• Macromolecular Research
• /
• v.17 no.11
• /
• pp.912-918
• /
• 2009

An optically active diacid containing the L-histidine moiety was prepared by reacting pyromellitic dianhydride (1,2,4,5-benzenetetracarboxylic acid 1,2,4,5-dianhydride) 1 with L-histidine 2 in acetic acid, and was polymerized with several aromatic diamines 5a-g to obtain a new series of optically active poly(amide-imide)s (PAIs) using two different methods, such as direct polycondensation in a medium consisting of N-methyl-2-pyrrolidone (NMP)/triphenyl phosphite (TPP)/calcium chloride ($CaCl_2$)/pyridine (Py) and direct polycondensation in a tosyl chloride (TsCl)/pyridine (Py)/N,N-dimethylformamide (DMF) system as a condensation agent. The resulting new polymers 6a-g with inherent viscosity was obtained in good yield. The polymers were readily soluble in polar organic solvents, such as N,N-dimethyacetamide (DMAc), N,N-dimethyformamide (DMF), and dimethyl sulfoxide (DMSO). The obtained polymers were characterized by FTIR, specific rotation, elemental analysis as well as $^1$H-NMR spectroscopy and gel permeation chromatography (GPC). The thermal stability of the resulting PAIs was evaluated with thermogravimetric analysis techniques under a nitrogen atmosphere.

• Membrane Journal
• /
• v.23 no.2
• /
• pp.176-184
• /
• 2013

To investigate the performance of VOC separation, composite hollow fiber membrane was prepared which composed of poly (ether imide) support prepared by phase separation method and poly (dimethylsiloxane) coating active layer. The performances of the membranes for the application of recovery process in terms of their morphology, gas permeance test for $N_2$ and $O_2$ gases. Durability against benzene, toluene and xylene was also investigated. And permeation test for multi-component VOCS through the membrane with different feed concentration and stage-cut were investigated. Permeance of PEI supported membrane and the membranes coated with PDMS decreased from 45,000 GPU to 63 GPU and 49,450 to 30 GPU for $N_2$ and $O_2$, respectively. Recovery efficiency and concentration of VOCs in permeate increased with decreasing stage-cut. VOCs concentration in permeate proportionally increased with increasing feed concentration but concentration ratio and recovery efficiency showed any noticeable changes with feed concentration change.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.3
• /
• pp.357-362
• /
• 2003

The pathway producing imide ring closure during the thermal imidization of poly(amic acid) (PAA) was investigated in detail using a new analytical method, two-dimensional (2D) Raman correlation spectroscopy. The signs of the cross peaks in synchronous spectra provided evidence of the thermal imidization of PAA into PI as the heating temperature increased. The signs of the cross peaks in asynchronous spectra suggested that the imide-related modes changed prior to the amide or carboxylic mode, which indicates that cyclization occurred before the amide proton was abstracted.

• Korean Chemical Engineering Research
• /
• v.55 no.3
• /
• pp.296-301
• /
• 2017

Recently, there are many efforts focused on development of more economical non-fluorinated membranes for PEMFCs (Proton Exchange Membrane Fuel Cells). In this study, sulfonated poly (ether ether ketone) (sPEEK) membrane reinforced with poly imide was made to enhance of membrane durability. In order to test durability of single (un-reinforced) membrane and reinforced membrane MEA (Membrane and Electrode Assembly), degradation accelerated stress test was used. Before and after degradation, I-V polarization curve, hydrogen crossover current, electrochemical surface area, membrane resistance and charge transfer resistance were measured. As a result of experiments, hydrogen crossover current of reinforced MEA was lower than that of single MEA, therefor durability of reinforced MEA was higher than that of single MEA. There was not especially short phenomena in reinforced MEA after degradation accelerated stress test.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2004.11a
• /
• pp.72-72
• /
• 2004

• Proceedings of the Korean Fiber Society Conference
• /
• 1995.04a
• /
• pp.21-21
• /
• 1995

• Proceedings of the Membrane Society of Korea Conference
• /
• 2000.11a
• /
• pp.39-42
• /
• 2000

• Macromolecular Research
• /
• v.17 no.10
• /
• pp.739-745
• /
• 2009

N,N'-(bicyclo[2,2,2]oct-7-ene-tetracarboxylic)-bis-L-amino acids 3a-g were synthesized by the condensation reaction of bicyclo[2,2,2]oct-7-ene-2,3,5,6-tetracarboxylic dianhydride 1 with two equimolars of Lalanine 2a, L-valine 2b, L-leucine 2c, L-isoleucine 2d, L-phenyl alanine 2e, L-2-aminobutyric acid 2f and L-histidine 2g in an acetic acid solution. Seven new poly(amide-imide)s PAIs 5a-g were synthesized through the direct polycondensation reaction of seven chiral N,N'-(bicyclo[2,2,2]oct-7-ene-tetracarboxylic)-bis-L-amino acids 3a-g with bis(3-amino phenyl) phenyl phosphine oxide 4 by two different methods: direct polycondensation in a medium consisting of N-methyl-2-pyrrolidone (NMP)/triphenyl phosphite (TPP)/calcium chloride ($CaCl_2$/pyridine (py), and direct polycondensation in a tosyl chloride (TsCl)/pyridine (py)/N,N-dimethylformamide (DMF) system. The polymerization reaction produced a series of flame-retardant and thermally stable poly(amide-imide)s 5a-g with high yield. The resulted polymers were fully characterized by FTIR, $^1H$ NMR spectroscopy, elemental analyses, inherent viscosity, specific rotation and solubility tests. Data obtained by thermal analysis (TGA and DTG) revealed that the good thermal stability of these polymers. These polymers can be potentially utilized in flame retardant thermoplastic materials.

• Polymer(Korea)
• /
• v.26 no.6
• /
• pp.701-709
• /
• 2002

To synthesize a new positive photosensitive polyimide precursor, parts of carboxylic acid groups in poly (amic acid) were esterified with 4,5-dimethoxy-2-nitrobenzyl bromide in the presence of K$_2$CO$_3$/HMPA followed by the chemical imidization of residual carboxylic acid units. The chemical structure of resulting polymer was characterized by $^1$H-NMR, UV/vis and FT-IR spectroscopic methods, and its thermal properties were examined by DSC and TGA. Upon UV irradiation, 4,5-dimethoxy-2-nitrobenzyl moiety underwent the photodegradation. As a result, the polymer became soluble in alkaline developer due to the formation of carboxylic acid moiety, which was used to make a micron-sized positive pattern. Sensitivity curves were obtained from the gel fraction experiments with respect to the various 4,5-dimethoxy-2-nitrobenzyl ester contents. From those curves, the sensitivity was ranged iron 4000 to 6000 mJ/㎠, and the contrast was measured to be from 3.1 to 4.9.

• Polymer(Korea)
• /
• v.33 no.1
• /
• pp.91-95
• /
• 2009

We fabricated the electromagnetic (EM) noise absorber films for high temperature use by blending a soft magnetic powder with poly(amide imide) (PAI). The EM noise absorber films of PAI/soft magnet composite were prepared by casting the solution of poly(amide amic acid)/soft magnet powder into glass substrate with casting applicator device and then thermal imidization. The obtained films were fully characterized and their physical properties including thermal behavior, thermal stability and mechanical properties were studied. The EM noise absorption ability was also investigated using micro-strip line method. At 1 GHz, the power loss of composite film with 150 ${\mu}m$ thickness was about 25%.