• KIEAE Journal
• /
• 제7권5호
• /
• pp.53-58
• /
• 2007

In order to predict the indoor air pollutant, the VOCs emission rate is used through small chamber in the design process. However, the small chamber method has limitations as the convective mass transfer coefficient, the most important factor when predicting VOCs contamination of indoor air, is different between the small chamber result and the measured data in the actual building. Furthermore, the existing studies which analyzed mass transfer coefficient in the small chamber were directed on the small chambers developed at the time and FLEC(Field and Laboratory Emission Cell), thus, are different from the current small chamber which has been changed with improvements. The purpose of this study is to determine the emission rate of pollutant in multi-layered building materials, and predict the indoor pollutant concentration through the CFD(Computational of Fluid Dynamics) and CRIAQ2 based on the mass transfer coefficient on singled-layered building material by using the current small chamber widely used in Korea. Futhermore, this study used the new convective mass transfer coefficient(hm') which indicates the existing convective mass transfer coefficient(hm) including VOC partition coefficient(k). Also, formaldehyde was selected as target pollutant.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.277-282
• /
• 2006

In order to predict the indoor air pollutant, the VOCs emission rate is used through small chamber in the design process. However, the small chamber method has limitations as the convective mass transfer coefficient, the most important factor when predicting VOCs contamination of indoor air, is different between the small chamber result and the measured data in the actual building. Furthermore, the existing studies which analyzed mass transfer coefficient in the small chamber were directed on the small chambers developed at the time and FLEC(Field and Laboratory Emission Cell), thus, are different from the current small chamber which has been changed with improvements. The purpose of this study is to determine the emission rate of pollutant in double-layered building materials through the CFD(Computational of Fluid Dynamics) and Numerical analysis based on the mass transfer coefficient on singled-layered building material by using the current small chamber widely used in Korea. Futhermore, this study used the new convective mass transfer coefficient($h_m'$) which indicates the existing convective mass transfer coefficient($h_m$) including VOC partition coefficient(k). Also, formaldehyde was selected as target pollutant.

• 한국환경과학회지
• /
• 제11권10호
• /
• pp.1125-1131
• /
• 2002

This study was performed to plan pollutant loading allocation by sub-watershed at Kumho river basin located in the north Kyeongsang province. HEC-geoHMS which is extension program of ArcView was used to extract sub-watershed. To simulate water quality, Qua12eu model was calibrated and validated. BOD was simulated under several scenarios to evaluate reduction effects of pollutant loading. Uniform treatment and transfer matrix method was considered. Effects of headwater flow rate and efficiency waste water treatment plant were also considered.

• 한국지반환경공학회 논문집
• /
• 제9권3호
• /
• pp.5-9
• /
• 2008

하수관거는 지중에 매설되기 때문에 균열발생 시 오염원이 빠르게 지하로 침투되어 오염을 야기한다. 본 연구에서는 하수관거 균열발생 시의 오염원의 확산에 대한 수치모델링을 수행하였다. 모델링 수행 결과를 이용하여 오염원의 이동경로를 예측해보았으며, 다음과 같은 결론을 얻었다. 오염원의 이동방향은 지표면의 지형경사에 따른 흐름과 비슷한 경향을 보이는 것으로 나타났으며, 지하방향으로는 약 8~10m 깊이까지 침투되는 것으로 나타났다. 본 연구를 통하여 장래 하수관거 관리에 효율성을 제공할 것으로 기대된다.

• 한국연소학회지
• /
• 제8권2호
• /
• pp.7-16
• /
• 2003

The transfer of air pollutants between passenger room and service room in train are investigated by the computational analysis. The effects of service room temperature, inlet velocity, initial concentration and heating are studied. The flow induced by the difference of density between two rooms is found to take the major role in transfer of polluted air. Low temperature of service room enhances the polluted air flow into passenger room along the floor. Exhaust fan above the door between two rooms is not effective for this case. Strong inlet flow is found to suppress polluted air flow from service room. The heating of passenger room can promote air pollution.

• 환경위생공학
• /
• 제23권3호
• /
• pp.47-57
• /
• 2008

This study was predicted the diffusion of the conservative contaminant using a two-dimensional hydraulic model. The research area is upper basin of Jakwang river where the possibility where the pollutant of vast quantity will flow is high. Using SMS model, we calculated two-dimensional stream flow. And using this result, predicted the conduct of the conservative contaminant by pollutant transfer diffusion calculation. And also we predicted flow and contaminant diffusion in the near estuary by constructed guide bank. As a result of study, pollutant effect scope of the conservative contaminant was predicted with the fact that will broaden because of interception by guide bank. As discharge was increased from the Jakwang river, The diffusion of the pollutant is accelerated, also the effect scope increases.

