• Macromolecular Research
• /
• v.9 no.2
• /
• pp.107-115
• /
• 2001

Poly(L-lactide-co-glycolide)(PLGA) was blended with poly[$\omega$-methacryloyloxyethyl phospho-rylcholine-co-ethylhexylmethacrylate (PMEH)] (PLGA/PMEH) to endow with new functionality i.e., to improve the cell-, tissue- and blood-compatibility. The characteristics of surface properties were investigated by measurement of contact angle goniometer, Fourier-transform infrared spectroscopy with attenuated total reflectance (FTIR-ATR) and electron spectroscopy for chemical analysis (ESCA). NIH/3T3 fibroblast and bovine aortic endothelial cell were cultured on control and PLGA/PMEH surfaces for the evaluation of ceil attachment and proliferation in terms of surface functionality such as the concentration of phosphoryl-choline. Also, the behavior of platelet adhesion on PLGA/PMEH was observed in terms of the surface functionality. The contact angles on control and PLGA/PMEH surfaces decreased with increasing PMEH content from 75$^{\circ}$ to about 43$^{\circ}$. It was observed from the FTIR-ATR spectra that phosphorylcholine groups are gradually increased with increasing blended amount of MPC. The experimental P percent values from ESCA analysis were more 3.28∼7.4 times than that of the theoretical P percent for each blend films. These results clearly indicated that the MPC units were concentrated on the surface of PLGA/PMEH blend. The control and PLGA/PMEH films with 0.5 to 10.0 wt% concentration of PMEH were used to evaluate cell adhesion and growth in terms of phosphorylcholine functionality and wettability. Cell adhesion and growth on PLGA/PMEH surfaces were less active than those of control and both cell number decreased with increasing PMEH contents without the effect of surface wettability. It can be explained that the fibronectin adsorption decreased with an increase in the surface density of phosphorylcholine functional group. One can conclude the amount of the protein adsorption and the adhesion number of cells can be controlled and nonspecifically reduced by the introduction with phosphorylcholine group. Morphology of the adhered platelets on the PLGA/PMEH surface showed lower activating than control and the number of adhered platelets on the PLGA/PMEH sample decreased with increasing the phosphorylcholine contents. The amount of fibrinogen adsorbed on the PLGA/PMEH surface demonstrated that the phospholipid polar group played an important role in reducing protein adsorption on the surface. In conclusion, this surface modification technique might be effectively used PLGA film and scaffolds for controlling the adhesion and growth of cell and tissue, furthermore, blood compatibility of the PLGA was improved by blending of the MPC polymer for the application of tissue engineering fields.

• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.4
• /
• pp.503-508
• /
• 2007

Small scale D-water treatment plant(WTP) where has slow sand filtration was using raw water containing high concentration of manganese (> 2mg/l). The raw water was pre-chlorinated for oxidation of manganese and resulted in difficulty for filtration. Thus, sometimes manganese concentration and turbidity were over the water quality standard. Two stage rapid manganese sand filtration pilot plant which can treat $200m^3/d$ was operated to solve manganese problem in D-WTP. The removal rate of manganese and turbidity were about 38% and 84%, respectively without pH control of raw water. However, when pH of raw water was controlled to average 7.9 with NaOH solution, the removal rate of manganese and turbidity increased to 95.0% and 95.5%, respectively and the water quality of filtrate satisfied the water quality standard. Manganese content in sand was over 0.3mg/g which is Japan Water Association Guideline. The content in upper filter was 5~10 times more than that of middle and lower during an early operation but the content in middle and lower filter was increased more and more with increase of operation time. This result means that the oxidized manganese was adsorbed well in sand. Rapid manganese sand filter was backwashed periodically. The water quality of backwash wastewater was improved by sedimentation. Thus, turbidity and manganese concentration decreased from 29.4NTU to 3.09NTU and from 1.7mg/L to 0.26mg/L, respectively for one day. In Jar test of backwash wastewater with PAC(Poly-aluminum chloride), optimum dosage was 30mg/L. Because the turbidity of filtrate was high as 0.76NTU for early 5 minute after backwash, filter-to-waste should be used after backwash to prevent poor quality water.

• The Korean Journal of Mycology
• /
• v.13 no.4
• /
• pp.235-241
• /
• 1985

The present study was designed to investigate biosynthetic patterns of polysaccharides under catabolic repression and derepression in Saccharomyces uvarum. Correlation coefficients between polysaccharide synthesis and polyphosphate accumulation were examined, according to the culture phase and under various phosphate concentrations (free, limited, sufficient). During catabolic derepression, biosynthesis of glycogen was enhanced. rapidly and highly in the cells grown on minimal medium, compared with those grown on the complete medium. Acid soluble glycogen type was the main component of total glycogen and alkali soluble glycogen was synthesized in small amount, after 24 hr culture, at the time of almost exhaustion of sugar in the medium. Total glycogen was accumulated highly in proportion to the amount of phosphate added to the medium. It could be postulated that type 'C' isoenzyme among ALPase was directly or indirectly correlated with the glucan synthesis. Mannan synthesis indicated maximal amount at the early exponential phase and stationary phase, and also acid soluble sugars at the stationary phase. Correlation coefficient between the mannan synthesis and poly-p-'C' accumulation, and also between mannan synthesis and phospholipid content indicated 0.866 and 0.726, respectively.

