• 펄프종이기술
• /
• 제46권1호
• /
• pp.39-45
• /
• 2014

Various approaches have been tried to reduce the emission of carbon dioxide in paper industry. One of important approaches is to use PCC manufactured from emission gas as a filler. However, it was recognized that PCC is inferior to other fillers in the paper strength properties of view. Therefore, pretreatment of PCC with pulp powder was tried to mitigate the strength reduction of paper. Pretreatment of PCC with pulp powder improved the bulk(7.4~12.9%) and air permeability(24.8~42.98%), but there is no significant change in opacity. Tensile index, burst index and stiffness were decreased by the use of pretreated PCC with pulp powder. Anionic and cationic PAM were used as a additive for PCC pretreatment in order to improve strength properties. There was no significant change in bulk in all kinds of PAM used in this study. Most strength properties were improved by the pretreatment of PCC with the anionic and cationic PAM and pulp powder, although the opacity and stiffness were more or less decreased.

• 펄프종이기술
• /
• 제47권2호
• /
• pp.53-60
• /
• 2015

The effects of stirring speed during filler modification by dual polymers on flocculation and reflocculation of PCC (precipitated calcium carbonate) particles and its effect on handsheet properties were elucidated. PCC surface was modified by adsorbing A-PAM (anionic polyacrylamide) and C-starch (cationic starch) in series at various stirring speeds. It was found that increasing stirring speed during filler modification decreased the initial floc size of PCC. Continuous stirring with the same speed for filler modification resulted in the decrease of a floc size, eventually reached a steady state. The variations in a floc size was influenced by the stirring speed during filler modification: the lower the stirring speed during filler modification, the larger the floc size variations. Conclusively, the stability of PCC floc could be improved by increasing the stirring speed. In addition, the stirring speed influenced the handsheet properties. The smaller the PCC floc, the lower the strength of handseet. However, too much larger floc size also deteriorated paper strength. There exists an optimum floc size in term of paper strength which shall be controlled by stirring speed during filler modification.

• 한국식품영양과학회지
• /
• 제34권2호
• /
• pp.298-305
• /
• 2005

과채류 포장용 기능성 항균포장지는 항균력이 우수한 식물성 항균소재(botanical antimicrobial agent-grapefruit seed extract mixture: BAAG)의 CaCO$_3$분말제재와 가스흡착제 기능을 소유한 제올라이트를 일정배합비율로 펄프지료에 첨가하여 TAPPI Standard Method T200 sp-96에 의거하여 제조하였다. 아울러, 보류향상제인 cationlc polyacrylamide (Ca-PAM)와 발수처리제 alkyl ketone dimer(AKD)도 같이 첨가하였다. 이때, 사용된 BAAG분말의 평균입자크기는 12.45였으며, Scanning Electron Microscope 촬영사진에서 CaCO$_3$에 침착되어 있는 BAAG 및 제올라이트가 육면체 형태의 미세한 분말로 지료상에 구성되어 있음을 알 수 있었으며, 포장원지내에 보류된 항균제의 보유량을 회분함량으로 측정한 결과, 항균제의 첨가량을 증가시킬수록 회분함량이 증가하는 것으로 미루어 Ca-PAM이 지료 섬유 네트워크내에 항균제를 정착시키는데 매우 효과적인 보류향상제로 작용함을 알 수 있었다. 한편, 분말형 항균제와 제올라이트를 지료에 첨가하여 포장원지를 제조하였을 때, 포장원지의 인장강도(tensile strength)와 파열강도(burst strength)는 항균제와 제올라이트를 첨가하지 않았을 때보다 다소 감소하는 경향을 나타내었고, 반면에 강성(stiffness)과 인열강도(tear strength)는 증가하는 경향을 나타내었다. 그러나, 기능성 첨가제 분말의 첨가로 인하여 발생할 수 있는 골판지 상자의 라이너나 단위 포장용(itempackaging)포장지의 강도적 성질의 감소현상이 미미할 것으로 판단되어 항균포장지 제조에 사용되는 항균제와 제올라이트분말은 종이의 물성 열화에 미치는 영향이 크지 않는 것으로 나타났다.

