• Fibers and Polymers
• /
• v.1 no.2
• /
• pp.83-91
• /
• 2000

Thermotropic liquid crystalline polymer made up of poly(p-hydroxybenzoate) (PHB)-poly(ethylene terephthalate)(PET) 8/2 copolyester, poly(ethylene 2,6-naphthalate) (PEN) and PET were mechanically blended to pursue the liquid crystalline phase of ternary blends. Complex viscosities of blends decreased with increasing temperature and PHB content. DSC thermal analysis indicated that glass transition temperature (Tg) and melting temperature (Tm) of blends increased with increasing PHB content. Both tensile strength and initial modulus increased with raising PHB content and take-up speed of monofilaments. In the WAXS diagram, only PEN crystal reflection at 2Θ=$15.5^{\circ}C$ appeared but PET crystal reflection was not shown in all compositions. The degree of transesterification and randomness of blends increased with blending time but sequential length of both PEN and PET segment decreased.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1535-1537
• /
• 2009

High performance resistive type touch panel was fabricated on flexible polyethylene terephthalate (PET) substrates coated with Al- and Ga-codoped ZnO (AGZO) films. The AGZO films were deposited by roll-to-roll direct current magnetron sputter at room temperature. The AGZO thin films on PET substrates showed high transparency (> 85 % at 550 nm) and low sheet resistance (450 ${\Omega}$/sq.). These values were similar to those of commercial ITO films used for resistive type touch panel.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1457-1458
• /
• 2009

The fundamental parameters controlling ink-jet printing liquids are the viscosity and surface energy. The wetting contact angle determines the spread of a liquid drop on the surface and depends on the relative surface energy. The characteristics of silver ink-jet printing were studied with control of surface energy and head temperature. Polyethylene terephthalate(PET) film and Si-wafer(ptype) were used as substrates and atmospheric plasma was treated to control the surface energy. With silver ink, the hydrophilic surface treatment could reduce the radius of droplets due to the hydrophobic nature of silver ink.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.593-596
• /
• 2007

A possibility of manufacturing bendable ac-PDP using aluminum electrode with anodic aluminum oxide dielectric material system on PET film substrate was explored. For this structure, PET film with fence-structured aluminum electrodes was used for front plate and PET film with barrier ribs of UV curable resin for the rear plate. The results demonstrate that it is feasible to manufacture the bendable ac-PDPs using those material system and are expected to expand the applications of plasma display panels.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1988.10a
• /
• pp.33-35
• /
• 1988

From the study of mechanism of electrical conduction of film which is made from Polyethylene Terephthalate at very high temperature which is larger than low electric field and glass transition point, we find that there is a extraordinary non ohmic region (I∝V$^n$, 0

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.163-166
• /
• 1998

In this paper, breakdown strength and dielectric characteristics were experimented in the structures of insulation/insulation/insulation and insulation/semiconductor/insulation by using of insulation material of polyethylene terephthalate film. The breakdown strength and the permitivity of each specimen were measured as a function of temperature and frequency respectively. The breakdown strength of PET/PET/PET did not changed greatly but that of PET/SEMl/PEr increased as a function of temperature. As the frequency inclosed, the permitivity of PET/PET/PET and PET/SEMI/PET decreased. The tan $\delta$ of PET/PET/PET showed lower than that of PET/SEMl/PET in low frequency but higher in high frequency .

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.3
• /
• pp.36-41
• /
• 2019

Hybrid-type transparent electrodes were fabricated by depositing carbon nanotubes (CNTs) via spray coating on polyethylene terephthalate (PET) substrates and then coating the CNTs with [poly(3,4-ethylenedioxythiophene)] (PEDOT) films via electro-polymerization. For all of the fabricated electrodes, their surface morphologies, electric sheet resistances, visible transmittances, and color properties (e.g., yellowness) were characterized as functions of the applied voltages and process times used in electro-polymerization. The sheet resistance of the CNTs was significantly reduced by the coating of PEDOT, while their visible transmittances slightly decreased. The yellowness values of the PEDOT-coated CNTs were observed to have substantially decreased via electro-polymerization. The experimental results confirmed that the fabricated hybrid electrodes had desirable properties for the application of transparent electrode in terms of the electrical resistance, optical transmittance, and chromaticity.

• Applied Science and Convergence Technology
• /
• v.23 no.2
• /
• pp.90-96
• /
• 2014

Flexible $ZrO_2$ films as dielectric materials for high-energy-density capacitors were deposited on polyethylene terephthalate (PET) substrates by RF magnetron sputtering. The growth behavior, microstructure and electrical properties of the flexible $ZrO_2$ films were dependent on the sputtering pressure and gas ratio. Although $ZrO_2$ films were deposited at room temperature, all films showed a tetragonal crystalline structure regardless of the sputtering variables. The surface of the film became a surface with large white particles upon an increase in the $O_2/Ar$ gas ratio. The RMS roughness and crystallite size of the $ZrO_2$ films increased with an increase in the sputtering pressure. The electrical properties of the $ZrO_2$ films were affected by the microstructure and roughness. The $ZrO_2$ films exhibited a dielectric constant of 21~38 at 1 kHz and a leakage current density of $10^{-6}{\sim}10^{-5}A/cm^2$ at 300 kV/cm.

• Journal of Information Display
• /
• v.12 no.2
• /
• pp.109-113
• /
• 2011

This paper summarizes the recent fabrication and characterizations of flexible high-speed radio frequency (RF) transistors, PIN-diode single-pole single-throw switches, as well as flexible inductors and capacitors, based on single-crystalline Si nanomembranes transferred on polyethylene terephthalate substrates. Flexible thin-film transistors (TFTs) on plastic substrates have reached RF operation speed with a record cut-off/maximum oscillation frequency ($f_T/f_{max}$) values of 3.8/12 GHz. PIN diode switches exhibit excellent ON/OFF behaviors at high RF frequencies. Flexible inductors and capacitors compatible with high-speed TFT fabrication show resonance frequencies ($f_{res}$) up to 9.1 and 13.5 GHz, respectively. Robust mechanical characteristics were also demonstrated with these high-frequency passives components.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.36 no.11
• /
• pp.783-789
• /
• 1987

It is anticipated that the accuracy of the numerical value obtained by curve fitting is mainly governed by how to evaluate the term of exponential integral involved in the theory of TSC, so that evaluation process of the instegral term concerned is replaced by Romberg numerical integral method instead of the conventional approximation method of asymtotic expansion or Simmons-Tayler with expectation to get the improved accuracy. In order to examine the effectiveness of the proposed method, the new algorithm is tried to adapt to the peak of TSC observed about 356 K im the specimen of polyethylene terephthalate in which carrier is injected by means of corona dischargel. As theresults, it is confirmed that the proposed method being cooperated with Romberg numerical intergral intergral is superior to the existing conventional curve fitting method.