• 한국전기전자재료학회논문지
• /
• 제21권10호
• /
• pp.923-929
• /
• 2008

On the piezoelectric polymer, PVDF (poly vinylidene fluoride), the transparent conducting oxide (TCO) electrode material thin film was deposited by roll to roll sputtering process mentioned as a mass product-friendly process for display application. The deposition method for ITO Indium Tin Oxides) as our TCO was DC magnetron sputtering optimized for polymer substrate with the low process temperature. As a result, a high transparent and good conductive ITO/PVDF film was prepared. During the process, especially, the gas mixture ratio of Ar and Oxygen was concluded as an important factor for determining the film's physical properties. There were the optimum ranges for process conditions of mixture gas ratio for ITO/PVDF From these results, the doping mechanism between the oxygen atom and the metal element, Indium or Tin was highly influenced by oxygen partial pressure condition during the deposition process at ambient temperature, which gives the conductivity to oxide electrode, as generally accepted. With our studies, the process windows of TCO for display and other application can be expected.

• 멤브레인
• /
• 제23권4호
• /
• pp.312-318
• /
• 2013

Poly vinylidene fluoride (PVDF) 중공사막을 polyethylenimine (PEI)와 p-xylylene dichloride (XDC)를 이용해 친수화 시킨 후 poly(vinyl alcohol) (PVA)과 가교제인 poly(acrylic acid-co-maleic acid) (PAM) 혼합용액을 코팅하여 막을 제조하였다. 중공사막 표면의 코팅여부는 scanning electron microscope (SEM)을 통해 관찰하였으며, 막의 특성평가를 위해 물/에탄올 혼합액에 대한 투과증발 실험을 수행하였다. 공급액 조성은 90 wt% 에탄올 수용액을 사용하였으며, 가교제 농도, 공급액과 반응온도 변화에 따른 투과도 및 선택도를 측정하였다. 투과도는 반응온도 $100^{\circ}C$, PAM 농도 3 wt%, 공급액온도 $70^{\circ}C$에서 $1,480g/m^2hr$, 그리고 선택도는 반응온도 $100^{\circ}C$, PAM 농도 15 wt%, 공급액온도 $25^{\circ}C$에서 ${\alpha}_{W/E}=82$의 결과를 얻을 수 있었다.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 가을 학술발표회 논문집
• /
• pp.193-194
• /
• 2003

전기활성 고분자인 poly(vinylidene fluoride)(PVDF)를 전기 비활성 고분자와 블렌드시키는 경우 어떤 블렌드계에서는 용융 온도 이상에서 LCST(lower critical solution temperature) 상분리 거동을 나타내는데[1,2], 이때 외부 전장을 가해주면 이들의 상분리 거동에 영향을 미칠 수 있다[3]. PVDF와 블렌딩시켰을 때 LCST 상분리 거동을 나타내는 고분자로는 poly(methyl methacrylate), poly(ethyl methacrylate), poly(1,4-butylene adipate) (PBA) 등이 있다[l,3]. (중략)

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.214.2-214.2
• /
• 2011

In this work, porous carbon based electrodes are prepared by carbonization using poly(vinylidene fluoride) (PVDF)/carbon nanotube (CNT) composites to further increase the specific capacitance for supercapacitors. Electrode materials investigate the aspects of specific capacitance, pore size distribution and surface area: influence of carbonization temperatures of PVDF/CNT composites. The electrochemical properties are investigated by cyclic voltammetry, impedance spectra, and galvanostatic charge-discharge performance with in $TEABF_4$ (tetraethylammonium tetrafluoroborate)/acetonitrile as non-aqueous electrolyte. From the results, the highest value of specific capacitance of ~101 $F{\cdot}g^{-1}$ is obtained for the samples carbonized at $600^{\circ}C$. Furthermore, pore size of samples control be low 7 nm through carbonization process. It is suggested that micropores significantly contribute to the specific capacitance, resulting from improved charge transfer.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1998년도 봄 학술발표회 논문집
• /
• pp.54-57
• /
• 1998

Recently, Manley's group published several papers on the blend of PVDF and poly(1, 4-butylene adipate) (PBA) chosen as a model system of somicrystallineisemicrystalline polymer blend.[1-4]. This blend system has several advantages over the other PVDF/semicrystalline polymer blends.(omitted)

