• 폴리머
• /
• 제35권6호
• /
• pp.543-547
• /
• 2011

전도성고분자 polyaniline(PANI)의 구조 변화없이 전기전도도를 띠면서 가공성과 기계적 특성을 증가시키는 연구를 수행하였다. 기능성 산으로 도핑된 PANI-DBSA는 유화 중합하였고, dodecylbenzenesulfonic acid(DBSA)는 계면활성제와 도펀트 역할을 동시에 하도록 하였다. 이어서 PANI-DBSA를 high impact polystyrene(HIPS)와 용액 캐스팅하여 블렌드 필름을 제조하였다. UV-vis, FTIR/ATR 분광법으로 블렌드 구조와 전기적 특성을 확인하였다. PANI-DBSA/HIPS 블렌드에 관한 연구는 분산성과 모폴로지 변화에 따른 기계적인 특성과 전기적 특성 확인에 중점을 두고 진행하였다. 전기전도도는 PANI-DBSA 함량 증가에 따라 상승하였고, 9 wt% 정도로 낮은 함량에서도 $3.5{\times}10^{-4}$ S/cm로 급격하게 상승하였다. 전도성고분자 블렌드에서 연속적인 고분자 망상구조 형성이 percolation과 전기전도도에 밀접한 연관성이 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제32권3호
• /
• pp.927-933
• /
• 2011

Conducting polyaniline-poly($\varepsilon$-caprolactone) polymer composites were synthesized via in situ deposition techniques. By dissolving different weight percentages of poly($\varepsilon$-caprolactone) (PCL) (10%, 20%, 30%, 40%, and 50%), the oxidative polymerization of aniline was achieved using ammonium persulfate as an oxidant. FTIR, UV-vis spectra, and X-ray diffraction studies support a strong interaction between polyaniline (PANI) and PCL. Structural morphology of the PANI-PCL polymer composites was studied using scanned electron microscopy (SEM) and transmittance electron microscopy (TEM), and thermal stability was analyzed by thermogravimetric analysis (TGA) technique. The temperature-dependent DC conductivity of PANI-PCL polymer composite films was studied in the range of 305-475 K, which revealed a semiconducting behavior in the transport properties of the polymer films. Conductivity increased with the increase of PCL in below critical level, however conductivity of the polymer film was decreased with increase of PCL concentration higher than the critical value.

• Korean Chemical Engineering Research
• /
• 제60권1호
• /
• pp.1-6
• /
• 2022

최근 웨어러블 디바이스에 대한 수요가 증가하면서 유연 전극 소재 개발에 대한 다양한 연구들이 진행되고 있다. 특히, 헬스케어용 웨어러블 센서들은 체온이나 심장 박동, 혈당, 혈중 산소 농도 등 신체 정보들의 실시간·지속적인 모니터링과 정확한 진단, 검출이 가능해야 하기 때문에 고성능 유연 전극 소재의 개발이 무엇보다 중요하다. 본 연구에서는 탄소나노튜브 섬유(carbon nanotube fiber; CNT fiber) 기반의 유연 전극 소재의 성능을 개선시키기 위해 CNT fiber 위에 전기화학적 중합(electrochemical polymerization) 공정을 통해 polyaniline (PANI) layer를 합성하고, 이에 대한 전기화학적 특성 분석과 비효소적 글루코스(glucose) 검출 특성을 확인하였다. 제작된 PANI/CNT fiber 전극의 표면 분석은 주사전자 현미경(SEM)을 이용하여 진행되었으며, 전극의 전기화학적 특성 및 글루코스에 대한 센싱 성능은 시간대전류법(CA)과 순환전압 전류법(CV), 전기화학 임피던스법(EIS)을 이용하여 분석되었다. PANI/CNT fiber 전극의 전기화학적 특성은 bare CNT fiber 전극에 비해 작은 electron transfer resistance와 낮은 peak separation potential, 증가된 전극 면적을 나타내며, 이런 향상된 특성들 덕분에 글루코스 검출에 대한 센싱 성능이 개선되었다. 따라서, 본 연구를 기반으로 다양한 나노구조체를 도입하고 접목을 통해 고성능 CNT fiber 기반의 유연 전극 소재 개발이 가능할 것으로 기대된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.802-805
• /
• 2001

Conductive polymer is insulator or semiconductor in initial state. Polyaniline(PANI) is a $\pi$-conjugated polymer that shows electric property changes, when it is contact with oxidant/reductor chemicals. Synthesis of polyaniline is used vacuum evaporation method, using by (NH$_4$)$_2$O$_{8}$과 NMP, NH$_2$NH$_2$, HCl, MH$_4$OH, etc. Doped PANI is used such a resistor, addition to graphite is increased conductivity. Applying contact voltage, samples show constant current and contact temperature.e.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2009년도 학술발표대회
• /
• pp.158-159
• /
• 2009

Conducting polyaniline (PAni)-titanium dioxide ($TiO_2$) nanocomposites have been synthesized by the inverted emulsion polymerization method. The resultant PAni-$TiO_2$ nanocomposites are characterized with their structural, morphological, conducting and optical properties.

• Bulletin of the Korean Chemical Society
• /
• 제11권2호
• /
• pp.105-108
• /
• 1990

A spectroelectrochemical study on the redox chemistry of polyaniline (PANI) was carried out by using indium-tin oxide (ITO) transparent electrode in aqueous acidic solutions. Three different PANI-derived species were observed depending on the potential. The most highly oxidized species having alternating benzenoid-quinoid structures degraded through hydrolysis reaction. The degradation products were confirmed to be p-benzoquinone (BQ) and p-diaminobenzene (PDAB) by spectrophotometry anld potentiostatic experiments. Finally, a degradation mechanism is deduced from the observed behaviour.

