로 사용하였다. 이러한 폴리머의 첨가에 대한 잉크의 점도 및 Taylor cone 형성에 대해 미치는 영향을 조사하였다. 마지막으로 전기방사 프린팅의 예로서 실버 페이스트 잉크를 유리 기판 위에 패터닝하였다.

• Fibers and Polymers
• /
• 제5권2호
• /
• pp.122-127
• /
• 2004

In this study, we evaluated the effect of the molecular weight of the polymer on electrospun poly(ethylene terephthalate) (PET) nonwovens, and their mechanical properties as a function of the linear velocity of drum surface. Polymer solutions and electrospun PET nonwovens were characterized by means of viscometer, tensiometer, scanning electron microscope(SEM), wide angle X-ray diffraction measurement (WAXD) and universal testing machine (UTM). By keeping the uniform solution viscosity, regardless of molecular weight differences, electrospun PET nonwovens with similar average diameter could be obtained. In addition, the mechanical properties of the electrospun PET nonwovens were strongly dependent on the linear velocity of drum surface. From the results of the WAXD scan, it was found that the polymer took on a particular molecular orientation when the linear velocity of drum surface was increased. The peaks became more definite and apparent, evolving from an amorphous pattern at 0 m/min to peaks and signifying the presence of crystallinity at 45 m/min.

• Korea-Australia Rheology Journal
• /
• 제18권3호
• /
• pp.153-160
• /
• 2006

We analyzed the non-Newtonian and non-isothermal flow with Carreau-Yasuda viscosity model in co-rotating and counter-rotating twin screw extruder systems. The mixing performances with respect to the screw speed, the screw pitch, and the rotating direction have been investigated. The dynamics of mixing was studied numerically by tracking the motions of particles. The extent of mixing was characterized in terms of the deformation rate, the residence time distribution, and the average strain. The results showed that the high screw speed decreases the residence time but increases the deformation rate. Small screw pitch increases the residence time. It is concluded that the high screw speed increases the dispersive mixing performance, while the small screw pitch increases the distributive mixing performance. Co-rotating screw extruder has the better conveying performance and the distributive mixing performance than counter-rotating screw extruder with the same screw speed and pitch. Co-rotating screw extruder developed faster transport velocity and it is advantageous the flow characteristics to the mixing that transfers polymer melt from one barrel to the other barrel.

• 폴리머
• /
• 제24권1호
• /
• pp.113-123
• /
• 2000

Poly(p-hydroxybenzoate) (PHB)/poly(ethylene terephthalate) (PET) 8/2공중합 폴리에스테르계 액정고분자와 poly(ethylene 2,6-naphthalate) (PEN) 및 poly(ethylene terephthalate)를 용융혼합하여 삼상계 블렌드물의 액정상 형성여부 및 기계적 성질을 조사하였다. PHB의 함량이 40 mo1%에서 급격한 점도의 감소로 토크의 값이 감소하였고, 인장강도와 초기 탄성율은 PHB의 함량이 증가함에 따라 액정고분자의 피브릴 형성으로 증가하였다. 섬유의 인장강도와 탄성율은 PHB의 함량과 권취속도를 증가시킴에 따라 증가하였고, 에스테르 교환반응은 용융혼합 시간에 따라 증가하였다. 에스테르 교환반응은 용융흔합물의 흔화성을 향상시키고, 동일 조성비의 단량체를 함유한 공중합체에서 나타나는 액정상을 형성하였다. PHB의 함량이 30 wt%에서는 부분적인 액정상이 나타나며, 40 wt%에서 삼상계 블렌드의 의사액정상이 나타났다.

• 공업화학
• /
• 제7권3호
• /
• pp.536-542
• /
• 1996

본 연구에서는 유화중합을 통해 water jet loom용 경사 호제인 비용제형 수용성 아크릴 호제(GSW-7000)를 합성하였다. 이 호제는 아크릴계 호제의 암모늄염 형태로 제조되어 weaving force에 대한 저항력과 water jet loom 사용에 있어 물에 대한 저항력이 우수하였다. 제조한 GSW-7000은 sizing에 적당한 점도를 가지고 있고, 신도와 접착력, 용해성, 침투성 및 호부착성이 우수하였다. 또한 본 호제로 처리된 호부사는 접착강도가 높아 기존 용제형 아크릴 호제에 비하여 sizing시 호제 소모량을 70~80% 수준으로 저하시켜도 우수한 집속성 및 포합력을 나타내었으며, 호피막이 유연하며 평활성 및 내마모성이 우수하여 호부시 유제 및 대전 방지제를 사용하지 않아도 sizing 및 제직이 가능하였다.

