• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.7
• /
• pp.881-888
• /
• 1999

Target pointing guidance steers a vehicle to point at a target point at a given range Rs. In this paper, vehicle's motions relative to the target point are modeled by differential equations. Then a target pointing guidance law is derived using optimal control theories. In addition, it is shown that the proposed guidance law can achieve the goal of target pointing guidance whatever initial headings are.

• Journal of Astronomy and Space Sciences
• /
• v.25 no.4
• /
• pp.445-458
• /
• 2008

Image chain analysis of synthetic aperture radar (SAR) satellite is one of the primary activities for satellite design because SAR image quality depends on spacecraft bus performance as well as SAR payload. Especially, satellite pointing and stability error make worst effect on the original SAR image quality which is implemented by SAR payload design. In this research, Image chain analysis S/W was developed in order to analyze the SAR image quality degradation due to satellite pointing and stability error. This S/W consists of orbit model, attitude control model, SAR payload model, clutter model, and SAR processor. SAR raw data, which includes total 25 point targets in the scene of $5km{\times}5km$ swath width, was generated and then processed for analysis. High resolution mode (spotlight), of which resolution is 1m, was applied. The results of image chain analysis show that radiometric accuracy is the most degraded due to the pointing error. Therefore, the successful design of attitude control subsystem in spacecraft bus for enhancing the pointing accuracy is most important for image quality.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.290-293
• /
• 2006

COMS (Communication, Ocean and Meteorological Satellite) shall be operated with two remote sensing payloads, MI (Meteorological Imager) and GOCI (Geostationary Ocean Color Imager). Since both payloads have rotating mechanisms, the dynamic coupling between two payloads is very important considering the pointing stability during GOCI operation. In addition, COMS adopts a single solar wing to improve the image quality, which leads to the unbalanced solar pressure torque in COMS. As a result, the off-loading of the wheel momentum needs to be performed regularly (2 times per day). Since the frequent off-loading could affect MI/GOCI imaging performance, another suboptimal off-loading time needs to be considered to meet the AOCS design requirements of COMS while having margin enough in the number of thruster actuations. In this paper, preliminary analysis results on the pointing stability and the wheel off-loading time selection with respect to MI/GOCI operations are presented.

• Journal of Korean Society of Steel Construction
• /
• v.21 no.6
• /
• pp.563-574
• /
• 2009

This paper briefly describes the fundamental strategies--path-tracing, pin-pointing, and path-switching--in the computational elastic bifurcation theory of geometrically non-linear single-load-parameter conservative elastic spatial structures. The stability points in the non-linear elasticity may be classified into limit points and bifurcation points. For the limit points, the path tracing scheme that successively computes the regular equilibrium points on the equilibrium path, and the pinpointing scheme that precisely locates the singular equilibrium points were sufficient for the computational stability analysis. For the bifurcation points, however, a specific procedure for path-switching was also necessary to detect the branching paths to be traced in the post-buckling region. After the introduction, a general theory of elastic stability based on the energy concept was given. Then path tracing, an indirect method of detecting multiple bifurcation points, and path switching strategies were described. Next, some numerical examples of bifurcation analysis were carried out for a trussed stardome, and a pin-supported plane circular arch was described. Finally, concluding remarks were given.

• Korean Journal of Remote Sensing
• /
• v.22 no.6
• /
• pp.595-600
• /
• 2006

GOCI is the core paryload of the geostationary satellite COMS(Communication, Ocean and Meteological Satellite) for ocean monitoring. It is scheduled to be launched at the end of 2008. GOCI observes ocean color around the Korean Peninsula over $2500km\times2500km$ area. It used tilted two-axis scan mechanism to observe entire field of view. In this work, the pointing stability of the tilted two-axis method is analyzed and compared with that of gimbal method. The analysis results show that tilted two-axis method gives great stability and it is adequate for geostationary payload. The results can also be used to determine and analyze the mechanism specifications.

• International Journal of Aeronautical and Space Sciences
• /
• v.8 no.1
• /
• pp.129-139
• /
• 2007

In this paper, attitude control laws for simultaneous pointing of multiple spacecrafts are considered under a formation flying scenario. The basic approach lies in adaptive feedback gains using relative attitude information or maneuver time approximation for coordinated attitude control. Each control law is targeted to balancing mean motion or to correcting system response to the slowest satellite. The control gain adaptation is constructed by two approaches. The first one is using variable damping gain to manipulate speed of a fast system response, and the second one uses alternate natural frequency of the system under control. The validity and stability of the proposed approaches are examined analytically and tested through numerical simulations.

