• Proceedings of the Korean Fiber Society Conference
• /
• 2007.11a
• /
• pp.219-220
• /
• 2007

• Macromolecular Research
• /
• v.15 no.5
• /
• pp.465-468
• /
• 2007

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.10a
• /
• pp.188-189
• /
• 2009

AAO 템플레이트 기공 안에 기상 중합 방식을 이용하여 Poly(3,4-ethylenedioxythiophene) 전도성 나노 튜브를 제조하였다. PEDOT 나노튜브는 나노 단위의 직경과 마이크로 단위의 길이로 조절이 자유로우며 잘 정렬된 구조를 갖는다. PEDOT 나노 튜브의 전도도는 2000 S/cm로써 박막으로 제조된 것에 비해 향상되었으며, XPS, TEM, SEM와 SPM을 통해 형태 및 특성을 확인하였다.

• Polymer(Korea)
• /
• v.38 no.4
• /
• pp.525-529
• /
• 2014

PEDOT-$TiO_2$ hybrid conductive thin film including semiconductive metal oxide was successfully prepared via simultaneous vapor phase polymerization (VPP). The mechanical properties such as pencil hardness and anti-scratch property as well as optoelectrical properties of PEDOT-$TiO_2$ hybrid thin film could be improved as compared with pristine PEDOT thin film. Physicochemically stable crosslinked $TiO_2$ layer derived from a sol-gel process by FTS was generated in the PEDOT thin film layer by simultaneous VPP, resulting in improving mechanical properties of the hybrid thin films without any deterioration of their original optoelectrical properties. PEDOT-$TiO_2$ hybrid thin film showed better electrical conductivity as compared with PEDOT film. It might be due to the fact that the surface morphology of hybrid thin film prepared by simultaneous VPP showed smoother than that of pristine PEDOT thin film.

• Transactions on Electrical and Electronic Materials
• /
• v.6 no.1
• /
• pp.25-28
• /
• 2005

We have investigated the effects of hole-injection buffer layer in organic light-emitting diodes using poly(3,4-ethylenedioxythiophene):poly(stylenesulfonate)(PEDOT:PSS) in a device structure of $ITO/PEDOT:PSS/TPD/Alq_{3}/cathode$. Polymer PEDOT:PSS buffer layer was made by spin casting method. Current-voltage, luminance-voltage characteristics and efficiency of device were measured at room temperature with a variation of cathode materials; Al, LiF/Al, LiAl, and Ca/Al. The device with LiF/Al cathode shows an improvement of external quantum efficiency approximately by a factor of ten compared to that of Al cathode only device. Our observation shows that cathode is important in improving the efficiency of the organic light-emitting diodes.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2006.10a
• /
• pp.154-157
• /
• 2006

ITO(indium tin oxide)/glass 기판 위에 PEDOT:PSS[poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate)]와 PVK[poly(N-vinyl carbazole)] 고분자 물질을 정공 주입 및 수송층으로, 발광층으로 PFO-poss[Poly(9,9-dioctylfluorenyl-2,7-diyl) end capped with POSS]를 사용하여 스핀코팅법과 열 증착법으로 ITO/PEDOT:PSS/PVK/PFO-poss/LiF/Al 구조의 고분자 발광 다이오드를 제작하였다. PFO-poss 유기발광 층의 열처리 조건 (온도, 시간)이 PLED 소자의 전기적, 광학적 특성에 미치는 영향을 조사하였다. 1 wt%의 농도를 갖는 PFO-poss 유기물 발광 층을 200C 온도로 3시간 열처리 할 경우 11 V 인가전압에서 $1497\;cd/m^2$의 최대 휘도를 나타내었다. 동일온도에서 열처리 시간을 1시간에서 3시간으로 증가시킬 경우 휘도의 증가와 함께 발광 개시온도가 감소하는 경향을 보여주었다. 또한 열처리 온도와 시간을 증가시킬 경우 제2발광피크인 excimer 피크가 크게 나타났으며 청색에서 황색 발광 쪽으로 천이되는 경향을 나타내었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.968-971
• /
• 2002

Hole injection characteristics have been investigated with various metal anodes such as Ni, Pt, Cu, and AI for the top emission polymer light emitting diodes (PLEDs). Devices were composed of metal anode, Poly(3,4-ethylenedioxythiophene) doped with polystyrene sultponated acid (PEDT:PSS), poly [2-methoxy-5-(2-ethylhexyoxy)-1,4-phenylene-vinylene] (MEH-PPV) and Al cathode. The hole injection from ITO anode has been also investigated for the comparison. The I-V characteristics of the PLEDs with different metal anodes were measured. The work function of the anode is strongly related to the hole injection of the device. The current density of the device with Ni anode with higher work function was higher than that of the device with ITO or AI anode at the same operating voltage.

