• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.69 no.2
• /
• pp.123-132
• /
• 2024

In this study, two types of biodegradable film prototypes were produced using plastic resin containing rice powder. The application of these biodegradable films in sweetpotato (Ipomoea batatas L. Lam) fields and their impacts of plant growth, yield, and the soil environment were assessed, in comparison with Polyethylene (PE) film. The light transmittance of the biodegradable film containing 30% of 350 mesh rice powder (BF30-350RP) was 0.8%, which was lower than the 2.0% light transmittance of the biodegradable film containing 40% of 500 mesh rice powder (BF40-500RP) and 2.7% light transmittance of PE film. Surface temperature measurements on clear day indicated that the PE film exhibited the lowest temperature, with the minimal difference observed between BF40-500RP and BF30-350RP. Assessment of the damage ratio resulting from agricultural work revealed a ranking of 0.4% for the PE film, 3.3% for BF500-400RP, and 5.3% for BF350-30RP. Visible decomposition of BF40-500RP and BF30-350RP commenced after 40 and 30 days of outdoor exposure, reaching 62.3% and 70.4% decomposition at 90 days post-exposure, respectively. The decomposition of biodegradable films applied to sweetpotato fields progressed more slowly in BF40-500RP than in BF30-350RP. The BF40-500RP film on the surface of the ridges was decomposed by 5%, 30%, 55%, and 90% after 30, 60, 90, and 120 days after planting sweetpotato cuttings, respectively. Both types of biodegradable films at the ridge and furrow borders were completely decomposed after 75 days of sweetpotato planting. In a field where the surface was sealed by mulching without growing sweetpotatoes, the soil moisture and its deviation were lower in the order of PE film, BF40-500RP, and BF30-350RP, but the differences were not significant. The soil temperature was higher for PE film mulching than for the biodegradable films containing rice powder, but the differences were small. Two months after sweetpotato planting, the daily average soil moisture decreased by 2.5%point for BF30-350RP mulching, 1.5%point for BF40-500RP mulching, and 1.1%point for PE film mulching over seven days. Soil temperature was similar for both biodegradable film mulches, but increased steadily for the PE film mulch, reaching a daily average of 0.1℃ higher than for the biodegradable films. Sweetpotato vine growth and tuber yield were similar for all the mulching films tested.

• Korean Journal of Soil Science and Fertilizer
• /
• v.27 no.2
• /
• pp.125-135
• /
• 1994

Field experiment was carried out in order to clarify effects of plastic film mulching on temperature and moisture of rhizosphere soil and their subsequent effects on seedling emergence, earlier growth, vegetative growth and grain yield of sesame. The textural class of the experimental field soil was the sandy loam(Bonyang series) and the variety of sesame planted was "Ansan-ggae". The experiment was conducted by combining four sowing dates of April 25, May 10, May 25, June 10 and two mulching treatments(mulching, non-mulching) over two year of 1991 and 1992. The results were summarized as follows : 1. The daily mean soil temperature of 5cm deep soil was increased by 1.4 to $2.8^{\circ}C$ by plastic film mulching. The average soil water content was increased by 0.5 to 3.0%(V/V) in the drier season, while decreased by 1.0 to 2.0%(V/V) in the rainy season by mulching. 2. The establishment rate of sesame seedling was very sensitive to soil temperature. For normal seedling emergence, from the seeding date to the 7th date after sowing, the daily mean soil temperature higher than $21.0^{\circ}C$ was required at the experimental field conditions. 3. The average soil water content in the range of 14.0 to 21.0%(V/V) at 5cm deep soil seemed not to be limiting for the germination and emergence of sesame. The effect of soil water content on seedling establishment was very small in this range, but the optimum level of soil water content ranged from 14.0 to 15.0%(V/V) in the experimented sandy loam. 4. The wetter the soil profile was, the larger the gap of soil temperature between the mulched and non-mulched condition was. The effect of mulching on the establishment rate of sesame seedlings was much greater in the lower air temperature conditions. However, when the sowing of sesame came earlier than at the date with the daily mean air temperature below $19.0^{\circ}C$, the effects of earlier sowing and mulching were offsetted by the retarded seedling growth due to the low air temperature, and thus earlier sowing with mulching did not enhance the grain yield of sesame.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.28 no.2
• /
• pp.105-113
• /
• 2022

Mulching film was produced by LDPE and LLDPE adding biomass byproducts and MA(maleic anhydride), talc/clay/CaO/CaCO₃. And also surveyed to tensile strength, elongation, TGA and DSC according to the UV irradiation time. The tensile strength and elongation showed 20 N/cm² and 5% after UV irradiation 100 hours, and those was nearly 0 N/cm² and 0% after 200 hours, respectively. TGA of film was showed to peak of polymer itself, and DSC was slightly higher than that of initial value. At the pilot scale test, we were able to see the differentiate of degradation between control and developed film after 12 weeks, and also torn off at several part of mulching film. The degradation of mulching film after growing corn showed similar to a pilot scale test. Above the results, the developed mulching film adding biomass will be to used for agricultural farming.

• Journal of Bio-Environment Control
• /
• v.24 no.4
• /
• pp.326-332
• /
• 2015

The effect of biodegradable mulching film on the growth and development of garlic were investigated in order to develop eco-friendly weed control techniques. The treatments included biodegradable film (Bio-De) and black (Black-PE), green (Green-PE), transparent (Trans-PE) polyethylene mulching films. Non-mulched, bare soil (Non-mulching) was used as a control. Light transmittance value among tested mulching films was the highest in Trans-PE (86.1%) followed by Bio-DE and Green-PE, and the lowest value was observed for the Black-PE (1.1%). All mulching films without exclusion elevated soil temperature, especially Trans-PE and Bio-DE compared to bare soil. Plant height and mean bulb weight were increased due to mulching films with the highest values observed for Trans-PE and Bio-DE treatments. After seven months of field application there were no significant degradation signs on PE plastic films, whereas it was easy to see horizontal cracks on the Bio-DE film surface after five month of usage.