• Bulletin of the Korean Chemical Society
• /
• 제33권7호
• /
• pp.2345-2351
• /
• 2012

Conductive honeycomb-patterned polystyrene (PS) thin films were prepared by the formation of a polyaniline (PANI) thin layer on the surface of the patterned PS thin films using simple one-step chemical oxidative polymerization of aniline. The in situ chemical oxidation polymerization of aniline hydrochloride solution on the patterned structure of the PS films was conducted in the presence of multiwalled carbon nanotubes (MWCNT) to prepare the PANI-MWCNT/PS composite film. The concentration (wt %) of MWCNT was varied in the range of 1%-3% by weight. The dependence of surface morphology of the PANI/PS and PANI-MWCNT/PS composite film to the polymerization time was observed by scanning electron microscopy. The room temperature DC conductivity was obtained by the four-probe technique. The conductivity of the PANI-MWCNT/PS composite film was affected both by the MWCNT concentration and polymerization time. In addition, DC electrical field was loaded during the oxidative polymerization to affect the distribution of the MWCNT included in the composite film, varying the loading voltage in the range of 0.1-3.0 V. The conductivity of the PANI-MWCNT/PS composite film was increased as loading voltage rose. However, this increase stops at a voltage higher than the critical value.

• Journal of Microbiology and Biotechnology
• /
• 제25권8호
• /
• pp.1291-1298
• /
• 2015

Five different polymer nanofibers, namely, polyaniline nanofiber (PANI), magnetically separable polyaniline nanofiber (PAMP), magnetically separable DEAE cellulose fiber (DEAE), magnetically separable CM cellulose fiber (CM), and polystyrene nanofiber (PSNF), have been used for the immobilization of lactase (E.C. 3.2.1.23). Except for CM and PSNF, three polymers showed great properties. The catalytic activities (k_cat) of the free, PANI, PAMP, and magnetic DEAE-cellulose were determined to be 4.0, 2.05, 0.59, and 0.042 mM/min·mg protein, respectively. The lactase immobilized on DEAE, PANI, and PAMP showed improved stability and recyclability. PANI- and PAMP-lactase showed only a 0-3% decrease in activity after 3 months of vigorous shaking conditions (200 rpm) and at room temperature (25℃). PANI-, PAMP-, and DEAE-lactase showed a high percentage of conversion (100%, 47%, and 12%) after a 1 h lactose hydrolysis reaction. The residual activities of PANI-, PAMP-, and DEAE-lactase after 10 times of recycling were 98%, 96%, and 97%, respectively.

• 공업화학
• /
• 제17권1호
• /
• pp.16-21
• /
• 2006

본 연구에서는 폴리아닐린(PANI)을 제조하여 큰 분자량의 유기산인 10-camphor sulfonic acid (CSA) 또는 dodecylbenzene sulfonic acid (DBSA)로 도핑시키고, polyethylene oxide (PEO)와 함께 블렌딩하여 전기방사 용액을 제조하였다. 제조된 용액을 전기방사하여 섬유형태로 만든 후, TGA와 전기화학 장치(cyclic voltammetry; CV)로 열적, 전기적 성질을 CSA 또는 DBSA로 도핑된 PANI의 함량에 따라 비교, 분석하였다. 본 실험 결과, PANI-CSA와 PANI-DBSA의 함량이 증가함에 따라 열분해 개시온도는 감소하지만 열안정성 지수와 적분 열분해 진행온도가 증가하는 것으로 보아 열안정성은 증가하는 것으로 판단된다. 또한, 전기전도도는 PANI-CSA와 PANI-DBSA의 함량이 증가함에 따라 증가하였으나 30% 이상이 되면 전도도가 일정해지는 것으로 나타났다. 순환전류젼압 곡선 결과, PANI/CSA는 PANI-DBSA 보다 피크가 좀 더 명확해지며, 전류밀도가 크게 나타났다. 이는 PANI/CSA가 약간 더 높은 전기전도도와 전하가 이동하기 쉬운 모폴로지를 가지고 있기 때문인 것으로 판단된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.196.2-196.2
• /
• 2014

Nanostructuring the electrode surface is an emerging technology to improve the performance of supercapacitors since it can facilitate charge transfer, ion diffusion and electron propagation during electrochemical process. Fabrication of the electrode consisting of two or more materials together has also been focused on since it can provide synergetic effect such as broader working potential range and enhanced capacitance. In this work, we have used polyaniline (PANi) and manganese oxide (MnO2) as electrode materials. PANi is one of the promising electrode materials due to its high electrochemical activity, high doping level and stability. MnO2 is also widely studied material for supercapacitors since it is relatively cheap and environmentally friendly. Firstly, we synthesized polystyrene nanospheres on MnO2 nanoparticles. MnO2-incorporated PANi hollow nanospheres were then fabricated by polymerizing aniline monomers on these PS nanospheres and dissolving the inner PS spheres. The surface morphology, electronic absorption and electrical conductivity of the electrode were analyzed using field-emission scanning electron microscope (FE-SEM), UV-visible spectrometer, and sheet resistivity meter, respectively. The electrochemical properties such as capacitance of the supercapacitors were also estimated using cyclic voltammetry.