• Journal of Information Display
• /
• v.12 no.4
• /
• pp.213-217
• /
• 2011

Printing technologies were applied to fabricate a flexible organic thin-film transistor (OTFT) backplane for electrophoretic displays (EPDs). Various printing processes were adopted to maximize the figures of each layer of OTFT: screen printing combined with reverse offset printing for the gate electrodes and scan bus lines with Ag ink, inkjet for the source/drain electrodes with glycerol-doped Poly (3,4-ethylenedioxythiophene): Poly (styrenesulfonate) (PEDOT:PSS), inkjet for the semiconductor layer with Triisopropylsilylethynyl (TIPS)-pentacene, and screen printing for the pixel electrodes with Ag paste. A mobility of $0.44cm^2/V$ s was obtained, with an average standard deviation of 20%, from the 36 OTFTs taken from different backplane locations, which indicates high uniformity. An EPD laminated on an OTFT backplane with $190{\times}152$ pixels on an 8-in panel was successfully operated by displaying some patterns.

• Journal of Industrial and Engineering Chemistry
• /
• v.68
• /
• pp.293-300
• /
• 2018

Reduced graphene oxide (rGO) nanosheets were patterned with poly[benzodithiophene-bis(decyltetradecyl-thien) naphthothiadiazole] (PBDT-DTNT) and poly[bis(triiso-propylsilylethynyl) benzodithiophene-bis(decyltetradecyl-thien) naphthobisthiadiazole] (PBDT-TIPS-DTNT-DT) and used in photovoltaics. Conductive patternings changed via surface modification of rGO; because polymers encountered a high hindrance while assembling onto grafted rGO. The best records were detected in indium tin oxide (ITO):poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS):PBDTDTNT/rGO:PBDT-DTNT:LiF:Al devices, i.e., short current density $(J_{sc})=11.18mA/cm^2$, open circuit voltage $(V_{oc})=0.67V$, fill factor (FF) = 62% and power conversion efficiency (PCE) = 4.64%. PCE increased 2.31 folds after incorporation of PBDT-DTNT into thin films. Larger polymer assemblies on bared-rGO nanosheets resulted in greater phase separations.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.446-446
• /
• 2013

유기태양전지는 가벼운 무게와 우수한 유연성을 가져 플렉서블 태양전지 및 롤투롤(Roll-to-roll) 인쇄 공정에 대한 적용 가능성 때문에 많은 연구가 이루어지고 있다. 하지만 이종접합 유기태양전지를 상용화하기 위해서는 낮은 전력 변환 효율 (PCE)을 증진하는 연구가 필요하다. 본 연구에서는 간단한 용액공정을 통해 poly (3-hexylthiophene) (P3HT) 나노구조층을 사용하여 indium-tin-oxide 양극 전극/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) 정공수송층/P3HT 나노구조층/P3HT 복합체로 제작한 나노구조층/C60 전자수송층 /lithium quinolate 전자주입층/Al 음극 전극 구조의 유기태양전지를 제작하였다. 전류밀도-전압 곡선 결과는 P3HT 복합체 이용한 나노구조층를 가진 유기태양전지의 구조는 평면층을 가진 유기태양전지에 비해서 PCE가 향상됨이 관찰되었다. 유기태양전지는 짧은 엑시톤의 확산거리가 PCE 감소의 주요 원인이 된다. P3HT 복합체를 사용한 나노구조층을 가지는 유기태양전지는 광활성층과 전자수송층 사이의 계면이 넓어지는 효과를 가진다. 계면이 넓어지는 효과를 통해 생성된 엑시톤을 효율적으로 분리할 뿐만 아니라 더 많은 양의 전하를 생성할 수 있기 때문에 전하의 양이 증가되고 더 높은 전류를 생성하여 PCE를 효과적으로 높일 수 있다.