• Korean Journal of Medicinal Crop Science
• /
• v.5 no.2
• /
• pp.91-94
• /
• 1997

This experiment was carried out to investigate the effects of black P.E. film mulching by different sowing dates on the growth and yield of Achyranthes japonia NAKAI. Emergence rate and the growth increment were increased in black polyethylene (P.E.) film mulching of sowing date at April 1. Dried root yield was highest by 3,190kg/ha in black P.E. film mulching and earlist sowing at April 1 with 20% increase compared to that of non mulching at April 1 planting.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.13 no.1
• /
• pp.1-9
• /
• 2011

This study was conducted to investigate the influence of different polyethylene film (P.E. film) for mulching on the changes in soil temperature and the production of good feathered apple nursery trees. M.9 rootstocks with stem diameter of 9.1~11.0 mm were planted in plots covered with different P.E. film (i.e., transparent P.E. film, black P.E. film, and bare soil as control). Three weeks after planting, the rootstocks were veneer grafted with 'Sinano Sweet' apple cultivar. In the middle of June, BA was sprayed to nursery for inducing feathering during the growing season. The soil temperature of the control was higher than air temperature by about $0.7^{\circ}C$ from mid April to early October, and that of P.E. film mulching was about $1{\sim}5^{\circ}C$ higher than that of the control. The soil temperature under transparent P.E. film was about $2{\sim}3^{\circ}C$ higher than that under black P.E. film. The diurnal range of soil temperature under the black P. E. film was lowest among all treatments. The P.E. film mulching induced better tree growth and feathering than bare soil. Percentage of good feathering apple nursery of black P.E. film was highest among all treatments because the soil temperature unuder black P.E. film in the early growing season was higher than that of the control and the number of days when the maximum soil temperature was over $35^{\circ}C$ in the summer was lower than that under the transparent P.E. film.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.57 no.2
• /
• pp.99-105
• /
• 2012

The main challenges for the development of agricultural bio-degradable mulching film concern the degradation during the lifetime of cultivated crops. A set of rice by-product (rice-hull and rice-bran) based bio-degradable mulching films was developed and tested, following the measurement of standard bio-degradability rate and adaptability in a large scale field experiment. The standard bio-degradability of bio-film passed the KS (Korea standard) regulation. The result of mechanical analysis of bio-degradable mulching film presented a higher mechanical strength and elongation rate compared with polyethylene film. In addition, bio-film could be degraded into fragments within 4 months under the field condition of several upland crops. Bio-degradable mulching film indicated great potential as a new source of agricultural bio-degradable material.

• Journal of Bio-Environment Control
• /
• v.15 no.2
• /
• pp.184-189
• /
• 2006

Effects of interspace mulching between polyethylene film house on growth and quality of oriental melon were followed. Soil moisture in control was 26.0%. Those of black nonwoven fabrics sheet and black film were less 1.2% and 2.9% than control, respectively. Soil temperature in control plot was $2.4^{\circ}$ Those of black nonwoven fabrics sheet and black film were higher $0.8^{\circ}$ and $1.8^{\circ}$ than control, respectively. Black film was better than control in stem length, leaf number and area, chlorophyll content, xylem exudate, first flowering and fruit riping periods. Black film was better in fruit weight and soluble solid, and lesser in fermented and malformed fruit ratios, and increased 28% in marketable fruit ratio to control, 1,864kg. This results were mainly from vinyl coverage between polyethylene film house to intercept rainfall and to increase soil temperature, which fasted growth of roots after transplanting in winter season.

• Korean Journal of Medicinal Crop Science
• /
• v.2 no.2
• /
• pp.121-126
• /
• 1994

This experiment was carried out in the field to investigate the effects of sowing time, mulching materials and planting density on the growth and root yield of Peucedanum japonicum. The optfimum planting time for yield increase at Kyungbuk area whether the plant was grown under non-mulching or black P. E. mulching condition. Black polyethylene (P. E) film mulching was effective to promote emergence and growth, and dry root yield in the P. E. mulching was 10% higher than that in the non-mulching condition. The yield in the $20{\times}15cm$ planting density was 50% higher than that in the conventional $30{\times}20cm$.

• Food Science and Biotechnology
• /
• v.15 no.1
• /
• pp.5-12
• /
• 2006

Degradation performance of environmentally friendly plastics that can be disintegrated by combination of sunlight, microbes in soil, and heat produced in landfills was evaluated for use in industries. Two multi-degradable master batches (MCC-101 and MCC-102 were manufactured, separately mixed with polyethylene using film molding machine to produce 0.025 mm thick films, and exposed to sunlight, microbes, and heat. Low- and high-density polyethylene (LDPE and HDPE) films containing MCC-101 and MCC-102 became unfunctional by increasing severe cleavage at the surface and showed high reduction in elongation after 40 days of exposure to ultraviolet light. LDPE and HDPE films showed significant physical degradation after 100 and 120 days, respectively, of incubation at $68{\pm}2^{\circ}C$. SEM images of films cultured in mixed mold spore suspension at $30^{\circ}C$ and 85% humidity for 30 days revealed accelerated biodegradation on film surfaces by the action of microbes. LDPE films containing MCC-l01 showed absorption of carbonyls, photo-sensitive sites, at $1710\;cm${-1}$ when exposed to light for 40 days, whereas those not exposed to ultraviolet light showed no absorption at the same frequency. MCC-101-based LDPE films showed much lower $M_w$ distribution after exposure to UV than its counterpart, due to agents accelerating photo-degradation contained in MCC-101.