• Polymer(Korea)
• /
• v.30 no.1
• /
• pp.80-84
• /
• 2006

2-Biphenylyl acrylate(BPA) was synthesized by the reaction of acryloyl chloride with 2-phenylphenol (2PP). Hydrophilic copolymers with the moiety of the microbicide, 2PP, were prepared by the radical copolymerization of BPA and methacrylic acid (MA). From the compositions of the BPA unit and the MA unit in the copolymers, the monomer reactivity ratios were determined to be 0.86 for BPA and 1.21 for MA by means of Kelen-Tudos plot. This result indicates that the copolymers have a random structure. The amount of 2PP released through the hydrolysis of the copolymers was examined by UV spectrometry. The result showed that the release of 2PP increased with an increase in the hydrophilic MA content in the copolymers and with an increase in the pH of the release medium. Therefore, these results indicate that the hydrophilic polymers bearing 2-phenylphenol moiety can be controlled release microbicides.

• Korean Journal of Microbiology
• /
• v.27 no.1
• /
• pp.63-69
• /
• 1989

A pink-pigmented facultative methylotrophic bacterium, Methylobacterium sp. strain SY1, was isolated from soil through methanol-enrichment culture technique. The isolate was gram-negative, slightly curved rod, and motile by a single polarly inserted flagellum. The colony was smooth, bright pink, and slimy. The guanine plus cytosine content of the KNA was 66%. The cell was obigately aerobic and exhibited both catalase and oxidase activities. Carotenoid pigment and poly-$\beta$-hydroxybutyrate were present. It was found to have three kinds of plasmid with molecular weights 45,000, 38,500 and 23,000. Growth with methanol(0.5%) was fast ($t_{d}$=6.5h) and was optimal at $30^{\circ}C$ and at pH 7.0. The isolate could grow on several sugars, organic acids, amino acids, amines, and alcohols in addition to the methanol. Methanol was found to be assimilated through the serine pathway.

• Journal of the Korean Chemical Society
• /
• v.62 no.4
• /
• pp.269-274
• /
• 2018

Surface renewable nano-$RuO_2$/poly(methyl methacrylate) polymeric composite pH electrodes were prepared. The composite electrode with 53 wt% of nano-$RuO_2$ showed similar good response characteristics to nano-$IrO_2$ composite electrode reported earlier. It showed response slope of -58.7 mV/pH, response time of <1 s, surface renewability of $-57.0{\pm}0.3mV/pH$ (n=5) and long time stability for a month as well as low interferences but high interferences by electrochemically active species like $I^-$ and $Fe(CN){_6}^{3-}$. However, the response slope and time became worse at higher pH than 9 compared to those of nano-$IrO_2$ composite electrodes possibly due to the difference of physical properties resulting from higher content of nano-$RuO_2$ in polymeric composite matrix.

• Korean Journal of Soil Science and Fertilizer
• /
• v.18 no.1
• /
• pp.20-26
• /
• 1985

Under the field condition mulched by polyethylene film, changes of the soil moisture content and soil temperature due to the meteorological influence, which have had a great effect upon productivity of upland - field crop, was investigated. The results obtained were as follows; 1. During the early growth stage from the first part of April to the last part of May, soil temperature at 15cm below the mulched surface of ridge (13:00) was about $5^{\circ}C$ higher than that of non-mulched plot. 20 days earlier than normal soil temperature reached up to $20^{\circ}C$ due to the mulching. The increasing of soil temperature resulted from poly ethylene film mulching had a similar tendency for the annual experiment of 3 years (1982-1984). 2. Changes of the soil moisture content in the plow layer during the growing season was remarkably less in the mulched plot than in the non-mulched plot due to suppression of evaporation by polyethylene film. 3. Soil moisture contents of the plots planted with tobacco was lower than those of the non-planted plots owing to the more transpiration induced by growing of the tobacco plant. As the results, it was refered that initial fresh weight of above ground part of tobacco that had an influence upon the consumption of soil moisture by the transpiration rather than evaporation was about 250g per plant. 4. At the appreciable amount of rainfall (for instance; 63.5mm), soil moisture content at middle place between plants in the plow layer of the mulched plot was not increased owing to the infiltration interruption by polyethylene film. 5. By the comparatively small amount of rainfall (e.g. 20mm) after the drought period, leaf water potential of the mulched plot was not increased as much as that of the non-mulched plot owing to the less moisture content of soil resulted from interruption of rainfall.

