• 한국염색가공학회지
• /
• 제15권4호
• /
• pp.24-31
• /
• 2003

In this research, we applied FT-IR spectroscopy to study the hydrolysis of the ester-crosslinking formed by various polycarboxylic acids on the cotton fabric. We observed the following; (1) the ester-crosslinking is less durable to hydrolysis than ether-crosslinking under all conditions; (2) the ester-crosslinking formed by polycarboxylic acids having more than three carboxyl groups, such as butanetetracarboxylic acid (BTCA), are substantially more durable to hydrolysis than the acids having two or three carboxyl groups, such as maleic and citric acid; (3) alkaline conditions drastically accelerate the hydrolysis of both urea- and ester-crosslinking; and (4) the ester-crosslinking formed by poly(maleic acid) is more resistant to hydrolysis at alkaline conditions than BTCA. (5) polycarboxylic acid molecules were removed from the fabric at same rate as the hydrolysis of the ester linkage. FT-IR spectroscopy has proved to be a useful analytical technique for evaluating the hydrolysis of the crosslinked cotton fabric.

• 한국가정과학회지
• /
• 제9권1호
• /
• pp.43-50
• /
• 2006

The main colorant of Chelidonium majus extracts is a berberine which shows relatively good dyeability onto silk fabrics in the appropriate dyeing conditions without mordant, But cotton fabrics are difficult to dye with berberine because of the low substantivity the cationic to cellulosic fibers. we treated cotton fabrics using three types of polycarboxylic acid, DL-malic acid, citric acid, 1,2,3,4-butanetetracarboxylic acid(BTCA) to increase dyeability of Chelidonium majus extracts onto cotton fabrics. As a result the cotton fabrics treated with polycarboxylic acid could be dyed with Chelidonium majus extracts and also showed yellow vividly. The dye uptake were increased with increasing the number of carboxy groups. And so dye uptake resulted the largest in the BTCA solutions which have four carboxylic groups in the molecular unit. The optimal dyeing temperature a of Chelidonium majus extracts onto polycarboxylic acid treated cotton fabrics were $60^{\circ}C$. The dye equilibrium was reached 20 minutes after dyeing. Neutral pH of dye solutions showed in higher K/S value than acidic or alkaline conditions. But the colorfastness to washing and light according to polycarboxylic acid treat was not enhance.

• 펄프종이기술
• /
• 제30권2호
• /
• pp.55-61
• /
• 1998

This treatment was applied to bleached softwood kraft pulp handsheets in an effort to improve physical strength of paper. Paper strength was improved by esterification of cellulose and polycarboxylic acid. Because hydrogen bond of carboxyl group is stronger than that of hydroxyl group, polycarboxylic acid forms stronger hydrogen bond than cellulose does. 1,2,3,4,-cyclopentanetetracarboxylic acid (CPTA) and sodium dihydrogen phosphate ($NaH_2O_4$) were used as polycarboxylic acid and catalyst, respectively This reaction was confirmed by the weight gain of the handsheets, by FTIR spectrum and by changes in mechanical properties of sheets. Wet tensile strength was improved when handsheets were treated with polycarboxylic acid. However, tear strength and burst strength decreased.

• 한국염색가공학회지
• /
• 제17권3호
• /
• pp.16-25
• /
• 2005

In this research, we investigated hydrolysis of the ester crosslinking on cotton fabric treated with polymer of maleic acid(PMA), citric acid(CA) and combination of polymer of maleic acid and citric acid using Fourier transform infrared spectroscophy. The rate of hydrolysis of the ester crosslinkage increased with pH regardless of the type of polycarboxylic acid used and even after hydrolysis for 256 hour in pH 13_4 solution, the treated fabric retained $10-20\%$ ester crosslinkage. The durability to alkaline hydrolysis of the ester crosslinkage formed by CA was lower than that of by PMA and combination of poly(maleic acid) and citric acid indicating that the ester formed by CA on the cotton fabric is more susceptible to hydrolysis than that formed by PMA and combination of PMA and CA. The total amount of ester and polycarboxylic acid molecules removed from fabric increased with increasing hydrolysis time but the rate of hydrolysis of ester linkage were higher than that of removal of polycarboxylic acid molecule from the fabric. The characteristic of hydrolysis of fabric treated with combination of PMA and CA was related with the mixing ratio of PMA and CA in treating fabric.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.743-748
• /
• 2002

Properties of concrete have been tested with Polycarboxylic superplasticizers based on Malein Anhydride Acid Polymer synthesized in a laboratory, to decide the proper formulation for concrete. Ready-mixed concrete has been placed at field with the chosen formulated Polycarboxylic superplasticizer. The superplasticizer showed quite a performance in workability retention and strength development of concrete at laboratory test and field application.

