• Macromolecular Research
• /
• 제17권11호
• /
• pp.879-885
• /
• 2009

A macroazoinitiator (MAI) containing a poly(ethylene glycol) (PEG) segment was intercalated in the gallery of sodium montmorillonite (Na-MMT). Acrylic monomers were polymerized using this MAI intercalated in Na-MMT to prepare the acrylic copolymer nanocomposite (AN), which is a multiblock copolymer composed of two segments, an acrylic copolymer and PEG intercalated in Na-MMT (Na-MMT/PEG). When AN was used to modify the reactive hot melt polyurethane adhesive (RHA), the acrylic copolymer segment and Na-MMT/PEG synergistically enhanced the initial bond strength evolution and reduced the set time, even when the amount of Na-MMT in RHA was < 1 wt%. The viscosity of RHA increased and the tensile properties of the cured RHA film decreased due to modification with AN. These variations were more evident as the Na-MMT content in AN was increased.

• 반도체디스플레이기술학회지
• /
• 제18권1호
• /
• pp.42-47
• /
• 2019

The four different polymer compounds were manufactured to make cable sheath for ship industry. Two kinds of ethylene-vinyl acetate (EVA) were selected as main matrix polymers for compounding with fire retardant, crosslinking agent, filler, plasticizer, and other additives. The properties of the four compounded materials were investigated with the contents of fire retardant, silane coated aluminum hydroxide (S-ATH). Rheology, Mooney viscosity, and tensile strength increased with S-ATH contents by reinforcing effect. With increasing fire retardant amount, fire resistance increased, but cold resistance didn't show an obvious enhancement due to polar effect of vinyl acetate in EVA.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.227-227
• /
• 2006

It was attempted to synthesize polyimides from PPMDA and 3FPPMDA with mDAPPO/pPDA in order to afford CTE of 17ppm and adhesion property of 80g/mm, besides high Tg (>$300^{\circ}C$), good thermal stability (>$500^{\circ}C$), low water absorption and good solubility. The polyimides were prepared via a conventional two-step process; preparation of poly(amic-acid), followed by solution imidization by refluxing in NMP with o-DCB and the molar ratio of mDAPPO/pPDA was varied. The polyimides were characterized by FT-IR, NMR, DSC and TGA. In addition, intrinsic viscosity, solubility and coefficient of thermal expansion (CTE) were also measured.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1998년도 봄 학술발표회 논문집
• /
• pp.14-19
• /
• 1998

Increasing demand for high modulus high strength polymeric materials have drawn considerable interest in industry. Thermotropic liquid crystal polymers (TLCP), differing from lyotropic liquid crystal polymers, have excellent melt processability and mechanical property resulting from the high degree of molecular orientation under a shear flow field in the molten state with relatively low viscosity$\^$1,2/.(omitted)

• 폴리머
• /
• 제25권1호
• /
• pp.71-77
• /
• 2001

불포화 폴리에스테르 수지(unsaturated polyester,UP)는 대표적인 열경화성 수지로 점도가 낮아 다양한 복합재료 공정을 용이하게 이용할 수 있어 범용 복합재료 수지로 많이 쓰이고 있다. 그러나 UP는 경화 후 부피가 5-8%정도 감소하고 알칼리에 약하며 brittle하다는 결점을 가지고 있다. 이러한 문제점들을 해결하기 위해 다양한 종류의 첨가제와의 블렌딩을 통하여 해결하려는 연구들이 수행되어지고 있다. 본 연구에서는 UP말단에 폴리우레탄(polyurethane, PU)을 도입하여 강인성을 향상시키고 이때 폴리우레탄의 soft segment인 폴리올이 UP/PU 고분자 네트워크 혼합체의 강인성에 미치는 영향을 살펴보았다. UP 말단 히드록실기에 메틸디이소시아네이트(methyldiisocyanate, MDI)를 먼저 반응시킴으로써 PU를 UP말단에 도입할 수 있었다. UP에 대한 PU의 함량이 2 wt%일 때가 가장 높은 강인성 값을 보였다. 이는 UP와 PU의 결합에 의한 효과이며 그 이상일 때 강인성 값들이 감소하는 것은 미반응물로 존재하는 폴리올 때문인 것으로 보여진다. 그리고 폴리올의 분자량이 증가할수록 분자의 움직임이 떨어지게 되어 충분히 반응에 참여하지 못하기 때문에 강인성 값은 떨어지는 것으로 나타났다.

• Journal of Pharmaceutical Investigation
• /
• 제20권3호spc1호
• /
• pp.51-76
• /
• 1990

It is sometimes said lately that the pH of the human gastric juice is significantly different among individuals. Thus, the dissolution behavior of coated solid dosage forms should preferably be independent of the pH of the test solution. With these points as a background, the effect of pH on the dissolution velocity of coated tablets was studied to compare that of Pharmacoat with other gastric soluble film coating materials. Three viscosity types of Pharmacoat have been available(3, 6 and 15cP) until now. the 6cP type has been considered to be the most suitable for a tablet coating amongst the three types. The 3 cP type with a low degree of polymerization, is capable of providing high concentration, but the film strength is so inferior that sometimes cracking of the film may occur. On the other hand, in the case of the 15cP type, high polymer concentration cannot be achieved because of the high dgree of polymerization, and thus it is uneconomical for coating. Now, there is a strong demand to reduce the coating time even when HPMC is used in the 6cP type in order to reduce the coating cost. In order to improve this problem, we have concentrated our attention on reducing the viscosity value of HPMC to an allowable lower limit from 6cP. As a result of this study, it was found that the reduction of the viscosity value to around 4.5cP enabled the use of a higher solution concentration and an incidental shorter coating time without giving any substantial adverse effects on the properties of coated preparations. These experiment results are presented in the later part of this presentation. Based on this study, we have added the viscosity type of 4.5cP as one of the Pharmacoat products as Pharmacoat-645.

