• Proceedings of the KIEE Conference
• /
• 2007.11a
• /
• pp.98-99
• /
• 2007

This study has successfully demonstrated the direct fabrication of polymer resistors using ink-jet printing technology as an alternative patterning to traditional photolithography. The polymer resistors were fabricated just by two layer processes using a ink-jet printer (DMP-2800, Fujifilm Dimatix). First, resistive materials was patterned by a ink-jet printing with the desired width and length. Next, resistor fabrication was completed by printing metal contact pads on the both sides of the polymer resistor. We used poly (3,4-ethylene dioxythiophene) poly(styrenesulfonate)(PEDOT:PSS) for the resistor material and a nano-sized silver colloid for the metal contact pads. We characterized the electrical properties of PEDOT:PSS by measuring sheet resistance and specific resistance on a glass substrate. From analysis of the measured resistances, the electrical resistances of the polymer resistors linearly increased as a function of printed width and length of resistors. The accuracy of the fabricated polymer resistor showed about $0.6{\sim}2.5%$ error for the same dimensions.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.127.2-127.2
• /
• 2013

오늘날 유기고분자기반 태양전지는 다른 태양전지와 비교될 정도로 낮은 광변환효율로 인해 효율향 상을 위한 많은 연구들이 진행되어 왔다. 그중 패터닝을 통한 광포집률과 charge carrier 수집효율이 증가되었다는 많은 보고들이 있었다. 따라서 우리는 200~1,400 nm polystyrene bead를 합성하여 air-liquid interfacial 방법을 이용해 2차원 육방조밀구조를 갖는 template를 형성하고 Nanosphere lithography (NSL)를 이용하여 대면적으로 균일한 poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS)를 패턴화하였다. 균일한 패턴형성을 측정하기위해 Field Emission Scanning Electron Microscopy (FE-SEM), image를 얻었으며, Atomic Force Microscopy (AFM)를 통해 형성된 패턴의 낙차 높이를 얻었고, Near IR-UV-Vis을 통해 bead size 변화에따라 얻어진 PEDOT:PSS 패턴의 반사율을 측 정하였다.

• Bulletin of the Korean Chemical Society
• /
• v.6 no.3
• /
• pp.145-148
• /
• 1985

The effect of anionic polyelectrolytes, poly(styrenesulfonate) (PSS) and poly(vinylsulfonate) (PVS), on the charge transfer complexing between indole derivatives and methyl viologen($MV^{++}$) cation was investigated. The results were compared with effect of NaCl and an anionic surfactant, sodium dodecylsulfate (SDS). Both PSS and PVS enhanced the complex formation of neutral species (indole and indole acetate at low pH), zwitter ionic tryptophan, and positively charged tryptamine and tryptophan at low pH with $MV^{++}$. This result was attributed to the contribution of hydrophobic interaction, in addition to electrostatic interaction. The enhancing effect of PSS was much higher than that of PVS reflecting the higher hydrophobicity of PSS. The interaction between indole acetate anion and $MV^{++}$ was greatly reduced by addition of PVS and PSS. The higher charge density of PVS was appeared as greater reducing effect indicating the importance of electrostatic force in this case. In all cases, the effect of polyelectrolytes showed maxima, and further addition of PVS and PSS decreased the effect. This behavior was explained in terms of distribution of indole derivatives and $MV^{++}$ in domain of polyanions. The complex formation constants and molar absorptivities of complexes were determined, and the values were compared with those in water and SDS solutions.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.3
• /
• pp.51-56
• /
• 2021

Using an inkjet printing process, we have investigated a droplet formation of poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS) near the orifice of a piezoelectric inkjet head. With an attempt to form the smallest droplet without any satellites, we have applied various waveforms such as the unipolar, bipolar, and M-shaped waveforms. It is found that the droplet velocity and volume vary depending sensitively on the waveform width and voltage. Of those, the M-shaped waveform is shown to provide the smallest droplet volume, followed by the bipolar and then unipolar waveforms. The droplet printed on a PET film roll by the M-shaped waveform has the diameter as small as 46.1 ㎛. It is likely that the second short unipolar in the M-shape waveform increases the droplet velocity gradient, rendering the droplet smaller.

