• 대한세포병리학회지
• /
• 제9권2호
• /
• pp.187-191
• /
• 1998

Alveolar soft part sarcoma(ASPS) is a rare malignant neoplasm with a distinct clinicopathologic entity of which fine needle aspiration(FNA) cytologic findings have been described in only a few reports. Although patients usually present with an isolated soft-tissue mass in the extremity, metastasis can occur in about 13 % of total cases and the most frequent metastatic site is the lung. We have recently experienced a FNA cytologic case of ASPS in the lung. A 23-year-old female patient was admitted to this hospital due to 2-month-history of cough She had been good in health before the visit. Chest computed tomography revealed multiple, variable sized, bilateral pulmonary nodules. Physical examination and other staging work up revealed no other lesions except for pulmonary nodules. A percutaneous transthoracic FNA was performed from the pulmonary nodules. The smear was cellular and most cells were arranged singly. In addition, a few clusters lined by thin-walled vasculature with a pseudoalveolar pattern were present. Some of the tumor cells were large and polygonal lo oval with abundant granular or vacuolated cytoplasm. Most cells were naked nuclei showing finely granular chromatin pattern with prominent central nucleoli.

• Smart Structures and Systems
• /
• 제18권1호
• /
• pp.155-181
• /
• 2016

In the present paper we discuss the stability and the post-buckling behaviour of thin piezoelastic plates. The first part of the paper is concerned with the modelling of such plates. We discuss the constitutive modelling, starting with the three-dimensional constitutive relations within Voigt's linearized theory of piezoelasticity. Assuming a plane state of stress and a linear distribution of the strains with respect to the thickness of the thin plate, two-dimensional constitutive relations are obtained. The specific form of the linear thickness distribution of the strain is first derived within a fully geometrically nonlinear formulation, for which a Finite Element implementation is introduced. Then, a simplified theory based on the von Karman and Tsien kinematic assumption and the Berger approximation is introduced for simply supported plates with polygonal planform. The governing equations of this theory are solved using a Galerkin procedure and cast into a non-dimensional formulation. In the second part of the paper we discuss the stability and the post-buckling behaviour for single term and multi term solutions of the non-dimensional equations. Finally, numerical results are presented using the Finite Element implementation for the fully geometrically nonlinear theory. The results from the simplified von Karman and Tsien theory are then verified by a comparison with the numerical solutions.

• Journal of applied mathematics & informatics
• /
• 제7권2호
• /
• pp.493-506
• /
• 2000

Recently the first author and his coworker report a new finite element method for the Poisson equations with homogeneous Dirichlet boundary conditions on a polygonal domain with one re-entrant angle [7], They use the well-known fact that the solution of such problem has a singular representation, deduced a well-posed new variational problem for a regular part of solution and an extraction formula for the so-called stress intensity factor using tow cut-off functions. They use Fredholm alternative an Garding's inequality to establish the well-posedness of the variational problem and finite element approximation, so there is a maximum bound for mesh h theoretically. although the numerical experiments shows the convergence for every reasonable h with reasonable size y imposing a restriction to the support of the extra cut-off function without using Garding's inequality. We also give error analysis with similar results.

• Journal of Oral Medicine and Pain
• /
• 제3권1호
• /
• pp.3-10
• /
• 1977

Few changes were found in the mouths of 52 smokers were examined as a part of program to evaluate the oral health of Korean smokers. 52 smokers and 30 non-smokers were performed careful oral examination. In many of smokers, heavy, black deposits are found on the buccal and lingual surfaces of the teeth and leukoplakia were obsreved in 2 subjects and varied merely in the severity of the involvement. Cytologic studies were carried out on 60 oral smears from the hard palate, buccal mucosa, and gingiva. Smears were taken wit a wood spatula scraped over the mucosal surface. After fixation the slides were stained using the papanicolau cells without nuclei. The cornified cells were smaller than the noncornified cells and stained a deep brown or orange as compared with the blue or red of the large, round or polygonal cells in nonkeratinized regions of oral mucosa. Abnormal cell forms, suggestive of malignancy were not found in smears from the mucosa of smokers. Cells with large hyperchromatic nuclei and elongated, spindle-type cells with large nuclei were not observed.