• 한국염색가공학회지
• /
• 제21권4호
• /
• pp.39-45
• /
• 2009

PVA films were crosslinked with dimethylol dihydroxy ethylene urea (DMDHEU) and three polycarboxylic acids of butanetetracarboxylic acid (BTCA), citric acid and malic acid Different factors influencing the crosslinking treatment with BTCA were investigated including BTCA and sodium hypophosphite (SHP) concentration, curing temperature and time. The cured films was extracted with boiling water and gel fraction was calculated based on weight change of the PVA films. The gel fraction of PVA films increased with increasing curing temperature and time. And the resistance to water and thermal stability of the crosslinked PVA films improved with the BTCA crosslinking treatment. While crosslinking with citric acid gave the highest gel fraction among the crosslinkers, crosslinking with malic acid showed the highest absorbancy in 0.9% saline solution, which was attributed to lower crosslink density and high number-average molecular weight between crosslinks. The superabsorbent PVA films could be prepared by adjusting the crosslinking condition of PVA with polycarboxilic acids.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.331-336
• /
• 2006

The aim of this work was to inhibit the heat-and moisture-induced yellowing of ECF/TCF bleached hard wood kraft pulp (HBKP) retaining hexenuronic acid (HexA). We have already reported that one of the derivatives of HexA, 5-formyl-2-furancarboxylic acid (FFA), causes yellowing of HBKP in acidic paper, and that FFA might polymerize or react with pulp components to form new chromophoric groups (1). In this study, it was shown that the carboxylic base of FFA interacts with that of glucuronic acid or galacturonic acid, resulting in strong yellowing. Therefore, it seems that preventing the reaction of carboxylic bases could be effective in suppressing this yellowing. We have discovered that polycarboxylic acids (for example, citric acid, tartaric acid, etc.) are useful as a yellowing inhibitor.

• 한국세라믹학회지
• /
• 제39권2호
• /
• pp.164-170
• /
• 2002

Acrylate 수계 결합제를 사용한 알루미나 테이프 캐스팅용 슬러리의 완전분산을 위한 최적의 분산제와 분산제량을 결정하기 위해 침강실험, 분말 함유량 실험, 점도 및 zeta 전위 측정을 행하였다. 알루미나 슬러리의 완전분산은 분산제를 polycarboxylic acid로 했을 때 얻어졌으며, 최적의 첨가량은 알루미나 100에 대하여 0.23∼0.24g 이었다. 분말에 대한 분산제량이 증가할수록 분산은 잘 이루어졌으나, 일정량 이상이 첨가되면 분산제가 용매 안에 과잉으로 존재하여 분산을 저해하는 요인으로 작용하였다. 테이프 캐스팅용 슬러리는 100g의 알루미나 분말에 0.2g의 polycarboxylic acid를 첨가하였을 때 분산 및 테이프 특성이 가장 우수하였고, 이 때 혼합한 결합제는 acrylate였고, 가소제는 Benzoflex를 사용하였다. 이 때 슬러리 최적 점도는 약 570 cps였고, 테이프 내 알루미나 량은 57 vol%이었다.

• 공업화학
• /
• 제21권4호
• /
• pp.463-468
• /
• 2010

콘크리트 유동화제로 사용되는 polycarboxylate 계 콘크리트 유동화제를 합성하였다. 합성에 있어서 친수기인 polyethylene oxide 부가몰 및 분자량에 따른 합성된 유동화제의 물성 및 이의 콘크리트 몰타르에 미치는 영향을 조사하였다. 합성원료로서 methoxy-polyethyleneglycol 및 methacrylic acid의 종류, methacrylic acid 부가량, 개시제 종류 및 양에 따른 graft 공중합 조건에 따라 얻어진 PC의 물성 및 이가 모르타르에 미치는 영향을 조사하였다. 물성으로는 PC 수용액의 계면물성, 시멘트 입자의 젖음성, 몰타르의 유동성 및 최종 콘크리트의 강도 등을 측정하였다. 합성된 PC는 수용액에 대한 표면장력 값이 작을수록 시멘트 입자에 대한 젖음성이 우수할수록 우수한 모르타르 유동성을 보였으며 콘크리트의 강도가 높았다. 본 연구 조건에서는 MPEG 대비 MA 함량이 1.3 정도일 경우 그리고 개시제가 KSP일 경우에 합성된 PC가 가장 적합하였다.

• 콘크리트학회지
• /
• 제7권5호
• /
• pp.189-199
• /
• 1995

나프탈렌술폰산 축합물( NSF) 은 시멘트 콘크리트용 고유동화제로 널리 사용되어 왔으나 경시에 따른 슬럼프 손실이 크다는 단점을 가지고 있다. NSF의 단독사용에 따른 이러한 단점을 보완하고자 유동성 유지의 서방성 기능을 지닌 무수말레인산-아크릴산의 폴리카르본산계 공중합체( MA)를 합성하였다. 합성한 MA를 NSF와 일정비율로 혼합하고 시멘트 페이스트에 적용하여 유동성 및 경시에 다른 유동성 유지성능과 유변학적 거동, 재령별 몰탈의 압축강도를 측정하여 물성에 미치는 영향을 살펴보았다. NSF에 MA를 각각 10,20 wt%씩 첨가한 NM-2가 우수한 유동성 및 유지성능을 보였으며, 유변학적 특성에서도 경과시간에 따른 전단응력 및 점도의 증가현상이 NSF단독 첨가에 비하여 지연됨으로써 시멘트 페이스트의 급격한 슬럼프 손실이 억제됨을 보여주었다. 또한 이러한 특성들은 혼화제의 투입량 및 물-시멘트비( W/C) 의 증감에 의해서도 영향을 받고 있다.