• Journal of Industrial Technology
• /
• v.21 no.A
• /
• pp.337-341
• /
• 2001

This study was carried out to screen the effective polymeric additives preventing wall growth during mycelial submerged cultivation of Ganoderma. lucidum. Effects of additives on mycelial growth and exo-polysaccharide (EPS) production in flask culture and jar fermenter system under 3 different pH processes were investigated, and changes of mycelial morphology were also examined. From flask culture of G. lucidum with additives of different concentrations, 0.1%(w/v) polyacrylic acid was effective for EPS production. As the polyacrylic acid of 0.1%(w/v) was added in medium, wall growth of G. lucidum mycelium grown in jar fermenter system could be protected. The addition of 0.1%(w/v) polyacrylic acid to medium was also improved the mycelial growth and EPS production in the later of submerged culture G. lucidum and no changes of mycelial morphology were observed.

• The korean journal of orthodontics
• /
• v.32 no.1 s.90
• /
• pp.51-57
• /
• 2002

The purpose of this study was to compare in vitro shear bonding strength with three different enamel surface preparations (1) 30% sulfated polyacrylic acid with 0.3M lithium sulfate (2) 40% sulfated polyacrylic acid with 0.3M lithium sulfate (3) 37% phosphoric acid. 105 extracted human premolar teeth were divided into each three groups of 35. Metal brackets were bonded to teeth in the three groups. The same self curing resin was used for all groups. A shearing force was applied to the teeth. After debonding, bases of bracket and enamel surfaces were examined under steroscopic microscope to determine the failure modes. Statistical analysis of the data was carried out with one way ANOVA and Student t- test. The results were as follows. 1. Shear bond strength values for the 30% polyacrylic acid and 40% polyacrylic acid group were approximately two thirds of the phosphoric acid group. It maintains clinically acceptable but not enough bond strength. 2. There was no statistically significant difference in shear bond strengths between 30% and 40% polyacrylic acid group. 3. The failure modes of brackets had some differences. In polyacrylic acid groups, the percentage of adhesive/enamel failure was higher than that of adhesive/ bracket interface failure. On the contrary in phosphoric acid groups, the results were reversed. Further study of bond strength could be required. If polyacrylic acid enamel conditioning is used clinically.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.223-224
• /
• 2017

In this study, various materials such as epoxy material, urethane material, cement material, and acrylic material are used to solve the water leakage occurring in underground structures. However, in the reality that the durability is insufficient and the effect is insufficient, it is aimed to improve the repairing effect by using cement and acrylics in combination. As a first study, we tried to verify the performance of improve the performance by checking the product properties according to the composition ratio of polyacrylic resin. Polyacrylic resin is evaluated in three different composition ratios. When the material is selected for polyacrylic resin, it is applied to the field to understand the maintenance effect and durability.

• Journal of the Korean GEO-environmental Society
• /
• v.19 no.10
• /
• pp.21-26
• /
• 2018

Soil-water characteristic curve, which is called soil retention curve, is required to explore water flows in unsaturated soils, relative permeability of water in multi-phase fluids flow, and change to stiffness and volume of soils. Thus, the understanding of soil-water characteristic curves of soils help us explore the behavior of soils inclduing fluids. Biopolymers are environmental-friendly materials, which can be completely degraded by microbes and have been believed not to affect the nature. Thus, various biopolymers such as deacetylated power, polyethylene oxide, xanthan gum, alginic acid sodium salt, and polyacrylic acid have been studies for the application to soil remediation, soil improvement, and enhanced oil recovery. PAA (polyacrylic acid) is one of biopolymers, which have shown a great effect in enhanced oil recovery as well as soil remediation because of the improvement of water-flood performance by mobility control. The study on soil-water characteristic curves of sandy soils containing PAA (polyacrylic acid) has been conducted through experimentations and theoretical models. The results show that both capillary entry pressure and residual water saturation dramatically increase according to the increased concentration of PAA (polyacrylic acid). Also, soil-water characteristic curves by theoretical models are quite well consistent with the results by experimental studies. Thus, soil-water characteristic curves of sandy soils containing biopolymers such as PAA (polyacrylic acid) can be estimated using fitting parameters for the theoretical model.

• Nuclear Engineering and Technology
• /
• v.8 no.3
• /
• pp.159-168
• /
• 1976

Acrylic acid has been grafted onto nylon fabric with ceric salts and ${\gamma}$-rays from Co-60 as initiators. The distribution of molecular weight of the grafted polyacrylic acid has been determined and it was found that the ratio of weight-average and number-average molecular weight was higher in room temp. than in low temp. (-184$^{\circ}C$). The weight-average molecular weight of the polyacrylic acid was calculated from viscosity measurements in sodium hydroxide solution. The factors affecting graft polymerization of acrylic acid onto nylon were examined. A possible mechanism that the oxidation of nylon probably takes place at the methylene group attached to nitrogen to give a free-radical was discussed.

• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.877-891
• /
• 1998

This study was designed to observe the effects of various concentration of polyacrylic acid containing different concentration of sulfate ion on the crystal formation on the enamel surface. Experimental crystal growth solutions were made of $10\%,\;20\%,\;30\%\;and\;40\%$ polyacrylic acid(molecular weight,5,000) solutions which containing 0.1M, 0.2M, 0.3M, 0.5M, and 1.0M sulfate ion respectively. The extracted human first bicuspid enamel surface was contacted for n seconds with these solutions, washed for 15 seconds, dried, and then the crystal topography on the enamel surface was observed under the scanning electron microscope. The crystal topography were evaluated on the SEM photographs by degree of crystal coverage, crystal length, and consistency of crystal morphology, and conclusions were as the follows. 1. Polyacrylic acid solution etched slightly the enamel surface, and the difference of etching effect by its concentration was not observed. 2. The effect of concentration of polyacrylic acid on the crystal formation was less, especially that of $20\%\~40\%$ polyacrylic acid was almost not different. 3. Concentration of the sulfate ion was a determinant factor in precipitating crystals on the enamel. The experimental crystal growth solutions containing 0.1 M sulfate ion did not make crystal formation but those containing over 0.2 M sulfate ion did. 4. The degree of crystal coverage showed a tendency to increase and then decrease according to the concentration of sulfate ion in the $20\%-40\%$ polyacrylic acid. The experimental solutions containing 0.5 M sulfate ion showed the peak of degree of crystal coverage. 5. The crystal length showed a tendency to decrease by increment of sulfate ion in the polyacrylic acid solution. 6. There was a tendency to increase the frequency of random arragement of short crystals when increasing the concentration of sulfate ion in the polyacrylic acid solution. The lower concentration of sulfate ion in the polyacrylic acid solutions tended to make spherulitic arrangement of crystals, the higher concentration of sulfate ion, the more random arrangement of crystals. The experimental solutions containing 0.5M sulfate ion showed more spherulitic arrangement than random arrangement of crystals. 7. The best one of these experimental crystal growth solutions was $30\%$ polyacrylic acid solution containing 0.5M sulfate ion.

• The korean journal of orthodontics
• /
• v.28 no.6 s.71
• /
• pp.947-954
• /
• 1998

The purpose of this study was to compare shear bonding strengths and debonding patterns of the ceramic brackets attached on the crystal which were grown on the enamel surface of a tooth with different concentrations of lithium sulphate-contained polyacrylic acid in different application times. Four kinds of concentrations of mixed solutions were made and applied to the enamel surface on extracted human premolars. The solutions were made by adding 0.3M or 0.6M of lithium sulfate to $50\%\;or\;65\%$ of polyacrylic acid with 0.3M sulfuric acid. The solutions were applied for 30 or 60 seconds. After bonding, a universal testing machine was used to measure the shear bond strength, and then observations were made of debonding patterns through the stereoscope. And the enamel surface was observed through the scanning electron microscope to examine the pattern of crystal growth and debonding. The results were as follows: 1. Shear bond strength in the enamel surface treated with $50\%$ polyacrylic acid was higher than that with $65\%$ polyacrylic acid. 2. There were no statistical differences in shear bond strength according to concentration of lithium sulfate and application time of solutions . 3. Enamel surface was almost free of resin debris after debonding. 4. Enamel surface treated with $50\%$ polyacrylic acid showed higher density of crystal growth than that with $65\%$ polyacrylic acid under scanning electron microscope.

• Journal of Pharmaceutical Investigation
• /
• v.24 no.4
• /
• pp.257-263
• /
• 1994

The interpenetrating polymer networks (IPNs) of polyacrylic acid (PAA)-polyethylene glycol (PEG) were synthesized via crosslinking of PEG and simultaneous free radical polymerization of PAA. The equilibrium swelling of the IPNs matrices, ranged from 40% to 95%, was varied to a great extent as compared with PAA homopolymer due to the interpolymer interaction between PAA and PEG. The drug release kinetics of drug loaded matrices was significantly affected by the charge of drugs as well as interpolymer complexation.

• Journal of Hydrogen and New Energy
• /
• v.22 no.4
• /
• pp.546-551
• /
• 2011

The corrosion on steam generator tubes of the secondary side of pressurized water reactor inhibits heat transfer. One of the most efficient techniques improving the heat transfer performance of a nuclear electric generation is a corrosion control. The environmental parameters mostly affecting corrosion are materials and chemical additives. It seems that no further corrosion occurs in steels with Polyacrylic acid polymer dispersant treatment. Polyacrylic acid forms a protective coating with uniform thickness on metal surface. Polyacrylic treatment appears to be the most convenient way to enhance the thermal performance by the thermal conductivity improvement in steam generators.

• Restorative Dentistry and Endodontics
• /
• v.15 no.1
• /
• pp.33-43
• /
• 1990

Reactions of polyacrylic acid with hydroxyapatite, enamel and dentin were examined using infrared spectroscopy for the detection of $COO^-$ ions bonded to substrates. And also atomic aboscorption spectrophotometry and visible spectrophotometry were used to analyze the concentrations of calcium and phosphorus in the filtered solutions. The results were as follows. 1. Chemical adhesion of poly acrylic acid to hydroxyapatite, enamel and dentin was observed by infrared spectroscopy. 2. More calcium and phosphorus were detected in the filtered solutions of sodium polyacrylate-reacted specimens than in the filtered solutions of deionized Water-reacted specimens. 3. Mechanism of adhesion of polyacrylate to substrates is postulated that the bond is ionic in nature by displacement of $Ca^{2-}$ and ${PO_4}^3$ ions from the surface of substrates.