• Journal of the Korean Ceramic Society
• /
• v.39 no.2
• /
• pp.113-119
• /
• 2002

The effect of ultrasonic radiation is reported for silica-poly(ethylene glycol) system prepared without the solvent using sol-gel processing by varying various parameters such as ultrasonic irradiation time, PEG content and HCl/TEOS molar ratio. The property of sonogel is compared with classic gel which has been prepared with ethanol as a solvent by traditional sol-gel processing. SEM, BET, DTA-TGA, density and Vickers hardness measurements are carried out for analyzing the samples. The gelation time is found strongly dependent on radiation time, PEG content and pH value, and has been discussed on the basis of existing theories. The $SiO_2-10$ & 20 wt% PEG sonogel exhibited superior optical, physical and gel properties as compared to the classic gel, hence, found suitable for device applications. The ultrasonic radiation increased the density and surface area, and also reduced the pore size which is well supported by the shift in the peak of DTA curve. The DTA thermogram was found similar to that of pure silica gel.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.9
• /
• pp.1537-1543
• /
• 2004

The purpose of this study was to determine the effect of dietary linseed oil and canola oil on the deposition n-3 polyunsaturated fatty acid in pork. Twelve pigs weighing 50 kg were offered one of four diets based on corn and soybean meal and containing tallow, linseed oil, canola oil or mixed oil (linseed oil plus canola oil). The pigs were slaughtered at approximately 110 kg of their market live weight. Linseed oil, canola oil or mixed oil did not affect any of the three indicators of growth performance-body weight gain, feed intake and feed efficiency. Saturated fatty acid content of plasma was the highest in tallow oil group, while the plasma proportion of saturated fatty acid was lowered in linseed oil, canola oil and mixed oil group from 11.84% to 16.54% than tallow group (p<0.05). The plasma n-3 polyunsaturated fatty acid was not detected at all in the tallow-fed pigs, while the plasma proportion of n-3 polyunsaturated fatty acid were higher in linseed oil, canola oil and mixed oil from 4.68% to 12.83% than tallow group (p<0.05). All three lipid supplements containing n-3 poly-unsaturated fatty acid increased the content of pork belly $\alpha$-linolenic acid (18:3n-3) by 9.43% relative to the tallow values (p<0.05). Feeding linseed oil or canola oil increased the n-3 : n-6 ratio in pork belly to 0.68, and increased the polyunsaturated fatty acid : saturated fatty acid ratio to 0.70 (p<0.05). This result showed that feeding linseed oil and canola oil can produce novel functional pork enriched in n-3 polyunsaturated fatty acid.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.3
• /
• pp.435-442
• /
• 2001

Poly(3-hydroxy-5-phenylvalerate) [P(3HPV)] was efficiently accumulated from 5-phenylvalerate (5PV) in Pseudomonas putida BM01 in a mineral salts medium containing butyric acid (BA) as the cosubstrate. A nove aromatic copolyester, poly(5 mol% 3-hydroxy-4-phenylbutyrate-co- 95 mol% 3-hydroxy-6-phenylhexanoate) [P(3HPB-co-3HPC)] was also synthesized from 6-phenylhexanoate (6PC) plus Ba. The two aromatic polymers, P(3HPV) and P(3HPB-co-3HPC), were found to be amorphous and showed different glass-transition temperatures at $15^{\circ}C$ and $10^{\circ}C$, respectively. When the bacterium was grown ina medium containing 20 mM 5PV as the sole carbon source for 140 h, 0.4 g/l of dry cells was obtained in a flask cultivation and 20 wt% of P(3HPV) homopolymer was accumulated in the cells. However, when it was grown with a mixture of 2 mM 5PV and 50 mM BA for 40 h, the yield of dry biomass was increased up to 2.5 g/l and the content of P(3HPV) in the dry cells was optimally 56 wt%. This efficient production of P(3HPV) homopolymer from the mixed substrate was feasible because BA only supported cell growth and did not induce any aliphatic PHA accumulation. The metabolites released into the PHA synthesis medium were analyzed using GC or GC/MS. Two $\beta$-oxidation derivatives, 3-phenylpropionic acid and trans-cinnamic acid, were found in the 5V-grown cell medium and these comprised 55-88 mol% of the 5PV consumed. In the 6PC-grown medium containing Ba, seven ${\beta}$-oxidation and related intermediates were found, which included phenylacetic acid, 4-phenylbutyric acid, cis-4-phenyl-2-butenoic acid, trans-4-phenyl-3-butenoic acid, trans-4-phenyl-2-butenoic acid, 3-hydroxy-4-phenylbutyric acid, and 3-hydroxy-6-phenylhexanoic acid. Accordingly, based on the metabolite analysis, PHA synthesis pathways from the two aromatic carbon sources are suggested.