• Bulletin of the Korean Chemical Society
• /
• v.10 no.4
• /
• pp.339-343
• /
• 1989

The interaction of cationic surfactants, n-alkyltrimethylammonium bromide ($C_nTAB$; n = 12, 14, 16) with anionic polyelectrolyte, poly(styrenesulfonate) (PSS) has been studied by surface tension measurement. In the absence of added salt, the cationic surfactants bind to PSS quantitatively up to ca. 60% coverage of anionic sites of the polyanion and the complexes were surface inactive. Further binding of the surfactant cations on PSS caused a sharp conformational transition of the surfactant/ PSS complexes to surface active complexes and accompanied precipitation. The binding showed a biphasic behavior in the presence of NaCl and cooperativity of the binding became less as the concentration of NaCl increased. Binding of the cationic surfactants on poly(vinylsulfonate) also showed the biphasic behavior and the cooperativity of the binding was much less even in the absence of NaCl. The binding of surfactant to PSS provided hydrophobic environment to solubilized pyrene and reduced the viscosity of the solution greatly even at surfactant concentrations well below cmc. This study indicated that the surfactant bound to PSS up to $60{\%}$ coverage of PSS sites are present as surfactant aggregates which are wrapped up with PSS chains, and hydrophobic interaction is an important factor in the binding of the surfactants to PSS.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.34 no.2
• /
• pp.115-120
• /
• 2021

In this study, composite transparent electrodes were fabricated either from a conductive polymer poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) or silver nanowire (AgNW). Three transparent electrodes such as PEDOT:PSS, PEDOT:PSS and AgNW mixture, and AgNW were fabricated. As for a transparent electrode, measured sheet resistance values were 89.6, 60.6 and 28.6 Ω/sq, and the transmittance values were 80.2, 82.0 and 83.8% while surface roughness (Rq) values were 4.1, 8.1, 20.4 nm for PEDOT:PSS, PEDOT:PSS and AgNW mixture, and AgNW, respectively. To verify the overall performance of these composite electrodes, we applied these electrodes to the top electrode of the solution-processed organic solar cells (OSCs). PEDOT:PSS provided the best performance with a fill factor (FF) of 51.2% and a photoconversion efficiency (PCE) of 2.2%, while traditional metal top electrode OSC provided FF of 60.5% and PCE of 3.1%.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.4
• /
• pp.39-44
• /
• 2022

Using a CFD (computational fluid dynamics) simulation tool, we have offered a design guideline of a slot-die head having a simple T-shaped cavity through an analysis of the fluid dynamics in terms of cavity pressure and outlet velocity, which affect the uniformity of coated thin films. We have visualized the fluid flow with a transparent slot-die head where poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS) is injected. We have shown that the fluid dynamics inside the slot-die head depends sensitively on the cavity depth, cavity length, land length, and channel gap (i.e., shim thickness). Of those, the channel gap is the most critical parameter that determines the uniformity of the pressure and velocity distributions. A pressure drop inside the cavity is shown to be reduced with decreasing shim thickness. To quantify it, we have also calculated the coefficient of variation (CV). In accordance with Hagen-Poiseuille's laws and electron-hydraulic analogy, the CV value is decreased with increasing cavity depth, cavity length, and land length.

• Korean Chemical Engineering Research
• /
• v.40 no.6
• /
• pp.729-734
• /
• 2002