• Publications of The Korean Astronomical Society
• /
• v.27 no.5
• /
• pp.391-397
• /
• 2012

The SPICA (SPace Infrared Telescope for Cosmology & Astrophysics) project is a next-generation infrared space telescope optimized for mid- and far-infrared observation with a cryogenically cooled 3m-class telescope. It will achieve the high resolution as well as the unprecedented sensitivity from mid to far-infrared range. The FPC (Focal Plane Camera) proposed by KASI as an international collaboration is a near-infrared instrument. The FPC-S and FPC-G are responsible for the scientific observation in the near-infrared and the fine guiding, respectively. The FPC-G will significantly reduce pointing error down to below 0.075 arcsec through the observation of guiding stars in the focal plane. We analyzed the pointing requirement from the focal plane instruments as well as the error factors affecting the pointing stability. We also obtained the expected performance in operation modes. We concluded that the FPC-G can achieve the pointing stability below 0.075 arcsec which is the requirement from the focal plane instruments.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.692-695
• /
• 1997

Nonlinear robust attitude controller for 3-axis stabilized spacecraft is designed. Robust stability analysis for nonlinear spacecraft system with disturbance is conducted. External disturbances and parametric uncertainties decrease Spacecraft's attitude pointing accuracy. Sliding Mode Control(SMC) provides stability of system in the face of these disturbances and uncertainties. The concept of quadratic boundedness and quadratic stability are applied to the robust analysis for the nonlinear spacecraft system subject to bounded disturbance torques. Numerical simulation is conducted to compare the analysis result and actual nonlinear simulation. The simulation show that analysis result is valid.

• Journal of Astronomy and Space Sciences
• /
• v.21 no.4
• /
• pp.329-342
• /
• 2004

In this paper, we present preliminary feasibility studies on three types of solar observation payloads for future Korean Science and Technology Satellite (STSAT) programs. The three candidates are (1) an UV imaging telescope, (2) an UV spectrograph, and (3) an X-ray spectrometer. In the case of UV imaging telescope, the most important constraint seems to be the control stability of a satellite in order to obtain a reasonably good spatial resolution. Considering that the current pointing stability estimated from the data of the Far ultraviolet Imaging Spectrograph (FIMS) onboard the Korean STSAT-1, is around 1 arc minutes/sec, we think that it is hard to obtain a spatial resolution sufficient for scientific research by such an UV Imaging Telescope. For solar imaging missions, we realize that an image stabilization system, which is composed of a small guide telescope with limb sensor and a servo controller of secondary mirror, is quite essential for a very good pointing stability of about 0.1 arcsec. An UV spectrograph covering the solar full disk seems to be a good choice in that there is no risk due to poor pointing stability as well as that it can provide us with valuable UV spectral irradiance data valuable for studying their effects on the Earth's atmosphere and satellites. The heritage of the FIMS can be a great advantage of developing the UV spectrograph. Its main disadvantage is that two major missions are in operation or scheduled. Our preliminary investigations show that an X-ray spectrometer for the full disk Sun seems to be the best choice among the three candidates. The reasons are : (1) high temporal and spectral X-ray data are very essential for studying the acceleration process of energetic particles associated with solar flares, (2) we have a good heritage of X-ray detectors including a rocket-borne X-ray detector, (3) in the case of developing countries such as India and Czech, solar X-ray spectrometers were selected as their early stage satellite missions due to their poor pointing stabilities, and (4) there is no planned major mission after currently operating Reuven Ramaty High-Energy Solar Spectroscopic Imager (RHESSI) mission. Finally, we present a preliminary design of a solar X-ray spectrometer covering soft X-ray (2 keV) to gamma ray (10 MeV).

• Aerospace Engineering and Technology
• /
• v.8 no.2
• /
• pp.68-74
• /
• 2009

Infra-red earth sensors(IRES) are accommodated in a geostationary multi-functional satellite, which includes optical payloads for observing the earth, to provide pointing reference for the payloads. Even the slight pointing difference between the IRES and the payloads is so critical from the geostationary orbit that can degrade their imaging performance. Therefore, a dedicated support structure is required to guarantee the stability during the flight operation. This paper shows the design justification for the IRES support structure employed in the Communication, Ocean and Meteorological Satellite(COMS). It intends to give an overall design presentation and to justify that this design is compatible with all the requirements in terms of stiffness and strength as well as the stability.