• 한국산업융합학회 논문집
• /
• 제5권2호
• /
• pp.141-146
• /
• 2002

Stereolithography is the best known as rapid prototyping system. It uses the STL format data which is generated from CAD system. In this study, One of the main function of this developed CAM system deals with shape modification which divide a shape into two parts or more. The cross section of a STL part by a z-level is composed with nested or single polygonal closed loop. In order to make RP product, closed loops must fill with triangular facets from SSET and recover sliced triangular facets which is located normal direction to the cross sectional plane. The system is development by using Visuall C++ compiler in the environment of pentium PC. Operating system is Windows NT workstaion from Micro-Soft.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1994년도 추계학술대회
• /
• pp.101-103
• /
• 1994

The film scanner that digitizes the conventional x-ray films is the necessary equipment in the transition period of going to the filmless hospital. We have developed the film scanner using laser. We have selected HeNe laser as light source. The polygonal mirror converts the point light source to line scanning light. In sensing part, the diffusing cylinder and 7 photo transistors converts the light signal which passing the film into the electric signal. With this scanner, we can scan successfully the conventional x-ray film by $1024\times1024$. Smaller the spot sire is, higher the resolution can be achieved.

• Structural Engineering and Mechanics
• /
• 제7권3호
• /
• pp.289-302
• /
• 1999

An approximate method for analyzing the bending problems of irregular-shaped plates is proposed. In this paper irregular-shaped plates are such plates as plate with opening, circular plate, semi-circular plate, elliptic plate, triangular plate, skew plate, rhombic plate, trapezoidal plate or the other polygonal plates which are not uniform rectangular plates. It is shown that these irregular-shaped plates can be considered finally as a kind of rectangular plates with non-uniform thickness. An opening in a plate can be considered as an extremely thin part of the plate, and a non-rectangular plate can be translated into a circumscribed rectangular plate whose additional parts are extremely thin or thick according to the boundary conditions of the original plate. Therefore any irregular-shaped plate can be replaced by the equivalent rectangular plate with non-uniform thickness. For various types of irregular-shaped plates the convergency and accuracy of numerical solution by proposed method are investigated.

