• 한국환경과학회지
• /
• 제22권7호
• /
• pp.823-836
• /
• 2013

Emissions of air pollutants and greenhouse gases (GHGs) from aircraft activities at 11 small-scale airports were investigated using the emissions and dispersion modeling system (EDMS) version 5.1.3 during the two year period of 2009~2010. The number of landing and take-off (LTO) at these airports was dominant for the aircraft type B737, accounting for more than 60% of the total LTOs. Out of the 11 small-scale airports, Gwangju (GJ, RKJJ) airport was the largest emitter of air pollutants and GHGs, whereas Yangyang (YY, RKNY) airport was the smallest emitter. The emissions of $NO_x$ and VOCs in 2010 at the 11 airports ranged from 1.9 to 83 ton/y and 0.1 to 17 ton/y, respectively. In 2010, the emissions of $CO_2$ ranged from 394 to 21,217 ton/y. The emissions of most air pollutants (except for $NO_x$ and $PM_{10}$) and GHGs were estimated to be the highest in taxi-out mode. The highest emissions of $NO_x$ and $PM_{10}$ were emitted from climb-out and approach modes, respectively. In addition, the total LTOs at the 11 small-scale airports accounted for the range of 9.3~9.9% of those at four major international airports in Korea. The total emissions of air pollutants and GHGs at the 11 airports ranged from 4.8 to 12% of those at the four major airports.

• 해양환경안전학회지
• /
• 제27권6호
• /
• pp.721-730
• /
• 2021

본 연구에서는 국내 서로 다른 지리적 특성을 갖는 지역에서 발생되는 해륙풍에 의한 항만 내 선박 대기오염물질의 항구도시 확산 범위를 규명하고자 하였다. 연구 대상 지역은 서해안(인천항 및 평택·당진항), 다도해 지역(목포항), 남해 및 동해(부산항 및 마산항), 동해 산간 지역(동해·묵호항)으로 선정하였다. 해륙풍 발생과 그로 인한 항만 내 선박에서 기인하는 대기오염물질의 확산 모사를 위하여 비선형(Non-linear) 및 비정상(Unsteady) 거동의 국지 순환풍 모사가 가능한 HOTMAC-RAPTAD 프로그램을 활용하였으며, 모사 기간은 전형적인 여름 날씨인 7월 중순으로 하였다. 그 결과, 해륙풍의 발생 특성과 항만에서 발생되는 대기오염물질의 주변 지역 확산 거동이 지역마다 서로 다르게 나타났는데 연구 대상 항만인 인천항, 목포항, 부산항, 동해·묵호항에서 배출되는 대기오염물질은 항구로부터 각각 27~31km(서울 서쪽 일부 지역), 21~24km(무안 남부), 20~26km(김해 및 양산 인근), 22~25km(태백산맥 능선 지역)까지 영향을 끼치는 것으로 분석되었다. 따라서 본 연구에서 도출된 결과는 향후 효과적인 항만 지역 대기질과 선박 대기오염물질 관리에 있어 매우 중요한 기초 수단으로 활용 가능할 것으로 기대된다.

• 한국대기환경학회지
• /
• 제23권4호
• /
• pp.405-419
• /
• 2007

A series of tracer experiments for the evaluation of atmospheric dispersion was performed over the urban area of Seoul using two inert, non-deposition perfluorocarbon (PMCH and m-PDCH) gases during three years campaign on 2002, 2003 and 2005. 30 sampling sites for collecting these tracers were located along two arcs of 2.5 and 5 kilometers downwind from the release point. About ten measurements which each lasted for 2 hours or 4 hours were made over the two consecutive days during each campaign. CALPUFF and MM5 meteorological model were applied to evaluate the urban dispersion in detail. Size of Modeling domain was $27\;km{\times}23\;km$ and the fine nest in the modeling domain had a grid size of 0.5 km. The results showed that CALPUFF dispersion model had a tendency to estimate tracer concentrations about $2{\sim}5$ times less than those of ambient samples under many conditions. These consistent inaccuracy in urban dispersion was attributed to inherent inaccuracy and lack of details in terrain data at urban area.

• 한국환경과학회지
• /
• 제10권3호
• /
• pp.187-194
• /
• 2001

For the purpose of predicting air pollutants concentration in Pusan coastal urban, we used an Eulerian model of flow and dispersion/chemistry/deposition process considering SST effects which estimate through POM. The results of air quality model including emission from various sources show that the seasonal variation pattern of respective pollutants was affected by the seasonal SST fields and local circulation. Horizontal deviation of diurnal SST was 2.5~4K, especially large gradients in coastal region. Through numerical simulation of wind fields we predicted that local circulation prevailed during daytime in summer and nighttime in winter. So high concentration distribution showed toward inland in spring and summer seasons, while high concentration distribution showed at inland near coast in autumn and winter.