• Composites Research
• /
• 제33권1호
• /
• pp.19-24
• /
• 2020

본 연구에서는 Poly(vinylidene fluoride) (PVDF) 필름 제작 과정 중 마이크로웨이브 처리 과정을 도입하여 β 결정성 향상에 어떠한 영향을 미치는지 분석하였다. 또한, 나노 입자 보강제로써 금속산화물인 TiO₂를 혼합하여 PVDF 복합재료 필름을 만들어, 전기적 음성도 차이로 인한 반데르발스 힘을 통해 β 결정 형성을 추가적으로 향상시키려고하였다. FTIR과 XRD 분석을통하여해당필름시편들에대해결정화도(Crystallinity) 및결정성(Crystalline)을 분석하였다. 이러한 분석 결과를 바탕으로, 용매 증발 과정 중 마이크로웨이브 처리 과정이 PVDF 필름의 결정화도를 높여주는 것을 확인하였고, 추가적인 연신(Stretching) 공정을 통해 α 결정에서 β 결정 변화(Crystalline phase change)가 발생함으로써 결과적으로 더 많은 β 결정성을 나타내었다. 그리고 금속산화물을 넣은 PVDF 복합재료 필름이 Neat PVDF 필름보다 상대적으로 더 높은 β 결정성을 나타내는 것을 확인하였다.

• Journal of Electrochemical Science and Technology
• /
• 제9권1호
• /
• pp.1-8
• /
• 2018

The effect of mixing ratio on the corrosion protection of carbon steel coated by a film composed of poly(vinylidene) fluoride (PVDF) and poly(methyl methacrylate) (PMMA) was examined using electrochemical impedance spectroscopy. Surface crystallization behavior and thermal properties of the PVDF/PMMA coated carbon steel were evaluated using polarized optical microscopy and differential scanning calorimetry, respectively. A Maltese cross-pattern spherulite crystal was observed in the PVDF/PMMA coating film, which became more apparent with increasing PVDF content. The highest corrosion protection performance was achieved with 60 wt.% PVDF-coated carbon steel, and delamination and corrosion reactions were observed for 20 wt.% PVDF-coated carbon steel. Further, corrosion protection performance with an amorphous/crystal mixture (PVDF/PMMA, 60/40 (w/w)) was better than those observed in the amorphous domain and the perfect-crystal domain of the PVDF/PMMA blended coating system.

• 한국안전학회지
• /
• 제19권3호
• /
• pp.26-31
• /
• 2004

The radiation-induced changes taking place in poly(vinylidene fluoride) (PVDF) exposed to $^{60}Co$ $\gamma-ray$ irradiation were investigated in correlation with the applied doses. Samples were irradiated in air at room temperature by $^{60}Co$ $\gamma-ray$ to doses in the range of 200 to 1000kGy. Various properties of the irradiated PVDF were studied using FTIR, differential scanning calorimetry (DSC), gel fraction and elongation. $^{60}Co\gamma-ray$ irradiation was found to induce changes in chemical, thermal, mechanical and structural properties of PVDF and such changes vary depending on the radiation dose.

• 멤브레인
• /
• 제27권2호
• /
• pp.189-198
• /
• 2017

본 연구는 수처리 분리막에 제조하기 위하여 열유도 상분리법(thermally induced phase separation, TIPS)을 이용하였고, 기계적 물성과 내화학성이 우수한 폴리플루오르화비닐리덴(poly(vinylidene fluoride)(PVDF)) 고분자와 실리카를 이용하여 특성평가를 진행하였다. 특성평가에 사용된 희석제는 dioctyl phthalate (DOP), dibutyl phthalate (DBP)를 사용하였으며, PVDF와 실리카의 비율에 따른 분리막 제조 조건을 알아보기 위하여 결정화 온도, 흐림점, SEM 이미지 등을 관찰하였다. 실리카의 함량이 증가할수록 결정화 온도와 흐림점이 증가하였음을 확인하였고, 상평형도 작도를 통하여 분리막 제조 조건을 확인하였다.

• 한국의류산업학회지
• /
• 제13권2호
• /
• pp.279-284
• /
• 2011

In this study, the process of preparation nonwoven with coated carbon nano fibers (CNFs) /poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) composite solution is described. The various contents of CNFs/PVDF-HFP composite coated nonwoven were prepared and characterized by morphological, mechanical, and electrical methods. Nonwovens are coated with CNFs/PVDF-HFP composite solution and decreased the pick up ratio with increasing CNFs contents in range from 0% to 16%. In the results of SEM images, it was clear that the CNFs were evenly distributed in coated nonwoven by SEM images, the existence of CNFs in coated nonwoven was confirmed regularly. The mechanical properties of various contents of CNFs/PVDF-HFP coated nonwoven were examined. The tensile linearity and compression linearity increased with increasing CNFs contents. The electrical properties of the CNFs/PVDF-HFP coated nonwoven increased with increasing CNFs contents.