• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.258-258
• /
• 2009

본 연구에서는 P3HT(Poly(3-hexylthiophene-2))와 PCBM ([6,6]-phenyl-C61-butyric acid methyl ester)를 donor, acceptor물질로 사용하고 Toluene, DCB, CB를 용매로 함으로써 각각의 경우에 대한 효율과 특성을 분석하였다. 그 결과, CB을 이용한 태양전지가 후 열처리 과정을 거친 후 가장 높은 효율을 보였으며, 광흡수율 측면에서는 열처리를 하였을 경우와 하지 않은 경우 모두에서 DCB가 뛰어났으나 다른 용매에 비하여 열처리를 통한 성능의 개선 효과는 가장 미비하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.486-489
• /
• 2003

Red organic electroluminescent(EL) devices based on poly(N-vinylcarbazole)(PVK) and tris(8-hydroxyquinorine aluminum)($Alq_3$) doped with red emissive material, 4-(dicyanomethylene)-2-t-butyl-6-(1,1,7,7-tetramethyljulolidyl-9-enyl)4H-pyran(DCJTB), poly(3-hexylthiophene)(P3HT), Rubrene and 4-dicyanomethylene-2-methyl-6[2-(2,3,6,7-tetrahydro-1H,5H-benzo-[i.j])quinolizin-8yl)vinyl-4H-pyran(DCM2) were fabricated. We examine the energy transfer from $Alq_3$ to DCJTB, P3HT, Rubrene and DCM2 by comparing between the PL and EL spectrum. The maximum peak PL intensities were achieved when the doping concentration of DCJTB, DCM2, P3HT and Rubrene has 5, 1, 0.5, 2wt%, respectively. The maximum luminance of device using DCJTB showed $594\;cd/m^2$ at 15V.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.1
• /
• pp.81-85
• /
• 2015

The organic/inorganic hybrid photovoltaic devices have been studied using Poly(3-hexylthiophene-2,5-diyl) (P3HT) : [6, 6]-Phenyl C61 butyric acid methyl ester (PCBM) and GaN. We traced the effect of short circuit current density with different annealing method under the various concentration and ratio of P3HT:PCBM. During the pre-annealing course, the heat treatments were performed each time at low temperature after the organic layer coated and the samples were heated at high temperature through one or two steps under the post-annealing process. It revealed that the samples with post-annealing process had higher values of short circuit current density than the other samples upon pre-annealing. And the interesting high short circuit current density features were observed at 1:1 mixing ratio and 1wt% of P3HT:PCBM.

• Rapid Communication in Photoscience
• /
• v.3 no.2
• /
• pp.32-34
• /
• 2014

We report the performance improvement of electrochromic devices for modulating the transmittance contrast of long wavelength infrared light between 1.5 and 5.0 ${\mu}m$ based on a double layer of conducting polymers. The device, fabricated with poly(3-hexylthiophene) (P3HT) and poly(3,4-ethylenedioxythiophene) (PEDOT) as the first and second layers, respectively, showed an transmittance contrast of 60% with a response rate under 5 s, which is greater than the transmittance contrast of cells based on only P3HT or PEDOT (approximately 40%).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.05a
• /
• pp.27-31
• /
• 2001

We fabricated organic electroluminescent(EL) devices with mixed emitting layer of poly(N-vinylcarbazole)(PVK), 2,5-bis(5'-tert-butyl-2-benzoxazoly)thiophene(BBOT), N,N'-diphenyl-N,N'-(3-methyphenyl)-1,1'-biphenyl-4, 4'-diarnine(TPD) and poly(3-hexylthiophene)(P3HT). To improve the external quantum efficiency of EL devices, we added the functional layer to the devices such as LiF insulating layer, carrier confinement layer(BBOT) and hole injection layer(CuPc). In the ITO/emitting layer/Al device, the maximum quantum efficiency at 15V was $1.88{\times}10^{-5}%$. And then, it is increased by a factor of 27 to $5.2{\times}10^{-3}%$ in ITO/CuPc/emitting layer/BBOT/LiF/Al device at 15V.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.9
• /
• pp.762-767
• /
• 2001