• 환경영향평가
• /
• 제14권5호
• /
• pp.291-303
• /
• 2005

Impact pathway analysis(IPA) is a bottom-up approach to estimates health and environmental risks from emissions of classical pollutants (eg. $PM_{10}$, $SO_2$, $NO_x$ and CO). The model starts from the emission rates of facility, calculates the yearly mean concentrations of pollutants at the ground level using atmospheric dispersion models. After this, proper epidemiological exposure-response functions are applied to determine the impact on the receptors. Finally the methodology can monetise the calculated physical impact on the basis of selected economic evaluation. The aim of this study is to evaluate an external cost of virtual point source in Suwon area using IPA. The results shows minor modification of local input data can make it possible to apply the model to Suwon area.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1993년도 춘계 총회 및 학술발표회
• /
• pp.25-27
• /
• 1993

Multiphase equilibrium-based processes for separation and purification generally utilize dispersed systems in which one phase is dispersed in the other as bubbles or drops or thin films. Using microporous membranes, novel techniques have been developed such that multiphase processes can now be carried out in a nondispersive fashion for gas-liquid (Sirkar, 1992) and liquid-liquid (Prasad and Sirkar, 1992) contacting processes. Among such processes, only nondispersive solvent extraction of pollutants using microporous membranes will be of concern here. These processes employ immobilized immiscible phase interfaces at the pore mouths in a microporous membrane. Through such interfaces, solutes are extracted into the solvent as two immiscible phases flow on two sides of a microporous membrane. Many advantages of such a technique over conventional dispersion-based extractors have been summarized (Prasad and Sirkar, 1992).

• 한국자동차공학회논문집
• /
• 제7권9호
• /
• pp.20-27
• /
• 1999

The proportion of diesel vehicle is very high in this country . PM and NOx emitted from diesel-posered vehicle is severely ;affecting to be air quality . Especially, diesel particulate matters(DPM) including black smoke are hazardous air pollutants to human health and environment. In order to reduce the exhaust emissions from diesel engines, it is necessary to analyze the characteristics of exhaust emissions from diesel engines in various driving conditions. Recently, there are occasion to increase the fuel consumption rate to engine power up. So, in this study we have tested a diesel engine detached from in use -diesel vehicle and analyzed exhaust emission by driving condition and fuel dispersion rate. From this results, we will prepare the comprehensive management plan for exhaust emissions from diesel vehicles and contribute to the improvement of air pollution in urban area.

• 한국환경과학회지
• /
• 제8권3호
• /
• pp.355-361
• /
• 1999

The aim of this study is to develop the water quality simulation model (BAYQUAL) that deal with the physical, chemical and biological aspects of fate/behavior of pollutants in the bay. BAYQUAL is a two dimensional, time-variable finite element water quality model based on the flow simulation model in bay(BAYFLOW). The algorithm is composed of a hydrodynamic module which solves the equations of motion and continuity, a pollutnat dispersion module which solves the dispersion-advection equation. The applicability and feasibility of the model are discussed by applications of the model to the Kwangyang bay of south coastal waters of Korea. Based on the field data, the BAYQUAL model was calibrated and verified. The results were in good agreement with measured value within relative error of 14% for COD, T-N, T-P. Numerical simulations of velocity components and tide amplitude(M2) were agreed closely with the actual data.

• 한국안전학회지
• /
• 제9권1호
• /
• pp.146-154
• /
• 1994

A series of numerical calculations are performed in order to investigate the dispersion mechanism of toxic gaseous and solid pollutants in extremely short-term and short range. The calculations are carried out in an open space characterized by turbulent boundary layer. The simulation is made by the use of numerical model, in which a control-volume based finite difference method is used together with the SIMPLEC algorithm for the resolution of the pressure-velocity coupling problem. The Reynolds stresses are solved by two-equation, k-$\varepsilon$ model modified for buoyancy. The major parameters consider-ed in this study are temperature, velocity and Injection height of toxic gases, environmental conditions such as temperature and velocity of free stream air, and topographic factor. The results are presented and discussed in detail. The flow field is commonly characterized by the formation of a strong recirculation zone due to the upward motion of the hot toxic gas and ground shear stress. The driving force of the upward motion is explained by the effect of thermal buoyancy of hot gas and the difference of inlet velocity between toxic gas and free stream.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.1060-1067
• /
• 2006

Sandy soils are generally used as a capping material to reduce the pollutants transport from the contaminated dredged sediment. However, dredged material capping is not widely used because regulatory agencies are concerned about the potential for contaminants migration through the cap. Movement of contaminated pore water from sediment into cap is mainly related to sediment consolidation during and after cap placement. To evaluate the significance of consolidation induced transport of contaminants from sediment into cap, research centrifuge tests were conducted. Centrifuge test results illustrate that advection and dispersion are the dominant contaminants transport processes and that capping reduces the potential of contaminant migration from the dredged sediment effectively.