• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.326-329
• /
• 1999

In this paper, we demonstrate a polarization independent optical phase modulator using electro-optic polymer, P2ANS. To overcome the intrinsic polarization dependency of electro-optic effect, we control the optic axis using a new electrode structure. P2ANS(42:75) and P2ANS(25:75) are used for the core layer and the cladding layer, respectively. The buried-type single mode waveguide is fabricated by oxygen ion reactive etching and electic poling is performed by applying 1, 200V at 135$^{\circ}C$. The measured V$_{\pi}$ of the device for both TE and TM modes are 70V.

• Korean Journal of Optics and Photonics
• /
• v.23 no.6
• /
• pp.264-268
• /
• 2012

In this paper, we propose a new method for broadcasting in a WDM-PON system which has the merits of a simple and cost effective structure. It can be constructed using only an ASE (Amplified Spontaneous Emission) light source and a PI-RSOA (Polarization Independent - Reflective Semiconductor Optical Amplifier). Error-free broadcast signal transmission over 30 Km for 24 channels at 1.25 Gb/s has been successfully demonstrated.

• Korean Journal of Optics and Photonics
• /
• v.15 no.6
• /
• pp.503-510
• /
• 2004

We propose a novel vertical directional coupler switch using a vertical directional coupler with polarization independent coupling lengths employing the doublesided deep-ridge waveguide structure. This switch is composed of a switching operation induced section with symmetric structures and an extinction ratio enhanced section with asymmetric structures. We present design methods and examples for this switch with very short lengths and very high extinction ratios larger than 30 dB for both TE and TM modes in cases of both cross and bar states.

• Aerospace Engineering and Technology
• /
• v.6 no.2
• /
• pp.211-218
• /
• 2007

Dual-polarization means to use two orthogonal polarizations, namely two independent channels in communication. This can be used to deal with high datarate caused by large amount of observed data in future LEO satellite. However, when two orthogonal polarizations are not perfectly independent to each other in practical, interference is probably raised in each channel, meaning that noise level in passband increases. XPD (Cross-Polarization Discrimination) is the ratio of the signal level at the output of a receiving antenna that is nominally co-polarized to the transmitting antenna to the output of a receiving antenna of the same gain but nominally orthogonal polarized to the transmitting antenna. In this paper, the influence of XPD on the communication between satellite and ground station was analyzed under the assumption that X-Band dual-polarization was applied to KOMPSAT-2 (KOrea Multi-Purpose SATellite-2). Through analysis, it was shown that more than 3dB of link margin was still achievable despite of worst axial ratio, 2.5dB, at ground station antenna when axial ratio of satellite antenna was about 0.5dB under 99% of environmental availability.

• ETRI Journal
• /
• v.27 no.3
• /
• pp.250-256
• /
• 2005

A novel planar polarization-agile microstrip subarray is proposed and its performance assessed by a thorough numerical investigation. The subarray consists of five square patches with a central element, directly coupled to a pair of microstrip feed lines by a cross-shaped aperture, which spreads the power outwards to the other patches through a network of suitable connections. By properly exciting the antenna at its input ports, any kind of polarization of the radiated field can be accomplished with fairly low cross-polarization levels. Moreover, since only two feed lines are required to drive the whole subarray, polarization agility is simply and attractively achieved by a single phase-shift circuit. The design concept is described and the results of the analyses and simulations performed by two completely independent full-wave approaches are presented and discussed.

• The Bulletin of The Korean Astronomical Society
• /
• v.45 no.1
• /
• pp.57.2-57.2
• /
• 2020

We observed the Class I protostar TMC-1A in polarized dust emission at 1.3 mm at a spatial resolution of ~40 au using ALMA. Previous observations revealed a disk (r~100 au), surrounded by an infalling envelope, and a CO outflow going in the north-south direction in TMC-1A. Our observations detected polarized dust emission in a central region (r~50 au) and ~100 au north and south of the central protostar. The former polarization is likely due to self-scattering because of the polarization direction along the disk minor axis, the polarization fraction independent of Stokes I, and a high optical thickness. The latter polarization is roughly in the outflow region. The position and direction, particularly in the north, imply multiple possible mechanisms: magnetically or mechanically aligned dust grains in the outflow or in an accretion flow.

• Korean Journal of Optics and Photonics
• /
• v.15 no.1
• /
• pp.12-16
• /
• 2004

We show that the extinction ratio is improved using slight asymmetry in two core refractive indices of polarization independent very short vertical directional couplers with the double-sided deep-ridge (DSDR) waveguide structure. The optimum asymmetry with the maximum extinction ratio and the tolerance of the refractive index of core with the extinction ratio larger 1ha]1 30 ㏈ increase as the thickness of inner cladding layer and the two cores decrease due to the increase of the coupling strength between the two cores. Also, the device length and the tolerance of the device length with the extinction ratio larger than 30 ㏈ decrease as the thickness of the inner cladding layer and the two cores decrease due to the increase of the coupling strength between the two cores. We show that polarization independent vertical directional couplers with the DSDR waveguide structure with the device length less than 100 ${\mu}{\textrm}{m}$ and the extinction ratio larger than 30 ㏈ could be implemented.

• Korean Journal of Optics and Photonics
• /
• v.16 no.3
• /
• pp.261-265
• /
• 2005

The large and polarization-independent photonic bandgap (PBG) is very useful to the application to various optical devices. Until present, it has been known that the PBG for a triangular lattice remains the largest both in the E- and H-polarized modes. However, we proposed a new structure with a larger polarization-independent PBG, by analyzing and systemizing the PBG opening trends as the structural changes. This optimal structure for maximum bandgap has more increased gap-midgap ratio $(\Delta\omega/\omega)$ of about $30\%$ than the triangular lattice.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.784-787
• /
• 2006

Dual-polarized transmission is one of the effective methods to transmit such a high speed data thanks to two independent channel leads to the orthogonal feature between RHCP (Right-Hand Circular Polarization) and LHCP (Left-Hand Circular Polarization). However, in practical case, the transmitted signal by RHCP polarized antenna in satellite can be occurred at the output port of LHCP polarized antenna in ground station, vice versa. XPD (Cross-Polarization Discrimination) is the ratio of the signal level at the output of a receiving antenna that is nominally co-polarized to the transmitting antenna to the output of a receiving antenna of the same gain but nominally orthogonally polarized to the transmitting antenna. In this paper, the detailed estimation of XPD within the interface between satellite and ground station is written and the influence of XPD to link performance is also described.

• Korean Journal of Optics and Photonics
• /
• v.16 no.2
• /
• pp.138-142
• /
• 2005

In this paper, a method to eliminate the polarization dependent properties of fiber-to-planar waveguide couplers using a thin half-waveplate is proposed and demonstrated. The operation principle of the device is explained and the fabrication technology is presented. It is experimentally shown that the resonance wavelengths of the device are independent of the polarization state of input light.