We report the white light emission from the multilayer organic electroluminescent(EL) device using exciplex emission. The exciplex at 500nm originated between poly(N-vinylcarvazole)(PVK) and 2,5-bis(5'-tert-butyl-2-benzoxazoly)thiophene(BBOT) and exciplex of 50nm originated from N,N'-diphenyl-N,N'-(3-methyphenyl)-1,1'-biphenyl-4,4'-diamine(TPD) and BBOT were observed. Also, the energy transfer from PVK to BBOT and poly(3-hexylthiophene)(P3HT) in mixed emitting materials was occurred. The electroluminescence(EL) spectra of organic EL device which have a device structure of ITO/CuPc(5nm)/emitting layer(100nm)/BBOT(30nm)/LiF(1.4nm)/Al(200nm) were slightly changed as a function of the applied voltage. The luminance fo 12.3 ${\mu}$W/$\textrm{cm}^2$ was achieved at 20V and EL spectrum measured at 20V corresponds to Commission Internationale de L\`Eclairage(CIE) coordinates of x=0.29 and y=0.353.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2004.08a
• /
• pp.146-146
• /
• 2004

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.351-354
• /
• 2001

We fabricated organic electroluminescent(EL) devices with mixed emitting layer of poly (N- vinylcarbazole) ( PVK) , 2,5-bis (5-tert-butyl -2- benzoxaBoly) thiophene ( BBOT) , N,N-diphenyl-N,N- (3-methyphenyl) -1,1-biphenyl-4, 4-thiamine(TPD) and poly(3-hexylthiophene) (P3HT) deposited by LB(Langumuir-Boldgett) method. From the AFM(atomic force microscope) images, the monolayer containing 30% of AA(arachidic acid) showed a roughness value of 28$\AA$. In the voltage-current characteristics of ITO/Emitting layer/BBOT/LiF/A1 devices, current density much smaller than that of the spin-coated devices having a same thickness.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.308-311
• /
• 2000

The organic electroluminescene (EL) device has gathered much interested because of its potential in materials and simple device fabrication. We fabricated EL device which have a mixed single emitting layer containing N,N'-diphenyl-N,N'-(3-methylphenyl)-1,1'-biphenyl-4,4'-diamine [TPD] and poly(3-hexylthiophene) [P3HT]. The molar ratio between P3HT and TPD chaged with 1:1, 3:1, 5:1, 3:2 and 5:2. EL intensity of ITO/P3HT+TPD/Mg:In devices is enhanced by addition of TPD into P3HT. This can be explained that the energy transfer occurs from TPD to P3HT. Recombination probability increases in emitting layer because that TPD as hole transport material plays a role more injection hole and Mg:In (3.7eV) electrode has low work function make easily electron injection. ITO/P3HT+TPD(5:2)/Mg:In devices emit orange-red light at 28V.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.446-446
• /
• 2013

유기태양전지는 가벼운 무게와 우수한 유연성을 가져 플렉서블 태양전지 및 롤투롤(Roll-to-roll) 인쇄 공정에 대한 적용 가능성 때문에 많은 연구가 이루어지고 있다. 하지만 이종접합 유기태양전지를 상용화하기 위해서는 낮은 전력 변환 효율 (PCE)을 증진하는 연구가 필요하다. 본 연구에서는 간단한 용액공정을 통해 poly (3-hexylthiophene) (P3HT) 나노구조층을 사용하여 indium-tin-oxide 양극 전극/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) 정공수송층/P3HT 나노구조층/P3HT 복합체로 제작한 나노구조층/C60 전자수송층 /lithium quinolate 전자주입층/Al 음극 전극 구조의 유기태양전지를 제작하였다. 전류밀도-전압 곡선 결과는 P3HT 복합체 이용한 나노구조층를 가진 유기태양전지의 구조는 평면층을 가진 유기태양전지에 비해서 PCE가 향상됨이 관찰되었다. 유기태양전지는 짧은 엑시톤의 확산거리가 PCE 감소의 주요 원인이 된다. P3HT 복합체를 사용한 나노구조층을 가지는 유기태양전지는 광활성층과 전자수송층 사이의 계면이 넓어지는 효과를 가진다. 계면이 넓어지는 효과를 통해 생성된 엑시톤을 효율적으로 분리할 뿐만 아니라 더 많은 양의 전하를 생성할 수 있기 때문에 전하의 양이 증가되고 더 높은 전류를 생성하여 PCE를 효과적으로 높일 수 있다.