• 한국환경보건학회지
• /
• 제48권5호
• /
• pp.272-281
• /
• 2022

Background: The constant consumption of chemical products owing to expanding industrialization has led to an increase in public interest in chemical substances. As the production and disposal processes for these chemical products cause environmental problems, regional information on the hazard level of chemical substances is required considering their effects on humans and in order to ensure environmental safety. Objectives: This study aimed to identify hazard contribution and spatiotemporal characteristics by region and chemical by calculating a hazard-based result score using pollutant release and transfer register (PRTR) data. Methods: This study calculated the chemical discharge and hazard-based result score from the Risk-Screening Environmental Indicators (RSEI) model, analyzed their spatiotemporal patterns, and identified hotspot areas where chemical discharges and high hazard-based scores were concentrated. The amount of chemical discharge and hazard-based risk scores for 250 cities and counties across South Korea were calculated using PRTR data from 2011 to 2018. Results: The chemical discharge (high densities in Incheon, Daegu, and Busan) and hazard-based result scores (high densities in Incheon, Chungcheongnam-do, and some areas of Gyeongsangnam-do Province) showed varying spatial patterns. The chemical discharge (A, B) and hazard-based result score (C, D) hotspots were identified. Additionally, identification of the hazard-based result scores revealed differences in the type of chemicals contributing to the discharge. Ethylbenzene accounted for ≥80% of the discharged chemicals in the discharge hotspots, while chromium accounted for >90% of the discharged chemicals in the hazard-based result score hotspots. Conclusions: The RSEI hazard-based result score is a quantitative indicator that considers the degree of impact on human health as a toxicity-weighted value. It can be used for the management of industries discharging chemical substances as well as local environmental health management.

• Nano
• /
• 제13권11호
• /
• pp.1850127.1-1850127.13
• /
• 2018

Bi metal deposited on $Bi_2MoO_6$ composite photocatalysts have been successfully synthesized via a simple reduction method at room temperature with using $NaBH_4$ as the reducing agent. The photocatalytic activity of the composite was evaluated by degradation of rhodamine B (RhB) and bisphenol A (BPA) solution under visible light. The rate constant of $Bi/Bi_2MoO_6$ composite to RhB is 10.8 times that of $Bi_2MoO_6$, and the degradation rate constant of BPA is 6.9 times of that of $Bi_2MoO_6$. Nitrogen absorption-desorption isotherm proved that the increase of specific surface area is one of the reasons for the improvement of photocatalytic degradation activity of $Bi/Bi_2MoO_6$ composites. The higher charge transfer efficiency of $Bi/Bi_2MoO_6$ is found through the characterization of the photocurrent and impedance, which are attributed to the surface plasmon resonance (SPR) effect produced by the introduction of the metal Bi monomer in the composite. Free radical capture experiments proved that cavitation is the main active species. Based on the above conclusions, a possible mechanism of photocatalytic degradation is proposed.

• 한국환경보건학회지
• /
• 제47권2호
• /
• pp.144-154
• /
• 2021

Objectives: This study was intended to identify hazard contribution by region, media, and chemical by calculating a hazard-based index using pollutant release and transfer register (PRTR) data. Methods: PRTR data for the period 2011 to 2016 was analyzed to examine the regional trends in toxic releases in terms of quantity and to create a corresponding hazard-based index. For the hazard-based index, the Risk-Screening Environmental Indicators (RSEI) Model was used. Results: The results of the trend analysis show that total releases decreased slightly, but health hazard levels increased consistently. According to the outcome of regional contribution analysis of the hazard-based index, Chungcheongnam-do, Jeollabuk-do and Gyeonggi-do Provinces showed a high ratio in the index for air and water release pollutants, while Gyeongsangbuk-do and Gyeongsangnam-do Provinces showed a high ratio in the index of soil release and waste transfer pollutants. Also, as a result of the analysis of the top ranked substances in the hazard-based index, it was found that chromium, cobalt and its compounds, and ethylene oxide contributed greatly to air release substances, while chromium, benzene, and lead and its compounds contributed greatly to water release substances. Conclusion: These results showed considerable disparities between total release and health hazard levels, especially in the analysis of contribution by regions and by chemical substance. Therefore, the hazard-based index should be used both to support a more comprehensive and robust approach to screening of chemicals for environmental health policy and for management.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2001년도 제22회 KOSCI SYMPOSIUM 논문집
• /
• pp.172-179
• /
• 2001

Experimental studies have been carried out to find out the characteristics of the heat transfer, combustion emission and noise in the boilers without any extra firing zone for complete combustion of fuel. For the experiments a burner of premixed type and some heat exchangers were designed and manufactured. Also test facilities including a data acquisition system and various measuring devices were set up in order to measure automatically the various temperatures and flow rates of water and combustion gas. Various experiments were performed to find out the heat transfer characteristics as well as combustion emission and noise. In general, the burner which has uniform holes in the burner nozzle plate generates big combustion noise . whistling. The noise reduction method is discussed in this study. Many experimental data such as noise level, the amount of pollutant emission and heat transfer rate for different combination of heat exchangers are given as comparison bases for numerical studies.