• 한국농공학회논문집
• /
• 제56권3호
• /
• pp.47-53
• /
• 2014

We investigated the effect of straw mat cover and soil amendments on the reduction of runoff, non-point source pollution load and yield of a Chinese cabbage from alpine fields. Two plots on sandy loam soil were prepared. Experimental treatments were control and rice straw mat cover (3,300 kg/ha)+Polyacrylamide (PAM) (5 kg/ha)+Gypsum (1 ton/ha) (SPG). A variety of Chinese cabbage was cultivated and runoff was monitored during a growing season in 2012. Monitoring was conducted to seven times. Runoff rate of SPG plot was lower than those of control plot. The reduction rate of runoff from SPG plot was 29.4 % compared to control plot. The reduction rate of suspended solids (SS), total nitrogen (TN) and total phosphorus (TP) load of SPG plot was 86.5 %, 34.7 % and 39.1 %, respectively. Yield of a Chinese cabbage from SPG plot (39,646 kg/ha) was greater than that of control plots (28,482 kg/ha). It was concluded that the use of SPG on soil surface could not only reduce the NPS pollution loads in receiving waters but also help increase the crop yield.

• Geomechanics and Engineering
• /
• 제13권2호
• /
• pp.319-331
• /
• 2017

This vacuum preloading combined with polyacrylamide (PAM) flocculation was proposed to separating solid-liquid in waste slurry and to improving bearing capacity of soft soil ground. By using waste slurry taken from drilled shaft construction site in Shanghai, China, a series of settling column tests with four typical flocculants and one normal for waste slurry were carried out for comparative analysis. The optimal amounts for each flocculant were obtained from the column tests. Then, model tests on vacuum preloading with anionic polyacrylamide (APAM) flocculation and without flocculants were carried out. The out of water and the settlement of slurry surface ground were monitored during the model tests, and the changes in water content, particle-size and pore-size distributions in different positions after the model tests were measured and discussed. It is found that water content of the waste slurry without APAM flocculation changed from 204 to 195% by 24 hours standing and 15 hours vacuum preloading, while the water content of the waste slurry with APAM flocculation was declined from 163 to 96% by 24 hours standing, and was further reduced into 37% by 136 hours vacuum preloading, which shows that the combined method is feasible and effective.

• 임산에너지
• /
• 제23권1호
• /
• pp.38-44
• /
• 2004

한지의 제조에 있어서 점질물의 사용은 필수 불가결하다. 그러나 천연 점질물인 황촉규근 점액은 하절기 점도저하 문제를, 합성점제인 PAM이나 PEO 등은 수질의 영향과 응집성 및 용해성 불량이라는 문제점을 가지고 있다. 이러한 문제점을 해결할 수 있는 새로운 천연 점질물의 개발을 위하여 나무수국 점질물의 점도 및 한지 제조 특성에 관하여 조사하였다. 무처리 시료와 pH 9, 40℃에서 6 시간 처리한 시료 및 이것을 5℃에서 1주일간 보관한 시료 간의 점도 변화는 거의 없었다. pH 9로 조절한 시료를 40℃에서 120 시간 처리할 경우 점도 저하를 확인할 수 있었다. 점질물의 구성당 분석 결과 가열처리 및 pH 9로 조절은 무처리 시료에 비하여 galacturonic acid 및 glucuronic acid의 함량이 감소되었다. 나무수국 점질물의 습지 분리성 및 한지의 물성은 황촉규근 점질물과 같거나 약간 우수한 것으로 나타났다.