• 한국세라믹학회지
• /
• 제56권4호
• /
• pp.360-364
• /
• 2019

PZT suspensions for photo-curable 3D printing were fabricated and their characteristics were evaluated. After mixing the PZT, photopolymer, photo-initiator, and dispersant for 10 min by using a high-shear mixer, the viscosity characteristics were investigated based on the powder content. To determine an appropriate dispersant content, the dispersant was mixed at 1, 3, and 5 wt% of the powder and a precipitation test was conducted for two hours. Consequently, it was confirmed that the dispersibility was excellent at 3 wt%. Through thermogravimetric analysis, it was confirmed that weight reduction occurred in the photopolymer between 120? and 500?, thereby providing a debinding heat treatment profile. The fabricated suspensions were cured using UV light, and the polymer was removed through debinding. Subsequently, the density and surface characteristics were analyzed by using the Archimedes method and field-emission scanning electron microscopy. Consequently, compared with the theoretical density, an excellent characteristic of 97% was shown at a powder content of 87 wt%. Through X-ray diffraction analysis, it was confirmed that the crystallizability improved as the solid content increased. At the mixing ratio of 87 wt% powder and 13 wt% photo-curable resin, the viscosity was 3,100 cps, confirming an appropriate viscosity characteristic as a stereolithography suspension for 3D printing.

• Fibers and Polymers
• /
• 제6권2호
• /
• pp.103-107
• /
• 2005

An attempt was made to correlate the polymerization temperature and rheological and thermal properties of acrylonitrile (AN)-acrylamide (AM) copolymers. The copolymers were synthesized at different polymerization temperature. The copolymer structure was characterized by gel permeation chromatography (GPC) and Infrared spectrum (IR). The rheological and thermal properties were investigated by a viscometer and differential scanning calorimeter-thermogrametric (DSC-TG) analysis, respectively. When the polymerization temperature increased from $41^{\circ}C\;to\;65^{\circ}C$, the molecular weight $(\bar{M}_w)$ of copolymers decreased from 1,090,000 to 250,000, while its conversion increased from $18\%\;to\;63\%$, and the polymer composition changed slightly. To meet the requirements of carbon fibers, the rheological and thermal properties of products were also investigated. It was found that the relationship between viscosity and $\bar{M}_w$ was nonlinear and the viscosity index (n) decreased from 3.13 to 2.69, when the solution temperature increased from $30^{\circ}C\;to\;65^{\circ}C$. This suggests the dependence of viscosity upon $\bar{M}_w$ is higher at lower solution temperature. According to the result of activation energy, the sensivity of viscosity to solution temperature is higher for AN-AM copolymers synthesized at higher polymerization temperature. The result of thermal analysis shows that the copolymers obtained at higher polymerization temperature are easier to cyclization evidenced from lower initiation temperature. The weight loss behavior changed irregularly with polymerization temperature due to irregular change of liberation heat.

• 대한화학회지
• /
• 제20권2호
• /
• pp.158-165
• /
• 1976

N,N'-Adipyl-bis-${\varepsilon}$-caprolactam을 개시제로 potassium hydroxide를 촉매로 하여 여러 가지 중합조건에서 ${\varepsilon}$-caprolactam의 음이온 중합을 시도하였다. 중합최적조건은 촉매와 개시제의 농도가 각각 4.2와 1.6 mole%, 중합온도 130$^{\circ}C$, 중합시간 1.5시간 일때이었다. 얻어진 중합체의 intrinsic viscosity는 0.9 dl/g, 분자량 12,000이상이었고 융점은 219$^{\circ}C$였다. Acyl type개시제의 반응성은 N,N'-adipyl-bis-${\varepsilon}$-caprolactam이 가장 크고 N-benzoyl-${\varepsilon}$-caprolactam, N-acetyl-${\varepsilon}$-caprolactam의 순서로 감소하였다. Intrinsic viscosity,와 중합변화율은 촉매와 개시제의 농도증가에 따라 증가하였으며 중합온도에 크게 의존하였다.

• 대한화학회지
• /
• 제24권2호
• /
• pp.155-166
• /
• 1980

3-(N-Carbonylpyrrolidone)-propanoic acid의 potassium-salt와 3-N-carbonyrrolidone)-propenoic acid의 potassium-salt를 합성하고 이것을 2-pyrrolidone 음이온중합의 개시제로 사용하여 그 효과를 조사하였다. $50^{\circ}C$에서 KOH의 농도를 2mole%로 고정시키고, 개시제를 1.5, 1.0, 0.5mole%로 변화시켰을때 1.0mole%에서 좋은 결과를 얻을 수 있었다. 3-(N-Carbonylpyrrolidone)propenoic acid K-salt/KOH catalysis에 의하여 합성한 nylon 4의 inherent viscosity는 2.3dl/g이였고 3-(N-carbonylpyrrolidone)-propanoic acid K-salt 개시제에 의하여 합성한 중합체의 ingerent viscosity는 1.2dl/g이었다.