• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2225-2227
• /
• 2001

A wireless communication module for multiple nearfiled measurement and control module was developed. The function of the developed system are dual communication, concurrent multiple communication, PLC control, and A/D, D/A converting. The multiple communication approach is based on master-slave with sub-polling scanning concept.

• Journal of Digital Contents Society
• /
• v.8 no.4
• /
• pp.483-489
• /
• 2007

The high availability of information security system shall be primarily studied in relation to the Next Generation Network(NGN) Information Security infrastructure, because it is very important to maintain availability at each moment as a variety of intrusions occur continuously. The high availability of the security system can be realized with the topology and configuration properly defined to fully utilize the recovery function of the security system in the thoroughly planned optimized method. The active-active high availability on the NGN information security infrastructure system in is assured by letting the failover mechanism operate upon the entire structure through the structural design and the implementation of functions. The proposed method reduces the system overload rating due to trouble packets and improves the status of connection by SNMP polling trap and the ICMP transport factor by ping packet.

• Journal of the Korea Society for Simulation
• /
• v.17 no.4
• /
• pp.199-208
• /
• 2008

Lately, since Complementary Metal Oxide Semiconductor(CMOS) image sensor system has low power, low cost and been miniaturized, hardware and applied software studies using these strengths are being carrying on actively. However, the products equipped with CMOS image sensor based polling method yet has several problems in degree of completeness of applied software and firmware, compared with hardware’s. CMOS image sensor system has an ineffective synchronous problem due to superfluous message exchange. Also when a sending of data is delayed continually, overhead of re-sending is large. So because of these, it has a problem in structural stability according to Polling Method. In this study, polling cycle was subdivided in high-speed synchronization method of firmware -based through MCU and synchronization method of Stepwise was proposed. Also, re-connection and data sending were advanced more efficiently by using interrupt way. In conclusion, the proposed method showed more than 20 times better performance in synchronization time and error connection. Also, a board was created by using C328R board of CMOS image sensor-based and ATmega128L which has low power, MCU and camera modules of proposed firmware were compared with provided software and analyzed in synchronization time and error connection.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.6
• /
• pp.894-900
• /
• 1998

In this paper, a communication method is proposed for the development of a main engine remote control system. The main engine control system compriese three subsystems such as RCS (Remote Control System) BCS (Bridge Control System) and SS (Safety System), Thus it is required to exchange data each other among these subsystems. The communication method has simplified hardware through the minimization of communication components where the interrupt method are employed for receiving and the polling method for transmitting. We discuss a methodology of using a ring buffer for data storage physically which has two buffers virtually for the effective use of memory. This communication method presents a good performance in the system which has rather small numbers of communication data.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2000.11a
• /
• pp.413-418
• /
• 2000

For Pneumatic system control, we need a data transmission system with high speed and high realibility for information interchange between main computer and solenoid valves and I/O devices. This paper presents a set of design techniques for a data communication system that is mainly used for pneumatic system control. For this purpose, we first designed hardware modules for an interface between central control module and local node that handles the operation of solenoid valves. In addition we developed a communication protocol for construction of RS-485 based multidrop network, and this protocol is basically designed with a kind of polling technique. Finally we evaluated performance of the developed system. The field test results show that, even under high noise environment, the data transmission of 375Kbps rate is possible up to 1,000m without using repeater. In addition, the system developed in this research is proved to be used easily for extension of a communication network because of its module structure.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.2
• /
• pp.455-463
• /
• 1999

This study is on the development of an engine monitoring system which can be applied not only for mid-size vessels but also small vessels less than 20 gross tonnage. Monitoring system consists of a set LMU(Local Monitoring Unit) that collect data from local machinery, a host computer that controls LMU and a stable communication system which adopts CSMA/CD protocol. The LMU is composed of 80C196KC microprocessor, which consists of CPU, digital input/output, analog input/output and communication module. Communication system between the host computer(compatible IBM PC) and LMUs is the multidrop configuration using RS-485 method and confirmed high performance communication by the aid of polling method as well as carrier sense multiple access with collision detection(CSMA/CD) protocol.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.150.2-150
• /
• 2001

For pneumatic system control, we need a data transmission system with high speed and reliability for information interchange between main computer and I/O devices. This paper presents a set of design techniques for a data communication system that is mainly used for pneumatic system control. For this purpose, we first designed hardware modules for an interface between central control module and local node that handles the operation of solenoid valves. In addition, we developed a communication protocol for construction of RS-485 based multi-drop network, and this protocol is basically designed with a kind of polling technique. Finally we evaluated performance of the developed system. The field test results show that, even under high noise environment, the data transmission of 375Kbps rate is ...

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.3
• /
• pp.710-721
• /
• 1999

In this paper, we have designed and implemented a parameter extraction system for analyzing Internet using SNMP. The extraction system has two modules; one is collection request module, and the other is analysis request module. The collection request module generates a polling script, which is used to collect management information from the managed system periodically. With this collected data, analysis request module extracts analysis parameters. These parameters are traffic flow analysis, interface traffic analysis, packet traffic analysis, and management traffic analysis parameter. For management activity, we have introduced two-step-analysis-view. One is Summary-View, which is used find out malfunction of a system among the entire managed systems. The Other is Specific-View. With this view we can analyze the specific system with all our analysis parameters. To show available data as indicators for line capacity planning, network redesigning decision making of performance upgrade for a network device and things like that.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.519-523
• /
• 2003

This paper describes the communication system of sequencing sorter. Generally sequencing sorter is a machine that sorts mails by delivery order. And designed sequencing sorter is composed of 5 physical modules. So, it is necessary to communicate with each module and to control this communication. A computer called Machine Management Computer, controls this. This paper is about the communication system with MMC and module controllers. This is PC-based, asynchronous full-duplex 4-wire serial systems. 3 protocol layers are presented and stop-and-wait flow control is adopted. Because designed sequencing sorter has to be operated high speed about 27,000 letters per hour, we analyzed the network traffic in the worst case. So, we could find that the communication system has to use above 115,200bps speed.

• 한국디지털정책학회:학술대회논문집
• /
• 2004.11a
• /
• pp.311-331
• /
• 2004

This paper addresses the democracy-oriented regulatory and legal requirements that e-democracy impacts. It demonstrates that the structure of the political system also plays a significant role in the decision to develop an e-voting application. The short term perspective of the questions put before the electorate obliterate the long term perspective in which many policy problems have to be seen. A well-designed e-voting system should produce an audit trail that is even stronger than that of conventional systems (including paper-based systems). Remote Internet voting systems pose significant risk to the integrity of the voting process, and should not be fielded for use in public elections until substantial technical and social science issues are addressed. Conclusively the paper focuses on the specific attributes an electronic voting (polling place) system should respect and ensure such as transparency, verifiability, accountability, security and accuracy in relation to the constitutional requirements such as General, Free. Equal, Secret, Direct and Democratic.