In this study, the polyaniline films of emeraldine base(EB) and lucoemeraldine base(LEB) form chemically doping with poly(sodium-4 styrenesulfonate, PSS) were prepared by casting the mixed solution of chloroform and m-cresol on ITO(indium tin oxide) electrode. By analyzing UV-vis spectra of the mixed solutions, the effects of the secondary doping by m-cresol were obtained. And the conductivity of polyaniline film was increased with increasing m-cresol content. The results suggest that the improvement of conductivity obtained by secondary doping results primarily from interaction of polyaniline and m-cresol. As the results of analyzing cyclic voltammograms, it was known that the redox peak currents of polyaniline electrode prepared from LEB were larger and more reversible than those of polyaniline electrodes prepared from EB. The charge transfer resistances($R_{ct}$) of polyaniline electrodes were reduced with increasing m-cresol content, and LEB/PSS electrodes were smaller than EB/PSS electrodes. This result agrees to the analysis of the redox peak current of cyclic voltammograms. The solution resistance and the capacity of electrical double layer almost unchanged in all prepared polyaniline electrodes. It was confirmed that solution resistance was independent of frequency factor in AC impedance spectra. Also the polyaniline film doping with PSS was revealed pseudo n-type characteristics of conducting polymer.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.505-505
• /
• 2013

유기발광소자는 저전력, 고휘도 및 빠른 응답속도와 넓은 시야각 등의 장점을 가지고 있어 소형 디스플레이 및 대형 디스플레이로 상용화하기 위해 많은 연구가 진행되고 있다. 고분자 유기발광소자는 저분자 유기발광소자에 비하여 용액공정을 사용하여 저비용으로 대면적 디스플레이를 제작하기 유리하기 때문에 많은 연구가 되고 있다. 하지만, 고분자 유기발광 소자는 구동 전압이 높고 발광효율이 낮은 단점을 가지고 있다. 본 연구에서는 고분자 유기발광 소자의 구동전압 감소와 발광효율을 증가 시키기 위해 정공주입층을 가진 적색 고분자 유기발광소자를 제작하였다. 정공주입층을 포함하는 고분자 유기발광소자는 Indium thin oxide (ITO)위에 정공주입층 형성 후 스핀코팅 방법으로 poly (3,4-ethylenedioxythiopene): poly (styrenesulfonate) (PEDOT: PSS)을 정공수송층으로, poly (2-methoxy-5-(2-ethylhexoxy)-1,4-phenylence vinylene) (MEH-PPV)를 발광층으로 적층하고, Al을 음극 전극으로 진공 증착하여 소자를 제작하였다. 정공주입층의 특성 분석을 위해 정공주입층의 투과도와 ITO/PEDOT:PSS와 ITO/정공주입층/PEDOT:PSS의 표면을 원자힘 현미경으로 측정하였다. 정공주입층의 가시광선 영역 투과도는 90% 이상으로 높게 나왔으며, ITO/정공주입층/PEDOT:PSS의 경우 ITO/PEDOT:PSS 보다 표면 거칠기가 감소하였다. 높은 가시광선 영역 투과도와 낮은 표면 거칠기는 발광층으로 정공주입을 원활하게 하여 소자의 발광 효율이 증가한다. 정공주입층을 포함하는 적색 고분자 유기발광소자의 경우 전류밀도-전압, 휘도-전압의 관계에서 정공주입층을 사용하지 않은 소자에 비하여 높은 전기적 및 광학적 특성이 나타났다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.67-67
• /
• 2008

Application of organic materials with low cost, easy fabrication and advantages of flexible device are increasing attention by research work. Recently, one of them, organic solar cells were rapidly increased efficiency with regioregular poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl-C61-butyricacidmethylester (PCBM) used typical material. To increased efficiency of organic solar cell has tried control of domain of PCBM and crystallite of P3HT by thermal annealing and solvent vapor annealing. [4-6] In those annealing effects, be made inefficiently efficiency, which is increased fill factor (FF), and current density by phase-separated morphology with blended P3HT and PCBM. In addition, increased conductivity by modified hole transfer layer (HTL) such as Poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS), increased both optical and conducting effect by titanium oxide (TiOx), and changed cathode material for control work function were increased efficiency of Organic solar cell. In this study, we had described effect of organic photovoltaics by conductivity of interlayer such as PEDOT:PSS and TCO (Transparent conducting oxide) such as ITO, which is used P3HT and PCBM. And, we have measured with exactly defined shadow mask to study effect of solar cell efficiency according to conductivity of hole transfer layer.