• 헤리티지:역사와 과학
• /
• 제53권1호
• /
• pp.126-149
• /
• 2020

1950~60년대부터 현재까지 남한과 북한의 구석기 고고학 연구는 서로 다른 궤적을 그리며 달려왔다. 수십 년간 서로 다른 가치의 구석기 연구를 해 온 남과 북이 서로를 이해하기 위해서는 인위적인 노력이 필요하다. 북한 구석기 고고학의 궤적을 살펴보기 위해서는 그 궤적이 놓인 정치·사회적 지형을 살펴볼 필요가 있다. 다시 말해서, 북한 구석기 고고학을 '읽기' 위해서는 문헌의 정보를 살피는 동시에 문헌의 밖을 보는 시도가 필요하다. 북한의 구석기 고고학을 읽는다는 것은 고고학적 연구와 함께 북한의 정치·사회적 특성을 연동하여 살핀다는 의미를 지닌다. 이를 위해서는 정치적 메시지나 사회적 변혁에 따른 구석기 고고학의 변이를 관찰할 필요가 있다. 특히 '도서 정리 사업'이라는 정치·사회적 사건과 이에 따른 학술 자료 인용의 관계성은 대표적인 사례가 된다. 정치·사회적 일정과 관련하여 북한의 구석기를 읽기 위해서는 북한의 구석기 연구를 고고학적 자료와 같이 대하는 노력이 필요하다. 고고학적 자료를 각각의 속성으로 구분하여 연구하는 것과 마찬가지로, 1950~60년대 이후부터 현재에 이르는 북한의 구석기를 여러 속성으로 나누어서 볼 수 있다. 여러 속성, 즉 세부적인 연구 단위를 찾고 그 연구 단위의 변화를 읽어나가는 작업이 필요하다. 북한 구석기 연구 단위는 편년 연구, 사회 진화, 유물 조합, 인류 진화, 지질 환경으로 구분이 가능하다. 해당 다섯 가지 연구 단위의 세부적 내용은 변화하기 마련이다. 그 세부 연구 단위의 변화는 크게 1950~60년대 이후, 1970년대 이후 그리고 2000년대 이후로 나누어 관찰이 가능하다. 새로 조사된 고고 자료로써 각 연구 단위의 내용은 누적되는 방향으로 변화된다. 그런데 한편으로는 일종의 대응도 관찰된다. 각 연구 단위의 표지적 내용은 대체적으로 서로 대응되는 구조를 가지고 있다. 예를 들어 편년 연구의 특정 표지 개념은 인류 진화의 특정 표지 개념 그리고 사회 진화의 특정 표지 개념과 대응이 된다. 그 대응을 살펴보면 마치 잘 짜인 오면체 구조와 같은 모습을 보인다. 각각의 연구 단위가 서로 공고히 연결될 수 있게 하는 연결의 특징도 관찰된다. 이를 가능케 하는 중심 주제는 핏줄로 대표되는 민족주의라고 할 수 있다. 북한의 초기 구석기 연구를 벗어나 '조선민족' 개념의 확산 이후, 기원, 계승, 계통은 구석기 연구에서도 중요한 담론으로 자리 잡게 된다. 이 담론을 담는 기능으로 각 연구 단위는 중요한 역할을 하고, 이를 충실히 이행하는데 있어 연구 단위는 서로 공고히 연결되어 있다.

• 한국생산제조학회지
• /
• 제20권3호
• /
• pp.342-349
• /
• 2011

The purpose of this paper is to describe experimental results about the butt welding and bead on plate welding of the high power Continuous Wave (CW) Fiber laser for Ultra-low carbon Interstitial Free(IF) steel plate for gear part of car. After being welded of the gear parts by the fiber laser and electron beam Microstructures of melting zone had been mixed acicular, granular bainitic, quasi-polygonal and widmanstatten ferrite because of a radical thermal diffusion after welding, difference of critical volume and grain size. As a result of experiment, when gear parts were welded by the fiber laser and electron beam, the fiber laser welding has been stable properties without internal defects more than the electron beam welding. Therefore it has the very advantages of welding high quality and productivity more than conventional melting method. The optimal welding processing parameters for gear parts were as follows : the laser power and welding speed were 3kWatt, 30mm/sec respectively. At this time heat input was $21.2{\times}10^3J/cm^2$.

• Journal of Welding and Joining
• /
• 제35권3호
• /
• pp.68-74
• /
• 2017

Characteristics of dissimilar metal welds between alloy steel ASTM A387 Gr. 91 and carbon steel ASTM A516 Gr.70 made with Flux cored arc welding(FCAW) have been evaluated in terms of microstructure, mechanical strength, chemical analysis by EDS as well as corrosion test. Three heat inputs of 15.0, 22.5, 30.0kJ/cm were employed to make joints of dissimilar metals with E71T-1C wire. Post-weld heat treatment was carried out at $750^{\circ}C$ for 2.5 h. Based on microstructural examination, Intragranular polygonal ferrite and grainboundary ferrite were formed only in first layer of weld metal. Another layers consisted of acicular ferrite and $Widmannst{\ddot{a}}tten$ ferrite. The amount of acicular ferrite was increased with decreasing heat input and layer. Heat affected zone of alloy steel showed the highest hardness due to the formation of tempered martensite and lower bainite. Lower and upper bainite were formed in heat affected zone of carbon steel. Tensile strengths of dissimilar metal welds decreased with increasing heat inputs. Dissimilar metal welds showed a good hot cracking resistance due to the low HCS index below 4. The salt spray test of dissimilar metals welds showed that the weight loss rate by corrosion below 170 hours was decreased with increasing heat inputs due to the increase of the amount of acicular ferrite.