• Macromolecular Research
• /
• 제12권3호
• /
• pp.303-310
• /
• 2004

We have prepared an aqueous dispersion of poly(aniline-dodecyl benzene sulfonic acid complex) (PANI-DC) that has an intrinsic viscosity (〔η〕) near 1.3 dL/g using aniline as a monomer, dodecyl benzene sulfonic acid(DBSA) as a dopant/emulsifier, and ammonium peroxodisulfate(APS) as an oxidant. We found that the electrical conductivity of a PANI-DC pellet was 0.7 S/cm. A waterborne-polyurethane (WBPU) dispersion, obtained from isophorone diisocyanate/polytetramethylene oxide glycol/dimethylol propionic acid/ethylene diamine/triethylene amine, was used as a matrix polymer. We prepared blend films of WBPU/PANI-DC with variable weight ratios (from 99/1 to 66/34) by solution blending/casting and investigated the effects that the PANI-DC content has on the mechanical and dynamic mechanical properties, hardness, electrical conductivity, and antistaticity of these films. The tensile strength, percentage of elongation, and hardness of WBPU/PANI-DC blend films all decreased markedly upon increasing the PANI-DC content. The antistatic half-life time ($\tau$$\sub$$\frac{1}{2}$/) of pure WBPU film was about 110 s, but we found that those of WBPU/ultrasound-treated PANI-DC blend films decreased exponentially from 1.2 s to 0.1 s to almost 0 s upon increasing the PANI-DC content from 1 wt% to 15 wt% to > 15 wt%, respectively.

• Macromolecular Research
• /
• 제14권3호
• /
• pp.331-337
• /
• 2006

In the present study we investigated the relationship between the morphology and mechanical properties of electrospun polysulfone (PSF)/polyurethane (PU) blend nonwovens, by using the electrospinning process to prepare three types of electrospun nonwovens: PSF, PU and PSF/PU blends. The viscosity, conductivity and surface tension of the polymer solutions, were measured by rheometer, electrical conductivity meter and tensiometer, respectively. The electrospun PSF/PU blend nonwovens were characterized by scanning electron microscopy (SEM) and with a universal testing machine. The SEM results revealed that the electrospun PSF nonwoven had a structure consisting of cross-bonding between fibers, whereas the electrospun PU nonwoven showed a typical, point-bonding structure. In the electrospun PSF/PU blend nonwovens, the exact nature of the point-bonding structure depended on the PU contents. The mechanical properties of the electrospun PSF/PU blend nonwoven were affected by the structure or the morphology. With increasing PU content, the mechanical behaviors, such as Young's modulus, yield stress, tensile strength and strain, of the electrospun PSF/PU blend nonwovens were by up to 80%.

• 한국염색가공학회지
• /
• 제32권1호
• /
• pp.19-26
• /
• 2020

The previous study reported that the quaternary copolymer of MMA, BA, MAA, and NEA was expected to be a good monomer composition for a binder polymer with good rubbing fastness for digital textile printing(DTP) pigment ink. However, the rubbing fastness of the dyed fabric with the quaternary copolymer binder containing pigment ink is not enough to be commercially used. Therefore, this study aims to optimize MMA:BA:MAA:NEA composition for improved rubbing fastness. And the binder polymer with various MMA:BA:MAA:NEA compositions were synthesized using miniemulsion polymerization. The particle size, viscosity, molecular weight, and Tg of the synthesized binder were evaluated. And the color strength and rubbing fastness of the black pigment ink dyed cotton fabrics with the prepared binders were also evaluated. Then, the stiffness of undyed and dyed cotton fabrics were evaluated to investigate the changes in touch as the binder structure changes.