• 펄프종이기술
• /
• 제43권3호
• /
• pp.35-42
• /
• 2011

In this study, ground calcium carbonate (GCC) was modified by Layer-by-Layer (LbL) multilayering with polyelectrolytes. Cationic polyacrylamide (C-PAM) and poly sodium 4-styrene sulfonate (PSS) were used as cationic and anionic polyelectrolytes to modify GCC. The characteristics of the modified GCC were examined in terms of zeta potential and particle size with the addition level of polyelectrolyte and layer number. The GCC could form an assembly of cationic and anionic polyelectrolytes through consecutive adsorption process. The zeta potential of the modified GCC moved toward the cationicity and reached the plateau with the increase of the addition level of C-PAM. With layering of anionic PSS, the GCC had the negative charge. The particle size was dependent on the zeta potential. It was also observed by optical microscope. As the PSS was in the presence of the outermost layer, the GCC showed the better dispersability. It indicated that the surface charge and particle size can be controlled by adjusting the addition level of polyelectrolyte and the layer number.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제23권6호
• /
• pp.82-89
• /
• 2018

The objective of this study is to evaluate efficiencies of chemical suppressants for control of fugitive dust in ash pond of thermal power plant. In this study, $MgCl_2$, PAM (polyacrylamide), and PVA (poly vinyl alcohol) that are generally applied to suppression of fugitive dust generated from unpaved road, coal mining, storage piles and etc, were employed as chemical dust suppressants. The coal ash (coal combustion residuals) were sampled from the ash pond of Yeongheung power division in Incheon, South Korea. The characterization of the sample including particle size distribution, pH, $pH_{PZC}$ and pore volume as well as XRF analysis were carried out. The suppressant treated-samples were investigated with the wind tunnel experiments to estimate and compare the effect of suppressants on stabilization of the surface of coal ash samples. According to the results, the stability of suppressant-treated samples were significantly improved compared to water-treated samples. Among the three kinds of suppressants, PAM and PVA showed higher efficiencies and cost saving than $MgCl_2$.

• Advances in concrete construction
• /
• 제9권1호
• /
• pp.33-41
• /
• 2020

In this study, polyethylene glycol (PEG) and polyacrylamide (PAM) have been used as self-curing agents to produce self-curing concrete (SC). Compressive strength, ultrasonic pulse velocity (UPV), bulk electrical resistivity, chloride ion penetrability, water permeability, and main microstructural characteristics were examined under different curing regimes, and compared to those of the control concrete mixture with no self-curing agents. One batch of a control mixture and one batch of a SC mixture were air-cured in the lab to act as non-water-cured samples. The water curing regimes for the control mixture included continuous water curing for 3, 7, and 28 days and periodical moist curing using wetted burlap for 3 and 7 days. Curing regimes for the SC mixtures included 3 days of water curing and periodical moist curing for 3 and 7 days. SC mixtures showed better microstructure development and durability performance than those of the air-cured control mixture. A short water curing period of 3 days significantly improved the performance of the SC mixtures similar to that of the control mixture that was water cured for 28 days. SC concrete represents a step towards sustainable construction due to its lower water demand needed for curing and hence can preserve the limited water resources in many parts of the world.

• 한국식품영양과학회지
• /
• 제29권1호
• /
• pp.85-92
• /
• 2000

This study was carried out to storage of Pleurotus ostreatus packed in various trays made by different matrials-expanded polystyrene (EPS), rice straw pulp(RP), and RP trays coated with starch, carboxyl methyl cellulose (CMC), polyacrylamide (PAM), alkylketen dimer (AKD), rosin size (RS) and polyethylene glycol (PEG) at 8~1$0^{\circ}C$ and 70~80% relative hymidity for 6 days. At 6 days storage, weight increase of RP and CMC tray was lower (p<0.05) than those of others and the weight of oyster mushroom packed in RP, CMC and AKD tray decreased lower(p<0.05) than those of others. Carbon dioxide contents in trays were increased from 0.5% to 5.5%~8.6% within 1 day storage. Oxygen contents in trays were sharply decreased from 20% to 0.8%~8.2% within 1 day storage. Lightness of oyster mushroom increased all trays. Off flavor appeared stronly in oyster mushroom packed in EPS, AKD and PEG during storage, but was not detected in mushroom packed in starch and CMC until 4 days storage.